| No. | Brand | J | F | f | T | A | s | S | r |
| 071N1151 | Danfoss | - | - | - | - | - | - | - | - |
| HPIB070 | - | - | - | - | - | - | - | - | - |
| 8155 | - | - | - | - | - | - | - | - | - |
| Sg02 | - | - | - | - | - | - | - | - | - |
| F600B-V | Parker | - | - | - | - | - | - | - | - |
| 6309ZZ | NTN | - | - | - | - | - | - | - | - |
| Qj315n2MPa | - | - | - | - | - | - | - | - | - |
| 1220*2440mm | - | - | - | - | - | - | - | - | - |
| SL01 | - | - | - | - | - | - | - | - | - |
| [50pcs] | - | - | - | - | - | - | - | - | - |
| 2700K | - | - | - | - | - | - | - | - | - |
| 2019 | Danfoss | - | - | - | - | - | - | - | - |
| 5182 | - | - | - | - | - | - | - | - | - |
| SEB100 | - | - | - | - | - | - | - | - | - |
| 30mm | - | - | - | - | - | - | - | - | - |
| Max40d | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| (6D31) | - | - | 26.5 mm | - | - | - | - | - | - |
| 17013 | INA | - | - | - | - | - | - | - | - |
| 5mm/12mm/18mm | - | - | - | - | - | - | - | - | - |
| 3W | - | - | - | - | - | - | - | - | - |
| FZR750 | - | - | - | - | - | - | - | - | - |
| 25mm | - | - | - | - | - | - | - | - | - |
| AOHX30/600 (230/600CAK/W33, C30/600KM, 230/600CAK, 230/600CCK Bearing Withdrawal Sleeve) | Availability:In Stock; Clearance:C3; Limiting Speed Rating (r/min):38000; Dynamic Load Rating (kN):5; SKU:6000-2z-c3-fag; Cage Type:Steel; Weight:0.02 KGS; Static Load Rating (kN):1.97; d:10mm; Seals or Shields:Two Metal Shields; |
| 160 mm x 290 mm x 48 mm CP5578 Thrust Plate 55x77.4x0.8mm | Reference Speed Rating (r/min):3950; Availability:In Stock; Limiting Speed Rating (r/min):6300; Weight:0.02 KGS; Dynamic Load Rating (kN):211; B:31mm; SKU:22214-e1-c3-fag; Static Load Rating (kN):226; Cage Type:Steel; Clearance:C3; Size (mm):160 mm x 290 mm x 48 mm ; |
| 84642 / CR84642 Stainless Speedi Sleeve For Shaft Repair | Fatigue Load Rating (kN):--; Seals or Shields:Open Type; Cage Type:Steel; D:30mm; B:9mm; Static Load Rating (kN):2.39; SKU:6200c3-nsk; Clearance:C3; Limiting Speed Rating (r/min):24000; Dynamic Load Rating (kN):5.1; |
| 99409 / CR99409 Stainless Speedi Sleeve For Shaft Repair | D:5 Inch; Seals or Shields:Open Type; Availability:In Stock; SKU:ms16ac-hoffmann; Clearance:Standard; d:2.25 Inch; B:1.25 Inch; Weight:0.02 KGS; |
| TMDT 2-34 Gas And Liquid Probe | d:100.000 mm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:4000 rpm; Fillet Radius ra:2.00 mm; Grease Speed Rating n1:3400 rpm; B:34.00 mm; Basic Static Radial Load Rating Co:143000 N; Basic Dynamic Radial Load Rating C:153000 N; D:180.0000 mm; |
| TRA512 Thrust Bearing Ring / Thrust Needle Bearing Washer 7.925x19.05x0.8mm | Dynamic Load Rating (kN):245; Static Load Rating (kN):255; Limiting Speed Rating (r/min):6300; Cage Type:Brass; Availability:In Stock; Seals or Shields:Open Type; B:41mm; D:180mm; Weight:5.54 KGS; d:85mm; |
| Plummer Block Housings Plummer Block Housings SNV190-F-L + 22318-K + H2318 + TCV518 | Availability:In Stock; Seals or Shields:Open Type; Reference Speed Rating (r/min):1300; Cage Type:Brass; SKU:22336embw33-timken; Clearance:Standard; B:126mm; Static Load Rating (kN):2600; Dynamic Load Rating (kN):2190; D:380mm; |
| TRD916 Thrust Bearing Ring / Thrust Needle Bearing Washer 14.275x25.4x3.2mm | R2:22.225 mm; da:85 mm; End plug (suffix Y):EPR 9; Stabilizing ring:SR-17-14; Appropriate attachment bolt size G:0.625 in; P180°:25.4 kN; RG:3/8 NPT; PosiTrac Plus contact element (dc shaft position):B10724-64; Bearing:22217 E; Pa:16.5 kN; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
EAZ 222-1 Induction Heater Video