| No. | Brand | T | Z | r | f | R | s | S | M |
| 50W | - | - | - | - | - | - | - | - | - |
| 45W | - | - | - | - | - | - | - | - | - |
| 7024bgm | - | - | - | - | - | - | - | - | - |
| 260HP | - | - | - | 39 | - | - | - | - | - |
| 1908SZZ | - | - | - | - | - | - | - | - | - |
| 90% | - | - | - | - | - | - | - | - | - |
| 2018 | - | - | - | - | - | - | - | - | - |
| AR340067 | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 5W | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 3723522220 | Rexroth | 21 mm | - | - | - | - | - | - | - |
| JTC7619 | TRW | - | - | - | - | - | - | - | - |
| 16oz | - | - | - | - | - | - | - | - | - |
| 200TPH | - | - | - | - | - | - | - | - | - |
| CB1100RB/RC/RD | NTN | - | - | - | - | - | - | - | - |
| 6008 | SKF | - | - | - | - | - | - | - | - |
| 30% | - | - | - | - | - | - | - | - | - |
| 40W | - | - | - | - | - | - | - | - | - |
| Ads73311 | - | - | - | - | - | - | - | - | - |
| County,California,CA,HABS,14 | Parker | - | - | - | - | - | - | - | - |
| 5W | - | - | 120 mm | - | - | - | - | - | - |
| 23218KVJW33C3 | FAFNIR | - | - | - | - | - | - | - | - |
| RB15030C1 Separable Outer Ring Crossed Roller Bearing 150x230x30mm | Material :Cast Iron; G:M16; H2:28.00 mm; Bearing:21309K; Shaft Diameter d:1 1/2 in; Housing Mass:4.5 Kg; Housing:SNT 511-609; Locating Rings (width x OD):SR100X9.5; N:18 mm; Max Oil Speed:6500; |
| 25 mm x 62 mm x 17 mm RA8008UCC0 Crossed Roller Bearing 80x96x8mm | Bore Diameter (mm):47; maximum rpm:8500 RPM; Fatigue load limit Pu:0.212 kN; Category:Single Row Ball Bear; Rolling Element:Ball Bearing; Da - max.:45 mm; Bore:1.181 Inch | 30 Mill; ra - max.:0.3 mm; Minimum Buy Quantity:N/A; bore type:Round; Size (mm):25 mm x 62 mm x 17 mm ; |
| RE7013UUCCO crossed roller bearing (70x100x13mm) High Precision Robotic Arm Use | Basic dynamic load rating (C):100 kN; r:39; Bearing number:RS-5010; doh:2.5; r_min:0.6; C0:158; D_:80; Outer Diameter (mm):80; Cx:0.4; da_min:53.5; |
| RA9008C1 Crossed Roller Bearing 90x106x8mm | R:1,5 mm; D:146,05 mm; Size (mm):107.95x146.05x49.212; Bore Diameter (mm):107,95; Bearing number:L521949/L521910D+L52; T:49,212 mm; Brand:Timken; r:0,8 mm; d:107,95 mm; C:39,688 mm; |
| RE14016UUC0P5 Crossed Roller Bearing 140x175x16mm | Y - ISO Factor3:1.48; Series:5700; Cg - Geometry Factor:0.094; e - ISO Factor2:0.41; r - Cup Backface To Clear Radius1:0.130 in; Design Units:Imperial; Db - Cup Backface Backing Diameter:4.69 in; C - Cup Width:1.3750 in; Da - Cup Frontface Backing Diameter:5.16 in; Cup Part Number:5735; |
| XSU140744 Crossed Roller Bearing 674x814x56mm | Material:Inner ring and outer; Inner Width (Bi):115.0000; Mis-alignment Angle (a deg.):2; Bore Diameter (mm):160; Brand:AST; Outer Width (Bo):109.0000; Weight (g):18,600.00; Max. housing corner radius, or 45 deg. chamfer (ch):1.000; Bearing Type - double fractured:extra wide, sealed; Dynamic Load Rating (Cr):3,430,000; |
| RE3010UC0 / RE3010C0 Crossed Roller Bearing 30x55x10mm | Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:151000 lbf; a - Effective Center Location4:0.4 in; da - Cone Frontface Backing Diameter:8.03 in; Cg - Geometry Factor:0.128; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:18400 lbf; Design Units:Imperial; B - Cone Width:1.9685 in; C1 - Dynamic Radial Rating (1 million revolutions)6:86800 lbf; R - Cone Backface To Clear Radius3:0.14 in; |
| CRBS16013A Crossed Roller Bearing 160x186x13mm | Bearing Length, Nominal (B):100.000; Bore Diameter (mm):125; Housing Bore Dia. (Dh) - 130 +0.040 / -0:130 +0.040 / 0; Average Clearance (Cd):0.1600; ID Chamfer Length (Ci):0.600; Bearing Bore after Mounting (di):125 +0.240 / +0.080; Bearing number:AST850BM 125100; Outer Diameter (mm):130; Bearing Outside Diameter, Nominal(Do):130.000; Bearing Length Tolerance (B tol.) - +0 / -0.40:+0 / 0.40; |
Crossed Roller Bearings - Motion
Results 1 - 12 of 157 — Crossed roller bearings contain rollers in an X arrangement to support axial and radial loads in both directions. They also handle moment ...
Crossed Roller Bearings - Hiwin Corporation
HIWIN Corporation Crossed Roller Bearings consist of an outer ring, an inner ring, and a plurality of rollers and spacers. The roller lies between the inner ...
Cross-Roller Ring | THK Official Web Site | [ Global English ]
The Cross Roller Ring is a roller bearing with high rotation accuracy capable of bearing loads in every direction. Because it has orthogonally arranged ...
Crossed Roller Rail Sets - Del-Tron Precision
Del-Tron's crossed roller rail sets (or crossed roller bearings) are compact, precision rail sets that can support and guide high loads with high accuracy, ...
The Basics of Crossed Roller Bearings
Feb 13, 2018 — Crossed roller bearings provide more accuracy, rigidity, and weight-bearing capacity for linear motion than other commonly used ...
Thrust Crossed Roller Bearing | The Timken Company
Timken designs crossed roller bearings (TXRs) to offer the highest levels of rotation accuracy and rigidity while conserving space and saving material costs ...
Crossed Roller Bearings - IKO International
IKO designs and manufactures a variety of crossed roller bearings that can handle radial, thrust and moment loads at the same time. These compact bearings ...
Cross Roller Bearing - Won Shaft
CROSS ROLLER BEARING ... - A separable outer ring and rotary inner ring type. - It can be used for cases which need running accuracy of an inner ring. - An ...
Crossed Roller Bearings | Schaeffler Group USA Inc.
Crossed-roller bearings are bearings for high-precision applications whose dimensions conform to ISO dimension series 18 as per DIN 616.
BFKB353216 Crossed Roller Bearing 350x470x50mm Video