| 29396MB Thrust Spherical Roller Bearing 480x730x150mm | Characteristic outer ring frequency, BPF0:6.77 Hz; Fatigue limit load, Cu:13.9 kN; Nlim (grease):5,600 rpm; r1s min:1.1 mm; Da max:92 mm; d1:70.8 mm; rs min:1.5 mm; ra max:1.5 mm; Characteristic inner ring frequency, BPFI:9.23 Hz; Characteristic rolling element frequency, BSF:6.35 Hz; |
| AX6085 Needle Thrust Bearing 60x85x2.8mm | Type:Bearings with Housin; Bearing Retained:No; Seals:ZZ (Double Shield); Height H(mm):25 ～ 50; Shape:T-Shaped; Bearing Material:Stainless Steel; Days to Ship:8 Days; Bearing Part Number:6003; |
| 81226M Thrust Roller Bearing 130x190x45mm | Thread G:M200x3; Lockwasher and Lockplates:MB40; L:176.00 mm; D3:250 mm; Weight:13.9 Kg; C:32 mm; Appropriate Hydraulic Nut:HMV40; d1:180.00 mm; Locknut:KM40; |
| NKXR20Z+IR Bearing | Da max:92 mm; Static load, C0:153 kN; Max operating temperature, Tmax:120 °C; Dynamic load, C:137 kN; r1s min:1.5 mm; F:58.5 mm; Characteristic rolling element frequency, BSF:4.7 Hz; Manufacturer Name:NTN; ra max:1.5 mm; Brand:NTN; |
| ZARN1545-L-TV Bearing | Fatigue limit load, Cu:2.7 kN; Static load, C0:59.8 kN; Nref:6,400 rpm; Min operating temperature, Tmin:-20 °C; D1:123.7 mm; Nlim:6,500 rpm; ra max:2 mm; Characteristic outer ring frequency, BPF0:3.07 Hz; Mass:2.08 kg; D:140 mm; |
| 32217 Tapered Roller Bearing | Machining:No; Rolling Element Material:Bearing Steel; Accessory:With cast iron cover; Fit:J7; Basic Load Rating, Static Rating(N):44100; d:70; Seal:Nitrile; Diameter series symbol:Used for Light load; Surface Treatment:No; Basic Load Rating, Dynamic Rating(N):62200; |
| 518400Y Double Direction Thrust Taper Roller Bearing 180x400x200mm | H1:13 mm; Designation of closed end cover:SCC209; S:19 mm; B:49.2 mm; Recommended tightening torque for set screw:8.3 Nm; d:44.45 mm; A:51 mm; H:54 mm; T max.:100 °C; N:M12; |
| 29264E, 29264-E-MB Thrust Roller Bearing 320x440x73mm | Designation of housing:P203-; N:13mm; d1:27.2 mm; J:95 mm; L:127 mm; H:30.2 mm; Weight:0.63 kg; d:12.7 mm; Recommended tightening torque for set screw:3.7 Nm; G:M6x1; |