| No. | Brand | J | F | f | T | A | s | S | r |
| 121341J | DAIKIN | - | - | - | - | - | - | - | - |
| 38W | INA | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 7310BDY | SKF | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| 315 | - | - | - | - | - | - | - | - | - |
| CH-47914 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| Rasey1-N-HLC | INA | - | - | - | - | - | - | - | - |
| GE80ES | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| 12125-02-9 | - | - | - | - | - | - | - | - | - |
| E70 | - | - | - | - | - | - | - | - | - |
| 500W | - | - | - | - | - | - | - | - | - |
| E55 | INA | - | - | - | - | - | - | - | - |
| ZAX330-3 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 100W | - | - | - | - | - | - | - | - | - |
| 7411AM, | SKF | - | - | - | - | - | - | - | - |
| MM212KS2CR | FAFNIR | - | - | - | - | - | - | - | - |
| 20152 | - | - | - | - | - | - | - | - | - |
| 1220 | SKF | - | - | - | - | - | - | - | - |
| AOH24168(24168CCK, 24168CAK, 24168ECCK30/W33 Bearing Withdrawal Sleeve) | SKU:6314ddu-nsk; Weight:2.57 KGS; Cage Type:Steel; Availability:In Stock; D:150mm; Grease Limiting Speed (r/min):3200; Seals or Shields:Two Rubber Seals; B:35mm; Dynamic Load Rating (kN):104; d:70mm; |
| H2312X Adapter Sleeve 55x80x62mm | B:60.3mm; Availability:In Stock; d:100mm; D:180mm; Weight:0.02 KGS; Fatigue Load Rating (kN):60; Seals or Shields:Open Type; SKU:23220-e1-tvpb-c3-fag; Dynamic Load Rating (kN):550; Cage Type:Plastic; |
| 99465 / CR 99465 Stainless Speedi Sleeve For Shaft Repair | Permissible sliding velocity v min.:0.25 m/s; D:41 mm; d:35 mm; Mass bushing:0.055 kg; Coefficient of friction µ min.:0.05; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; Specific dynamic load factor K:10 N/mm²; B:25 mm; Permissible sliding velocity v max.:5 m/s; |
| CPR81216 Thrust Plate 80x115x8.5mm | B:0.688 Inch; Seals or Shields:Open Type; d:0.875 Inch; D:2.25 Inch; Weight:0.02 KGS; SKU:ams7-skf; Availability:In Stock; Clearance:Standard; |
| AOH30/900 (230/900CAK, 230/900CCK, 230/900CAK/W33, C30/900KM Bearing Withdrawal Sleeve) | Seals or Shields:Open Type; d:60mm; SKU:30212-koyo; Grease Limiting Speed (r/min):3500; B:23.75mm; Availability:In Stock; Dynamic Load Rating (kN):133; Static Load Rating (kN):127; Oil Limiting Speed (r/min):4700; Cage Type:Steel; |
| AH3234,AH3234G Withdrawal Sleeve(matched Bearing:23234CCK/W33) | B:105 mm; Design (sliding contact surface combination):Steel/steel; Basic static load rating C0:6800 kN; C:80 mm; d:160 mm; D:230 mm; b:13.5 mm; rb max.:1 mm; da max.:170 mm; da min.:169.5 mm; |
| AOH241/710 (241/710ECAK30/W33, 241/710CCK, 241/710CAK, 241/710CCK/W33 Bearing Withdrawal Sleeve) | D:160mm; B:40mm; Clearance:Standard; Cage Type:Brass; Static Load Rating (kN):375; SKU:22218-e1a-k-m-fag; d:90mm; Weight:0.02 KGS; Reference Speed Rating (r/min):3400; Dynamic Load Rating (kN):345; |
| HMV126E / HMV 126E Hydraulic Nut 632x782x88mm | Seals or Shields:Open Type; D:8.125 inch; B:1.75 inch; Weight:0.20 KGS; d:3.5 inch; Availability:In Stock; SKU:mj3.1/2-r&m; Clearance:Standard; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
AHX3130G Withdrawal Sleeve(matched Bearing:23130CCK/W33, 22230CCK/W33, C3130K, C2230K) Video