| No. | Brand | J | F | f | T | A | s | S | r |
| 6206-2RS1/C3 | SKF | - | - | - | - | - | - | - | - |
| 10-10-30 | - | - | - | - | - | - | - | - | - |
| 86 | SKF | - | - | - | - | - | - | - | - |
| 8*10W | - | - | - | - | 400.05 mm | - | - | - | - |
| SL01 | - | - | - | - | - | - | - | - | - |
| GS2068 | - | - | - | - | - | - | - | - | - |
| 400S-M13 | Parker | - | - | - | - | - | - | - | - |
| 12feet | - | - | - | - | - | - | - | - | - |
| 314NPP | FAFNIR | - | - | - | - | - | - | - | - |
| 100lm/W | - | - | - | - | - | - | - | - | - |
| 5/10/20 | - | 47.6 mm | - | - | - | - | - | - | - |
| 110A-036-AS-0, | Parker | - | - | - | - | - | - | - | - |
| 17" | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| LPVD140 | - | - | - | - | - | - | - | - | - |
| 3m | - | - | - | - | - | - | - | - | - |
| 387-9434 | - | - | - | - | - | - | - | - | - |
| IR110X120X30 | INA | - | - | - | - | - | - | - | - |
| 5I-7686 | - | - | - | - | - | - | - | - | - |
| 1.5-2.5t/H | - | - | - | - | - | - | - | - | - |
| CL2B-dB04 | - | - | - | - | - | - | - | - | - |
| (JHK-S06) | - | - | - | - | - | - | - | - | - |
| G9 | - | - | - | - | - | - | - | - | - |
| 22217-EKC3W33 | SKF | - | - | - | - | - | - | - | - |
| VT250FD | NTN | - | - | - | - | - | - | - | - |
| 1648 | - | - | - | - | - | - | - | - | - |
| 41100870 | Parker | - | - | - | - | - | - | - | - |
| KTB531 | - | - | - | - | - | - | - | - | - |
| 3307 | - | - | - | - | - | - | - | - | - |
| 90% | - | - | - | - | - | - | - | - | - |
| TRB512 Thrust Bearing Ring / Thrust Needle Bearing Washer 7.925x19.05x1.6mm | D:39.878mm; B:13.843mm; Static Load Rating (kN):26; Availability:In Stock; SKU:lm11749/lm11710-koyo; Dynamic Load Rating (kN):31.8; Cage Type:Steel; Oil Limiting Speed (r/min):14000; Grease Limiting Speed (r/min):11000; d:17.462mm; |
| 0.591 Inch | 15 Millimeter x 1.378 Inch | 35 Millimeter x 0.626 Inch | 15.9 Millimeter CP6110145 Thrust Plate 110x143.8x6mm | Cage Type:Steel; Availability:In Stock; SKU:22226-e1-fag; Dynamic Load Rating (kN):760; Seals or Shields:Open Type; d:130mm; Static Load Rating (kN):890; Limiting Speed Rating (r/min):3000; B:64mm; Clearance:Standard; Size (mm):0.591 Inch | 15 Millimeter x 1.378 Inch | 35 Millimeter x 0.626 Inch | 15.9 Millimeter ; |
| FTRC75100 Thrust Bearing Ring / Thrust Needle Bearing Washer 75x100x2mm | Seals or Shields:Open Type; SKU:22316-e1a-k-ma-t41a-; Weight:0.02 KGS; D:170mm; Cage Type:Brass; d:80mm; Availability:In Stock; Clearance:Standard; B:58mm; |
| TKTL 10 Infrared Thermometer | ra max.:0.3 mm; da min.:34.6 mm; Mass bearing:0.12 kg; D:55 mm; Calculation factor f0:14.7; Basic dynamic load rating C:13.8 kN; B:13 mm; r1,2 min.:1 mm; D1 ≈:46.8 mm; d:30 mm; |
| AOH30/950 (230/950CAK, 230/950CCK, 230/950CAK/W33, C30/950KMB Bearing Withdrawal Sleeve) | Oil Speed Rating Open/Shielded n2:3600 rpm; Basic Dynamic Radial Load Rating C:157000 N; B:45.00 mm; Accessories:Snap-Ring; Fillet Radius ra:2.50 mm; Grease Speed Rating Open/Shielded n1:3000 rpm; Basic Static Radial Load Rating Co:153000 N; D:190.0000 mm; d:75.000 mm; |
| FTRA85110 Thrust Bearing Ring / Thrust Needle Bearing Washer 85x110x1mm | Lw:21.8 mm; r1 max.:0.8 mm; r2 max.:1 mm; Mass needle roller:1.65 g; r1,2 min.:0.3 mm; Dw:3.5 mm; |
| AOHX3292G (23292CAK/W33, 23292CAK, 23292CCK Bearing Withdrawal Sleeve) | B:13mm; Seals or Shields:Open Type; Weight:0.31 KGS; SKU:6820-nsk; Clearance:Standard; Oil Limiting Speed (r/min):5600; d:100mm; Static Load Rating (kN):23; Cage Type:Steel; D:125mm; |
| 86468 / CR86468 Stainless Speedi Sleeve For Shaft Repair | Oil Speed Rating Open/Shielded n2:7500 rpm; Grease Speed Rating Open/Shielded n1:6200 rpm; D:85.0000 mm; Accessories:Two Shields; Basic Static Radial Load Rating Co:32500 N; Basic Dynamic Radial Load Rating C:39300 N; B:19.00 mm; Fillet Radius ra:1.00 mm; d:45.000 mm; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
BIC1015 Inner Ring 15x20.8x15mm Video