| No. | Brand | J | F | f | T | A | s | S | r |
| F84003 | Bower | - | - | - | - | - | - | - | - |
| PHV-1B | INA | - | - | - | - | - | - | - | - |
| 5mm/12mm/18mm | - | - | - | - | - | - | - | - | - |
| 4WE6D53/AG24NK4 | Rexroth | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 6207-2RS1 | SKF | - | - | - | - | - | - | - | - |
| 3.6mm | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| MU1012L | Bower | - | - | - | - | - | - | - | - |
| F-150 | NSK | - | - | - | - | - | - | - | - |
| Ap-12 | - | - | - | - | - | - | - | - | - |
| SR45TB1SS | thk | - | - | - | - | - | - | - | - |
| 6212-2RS-G93-C3 | - | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| 400S-M13 | Parker | - | - | - | - | - | - | - | - |
| 1220mmx2440mmx18mm | - | - | - | - | - | - | - | - | - |
| 20W | - | - | - | - | - | - | - | - | - |
| 2016 | - | - | 125 mm | - | - | - | - | - | - |
| 6906DDU | - | - | - | - | - | - | - | - | - |
| 12v | - | - | - | - | - | - | - | - | - |
| 4K19N4TS3 | Danfoss | - | - | - | - | - | - | - | - |
| LS180 | - | - | - | - | - | - | - | - | - |
| 85535 / CR85535 Stainless Speedi Sleeve For Shaft Repair | A2:358.775 mm; P180°:222 kN; h:62.706 mm; Eye bolt:2 x 1/2-13 UNC; Stabilizing ring:SR-40-34; R2:42.862 mm; Ca:107.798 mm; H:419.1 mm; da:182.563 mm; L:749.3 mm; |
| AHX3220 Withdrawal Sleeve(matched Bearing: 23220CCK/W33) | Basic Static Radial Load Rating Co:73500 N; Accessories:Seal & Snap-Ring; Grease Speed Rating Open/Shielded n1:3800 rpm; Sealed Speed Rating n3:2600 rpm; B:30.00 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; Oil Speed Rating n2:4500 rpm; Basic Dynamic Radial Load Rating C:95600 N; Fillet Radius ra:2.00 mm; D:160.0000 mm; |
| AH324 Withdrawal Sleeve 115x120x69mm | d:45mm; Availability:In Stock; Weight:0.02 KGS; SKU:2309tn-qbl; Cage Type:Plastic; Clearance:Standard; D:100mm; Seals or Shields:Open Type; B:36mm; |
| HMV130E / HMV 130E Hydraulic Nut 652x804x89mm | Weight:3.65 KGS; Limiting Speed Rating (r/min):2800; B:33mm; Cage Type:Steel; Clearance:Standard; Dynamic Load Rating (kN):108; SKU:6028-2z-fag; Availability:In Stock; Fatigue Load Rating (kN):4.95; Seals or Shields:Two Metal Shields; |
| TRB3648 Thrust Bearing Ring / Thrust Needle Bearing Washer 57.15x76.2x1.6mm | D:120mm; B:49.2mm; Seals or Shields:Open Type; d:55mm; Availability:In Stock; Weight:0.02 KGS; Cage Type:Plastic; Clearance:C3; SKU:3311atn9/c3-qbl; |
| AHX215 Withdrawal Sleeve 70x75x34.5mm | Cage Type:Steel; B:23mm; Seals or Shields:Two Rubber Seals; d:40mm; Clearance:C3; Dynamic Load Rating (kN):40.5; SKU:6308dduc3-nsk; D:90mm; Reference Speed Rating (r/min):--; Static Load Rating (kN):24; |
| 87070 / CR87070 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; Clearance:Standard; Weight:0.02 KGS; D:8.125 Inch; d:3.5 Inch; B:1.75 Inch; Seals or Shields:Open Type; SKU:ams28-skf; |
| TRA815 Thrust Bearing Ring / Thrust Needle Bearing Washer 12.7x23.8x0.8mm | Static Load Rating (kN):1660; Seals or Shields:Open Type; Clearance:C4; Fatigue Load Rating (kN):153; SKU:23232cck/c4w33-skf; Dynamic Load Rating (kN):1220; Availability:In Stock; D:290mm; Limiting Speed Rating (r/min):2200; Weight:0.02 KGS; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
99317 / CR99317 Stainless Speedi Sleeve For Shaft Repair Video