| No. | Brand | J | F | f | T | A | s | S | r |
| 1971-1976 | Timken | - | - | - | - | - | - | - | - |
| 6mm | INA | - | - | - | - | - | - | - | - |
| 100lm | INA | - | - | - | - | - | - | - | - |
| 150W | - | - | - | - | - | - | - | - | - |
| 2018 | - | - | - | - | - | - | - | - | - |
| 30W | - | - | - | - | - | - | - | - | - |
| A4VG125 | Rexroth | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 2200lm | - | - | - | - | - | - | - | - | - |
| (Zhr17) | - | - | - | - | - | - | - | - | - |
| 60W | - | - | - | - | - | - | - | - | - |
| 4.8mm | - | - | - | - | - | - | - | - | - |
| 28X58X16 | - | - | - | - | - | - | - | - | - |
| 10-30 | - | - | - | - | - | - | - | - | - |
| 23pcs | - | - | - | - | - | - | - | - | - |
| GE17-FO-2RS | - | - | - | - | - | - | - | - | - |
| 6206T2 | NTN | - | - | - | - | - | - | - | - |
| 6213-MA-P6-C3 | fag | - | - | - | - | - | - | - | - |
| 6410 | - | - | - | - | - | - | - | - | - |
| BH-1614 | koyo | - | - | - | - | - | - | - | - |
| 35 mm x 72 mm x 17 mm AH308 Withdrawal Sleeve 35x40x29mm | Clearance:Standard; SKU:3205-b-2hrs-tvh-fag; D:52mm; Availability:In Stock; Static Load Rating (kN):14.6; Limiting Speed Rating (r/min):7500; B:20.6mm; Cage Type:Plastic; d:25mm; Dynamic Load Rating (kN):21.2; Size (mm):35 mm x 72 mm x 17 mm ; |
| VHIN 10 Bearing Induction Heater | Limiting Speed Rating (r/min):11400; Dynamic Load Rating (kN):5.1; B:10mm; SKU:s6003-2rsr-fag; Seals or Shields:Two Rubber Seals; Static Load Rating (kN):2.6; d:17mm; Clearance:Standard; D:35mm; Weight:0.04 KGS; |
| 85535 / CR85535 Stainless Speedi Sleeve For Shaft Repair | A2:358.775 mm; P180°:222 kN; h:62.706 mm; Eye bolt:2 x 1/2-13 UNC; Stabilizing ring:SR-40-34; R2:42.862 mm; Ca:107.798 mm; H:419.1 mm; da:182.563 mm; L:749.3 mm; |
| 84642 / CR84642 Stainless Speedi Sleeve For Shaft Repair | Fatigue Load Rating (kN):--; Seals or Shields:Open Type; Cage Type:Steel; D:30mm; B:9mm; Static Load Rating (kN):2.39; SKU:6200c3-nsk; Clearance:C3; Limiting Speed Rating (r/min):24000; Dynamic Load Rating (kN):5.1; |
| 99333 / CR99333 Stainless Speedi Sleeve For Shaft Repair | Cage Type:Brass; SKU:23064-k-mb-c4-qbl; d:320mm; Clearance:C4; Seals or Shields:Open Type; B:121mm; Availability:In Stock; D:480mm; Weight:0.02 KGS; |
| TRC1625 Thrust Bearing Ring / Thrust Needle Bearing Washer 25.4x39.675x2.4mm | B:10mm; Weight:0.04 KGS; D:32mm; Static Load Rating (kN):3.4; Seals or Shields:Open Type; Reference Speed Rating (r/min):26000; SKU:7201-b-jp-uo-fag; Availability:In Stock; Clearance:Standard; Cage Type:Steel; |
| CR99811 Stainless Steel Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; Reference Speed Rating (r/min):6700; Limiting Speed Rating (r/min):4800; Fatigue Load Rating (kN):2.28; Availability:In Stock; D:180mm; d:85mm; Clearance:Standard; Dynamic Load Rating (kN):140; Seals or Shields:Open Type; |
| 99337 / CR99337 Stainless Speedi Sleeve For Shaft Repair | Weight:0.20 KGS; Seals or Shields:Open Type; SKU:xls8-hoffmann; d:8 Inch; D:10.75 Inch; B:1.375 Inch; Availability:In Stock; Clearance:Standard; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
FTRA6590 Thrust Bearing Ring / Thrust Needle Bearing Washer 65x90x1mm Video