| No. | Brand | J | F | f | T | A | s | S | r |
| 4*100W | - | - | - | - | - | - | - | - | - |
| 63B | - | - | - | - | - | - | - | - | - |
| XA81420 | Thomson | - | - | - | - | - | - | - | - |
| 1600 | - | - | - | - | - | - | - | - | - |
| 6.38 | INA | - | - | - | - | - | - | - | - |
| 3m | - | - | - | - | - | - | - | - | - |
| T396ZX | - | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| 71335SN2AVJ1 | Parker | - | - | - | - | - | - | - | - |
| 25kg/Bag | - | - | - | - | - | - | - | - | - |
| 1-4/5" | - | - | - | - | - | - | - | - | - |
| 86 | SKF | - | - | - | - | - | - | - | - |
| 2.0D | - | - | - | - | - | - | - | - | - |
| 301b | - | - | - | - | - | - | - | - | - |
| PHV-1B | INA | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| Qj315n2MPa | - | - | - | - | - | - | - | - | - |
| NNF5009-2LSNV | - | - | 108 mm | - | - | - | - | - | - |
| 610mmx2440mm | - | - | - | - | - | - | - | - | - |
| 1U1779 | - | - | - | - | - | - | - | - | - |
| NU2222 | NSK | - | - | - | - | - | - | - | - |
| QJ232-N2-MPA | fag | - | - | - | - | - | - | - | - |
| 12X3w | - | - | - | - | - | - | - | - | - |
| CR32 | FAFNIR | - | - | - | - | - | - | - | - |
| 12v | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 200W | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 182 | INA | - | - | - | - | - | - | - | - |
| AH236 Withdrawal Sleeve 170x180x69mm | D:200mm; Limiting Speed Rating (r/min):3400; Fatigue Load Rating (kN):71; Weight:0.02 KGS; Reference Speed Rating (r/min):2600; Availability:In Stock; SKU:23124cck/w33-skf; Seals or Shields:Open Type; B:62mm; d:120mm; |
| 65 mm x 120 mm x 31 mm ZM15 Precision Locknut (M15x1)x25x8mm | Mass rod end:0.34 kg; B:16 mm; l4 max.:106 mm; d:20 mm; G:M 20x1.5; C1 max.:13.5 mm; r1 min.:0.3 mm; d4 ≈:28 mm; Specific dynamic load factor K:100 N/mm²; Basic dynamic load rating C:30 kN; Size (mm):65 mm x 120 mm x 31 mm ; |
| 90779 / CR90779 Stainless Speedi Sleeve For Shaft Repair | S:4.763 mm; R2:41.275 mm; Da:319.999 mm; P90°:140 kN; Housing:SAF 536; PG:1/4 NPT; L:679.45 mm; h:60.325 mm; Adapter sleeve assembly:SNW 36x6.5/16; H1:190.5 mm; |
| 17950 Oil Seal 46x68x8mm | Weight:0.02 KGS; Limiting Speed Rating (r/min):2600; Fatigue Load Rating (kN):104; B:80mm; Static Load Rating (kN):1060; Cage Type:Steel; Dynamic Load Rating (kN):780; Reference Speed Rating (r/min):1900; D:230mm; Clearance:C3; |
| 87054 / CR87054 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; Static Load Rating (kN):3.75; B:11mm; Weight:0.02 KGS; SKU:6202-2z-fag; D:35mm; Dynamic Load Rating (kN):8.4; Fatigue Load Rating (kN):0.25; Seals or Shields:Two Metal Shields; d:15mm; |
| HMV45E / HMV 45E Hydraulic Nut 227x312x53mm | Housing:SAF 522; J min.:320.675 mm; End plug (suffix Y):EPR 13; Stabilizing ring:SR-22-19; Taconite seal:TER 557; h:45.244 mm; Cap bolt:2 x 3/4-10 UNC; RG:3/8 NPT; Appropriate attachment bolt size G:0.75 in; A2:231.775 mm; |
| Plummer Block Housings Plummer Block Housings SNV190-F-L + 22318-K + H2318 + TCV518 | Availability:In Stock; Seals or Shields:Open Type; Reference Speed Rating (r/min):1300; Cage Type:Brass; SKU:22336embw33-timken; Clearance:Standard; B:126mm; Static Load Rating (kN):2600; Dynamic Load Rating (kN):2190; D:380mm; |
| 86145 / CR86145 Stainless Speedi Sleeve For Shaft Repair | B:20.00 mm; d:12.000 mm; Basic Dynamic Radial Load Rating C:13300 N; Basic Static Radial Load Rating Co:7800 N; Grease Speed Rating n1:18000 rpm; Fillet Radius rb:0.30 mm; Oil Speed Rating n2:22000 rpm; D:32.0000 mm; Fillet Radius ra:0.64 mm; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
TRD2840 Thrust Bearing Ring / Thrust Needle Bearing Washer 44.45x63.5x3.2mm Video