| No. | Brand | J | F | f | T | A | s | S | r |
| CAS12125-02-9 | - | - | - | - | - | - | - | - | - |
| 97-99 | Dodge | - | - | - | - | - | - | - | - |
| 6212-2RS-G93-C3 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 6906DDU | - | - | - | - | - | - | - | - | - |
| A2F10.12.23.28.45.55W3P1 | - | - | - | - | - | - | - | - | - |
| 513150 | Timken | - | - | - | - | - | - | - | - |
| 1100X1100 | - | - | - | - | - | - | - | - | - |
| 4*100W | - | - | - | - | - | - | - | - | - |
| 5050 | - | - | - | - | - | 11 mm | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| XA81420 | Thomson | - | - | - | - | - | - | - | - |
| MVH1-300-F-K-2025 | YUKEN | - | - | - | - | - | - | - | - |
| 070-0020 | Danfoss | - | - | - | - | - | - | - | - |
| Powder/Granular/200g | - | - | - | - | - | - | - | - | - |
| BDZ-155 | - | - | - | - | - | - | - | - | - |
| PC120-5 | Komatsu | - | - | - | - | - | - | - | - |
| JBU733 | TRW | - | - | - | - | - | - | - | - |
| JD10363, | John Deere | - | - | - | - | - | - | - | - |
| SEB100 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| CL2B-dB04 | - | - | - | - | - | - | - | - | - |
| CR99162 Stainless Steel Speedi Sleeve For Shaft Repair | T:196.85 mm; Design variant/feature:TDI/Y2; B:196.85 mm; Mass bearing:235 kg; r3,4 min.:6.4 mm; Calculation factor Y2:2.9; Comparative radial load rating CF:1060 kN; Fatigue load limit Pu:815 kN; D1 ≈:670 mm; d1 ≈:598 mm; |
| AHX215 Withdrawal Sleeve 70x75x34.5mm | Cage Type:Steel; B:23mm; Seals or Shields:Two Rubber Seals; d:40mm; Clearance:C3; Dynamic Load Rating (kN):40.5; SKU:6308dduc3-nsk; D:90mm; Reference Speed Rating (r/min):--; Static Load Rating (kN):24; |
| 87392 / CR87392 Stainless Speedi Sleeve For Shaft Repair | Clearance:Standard; B:17mm; d:35mm; Cage Type:Steel; D:72mm; Availability:In Stock; SKU:6207-2rs-qbl; Seals or Shields:Two Rubber Seals; Weight:0.02 KGS; |
| 86547 / CR86547 Stainless Speedi Sleeve For Shaft Repair | Clearance:Standard; B:18mm; Cage Type:Plastic; Seals or Shields:Open Type; d:40mm; Availability:In Stock; Weight:0.02 KGS; SKU:1208tn-qbl; D:80mm; |
| HMV45E / HMV 45E Hydraulic Nut 227x312x53mm | Housing:SAF 522; J min.:320.675 mm; End plug (suffix Y):EPR 13; Stabilizing ring:SR-22-19; Taconite seal:TER 557; h:45.244 mm; Cap bolt:2 x 3/4-10 UNC; RG:3/8 NPT; Appropriate attachment bolt size G:0.75 in; A2:231.775 mm; |
| 87445 / CR87445 Stainless Speedi Sleeve For Shaft Repair | Cage Type:Steel; Availability:In Stock; SKU:623-2rs-zen; d:3mm; B:4mm; Weight:0.20 KGS; Seals or Shields:Two Rubber Seals; D:10mm; Clearance:Standard; |
| 99315 Speedi Sleeve 79.91x89.99x34.92mm | d:3mm; D:9mm; Clearance:Standard; Availability:In Stock; Seals or Shields:Two Metal Shields; Weight:0.20 KGS; SKU:sf603-2z-zen; Cage Type:Steel; B:5mm; |
| FTRE1629 Thrust Bearing Ring / Thrust Needle Bearing Washer 16x29x3mm | Tolerance housing:H7; Permissible sliding velocity v max.:0.5 m/s; B1:3 mm; B:10 mm; d:14 mm; Coefficient of friction µ min.:0.08; D1:25 mm; Permissible sliding velocity v min.:0 m/s; Specific dynamic load factor K:25 N/mm²; Specific static load factor K0:45 N/mm²; |
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
HMV104E / HMV 104E Hydraulic Nut 522x658x81mm Video