| No. | Brand | S | F | E | J | w | L | s | d |
| 17X47X14 | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | 0.7500 in |
| pc200-6 | - | - | - | - | - | - | - | - | 0.5000 in |
| 18mm | - | - | - | - | - | - | - | - | 0.2500 in |
| 2FRE | Rexroth | - | - | - | - | - | - | - | 15 mm |
| 100W-1000W | - | - | - | - | - | - | - | - | - |
| 6307.C3 | fag | - | - | - | - | - | - | - | 2.2500 in |
| Qj317 | - | - | - | - | - | - | - | - | 140mm |
| (FOH-H3606) | - | - | - | - | - | - | - | - | 260mm |
| 100W | - | - | - | - | - | - | - | - | 45 mm |
| 4] | - | - | - | - | - | - | - | - | 15mm |
| IP68 | - | - | - | - | - | - | - | - | 1.8125 in |
| 3-Layer | - | - | - | - | - | - | - | - | 2-15/16 in |
| 22208EMK | - | - | - | - | - | - | - | - | - |
| 100 | - | - | - | - | - | - | - | - | 2.4375 in |
| NHM3 | - | - | - | - | - | - | - | - | - |
| 45W | - | - | - | - | - | - | - | - | - |
| 3/8 | Danfoss | - | - | - | - | - | - | - | 3.0000 in |
| 50%Min | - | - | - | - | - | - | - | - | 1.1875 in |
| 430.25.15. | - | - | - | - | - | - | - | - | 25 mm |
| 2 | - | - | - | - | - | - | - | - | 2.5mm |
| 40W | - | - | - | - | - | - | - | - | 10mm |
| NJ315EG | Nachi | - | - | - | - | - | - | - | 1.2500 in |
| 18mm | - | - | - | - | - | - | - | - | 3/4 in |
| M84548/M84510 Inched Tapered Roller Bearing 25.4×57.2×19.4mm | D:160 mm; static load capacity:450000 N; application:Vibratory Applicatio; precision rating:Not Rated; closure type:Open; cage material:Brass; bore type:Tapered 1:12; d:75 mm; maximum rpm:4300 RPM; outer ring width:55 mm; |
| 622/613X Bearing 55.991x120x40.923mm | max v value:1000 sfpm; manufacturer catalog:Click here; overall length:0.3750 in; manufacturer upc number:717905167256; backing material:Steel; bushing type:Plain; inside diameter:0.5000 in; operating temperature range:-328 to 536 ºF; maximum pv value:51000; overall outside diameter:19/32 in; |
| L44643/10 Inch Taper Roller Bearing | overall length:10.4375 in; locking device:Concentric Collar; maximum rpm:1950 RPM; D:8-1/8 in; base to bore centerline:3.2500 in; standards met:ANSI/ABMA STD 1; bore type:Round; lubrication type:Lubrication Fitting; d:2.9375 in; expansion type:Expansion Bearing &#; |
| L44649/10 Bearing 26.988x50.292x14.224mm | bearing material:Cast Bronze C93200 &; Weight:0.626 lb; maximum v value:750 fp/min; maximum p value:4000 psi; maximum pv value:75000; operating temperature range:Max 500 ºF; standards met:83-7-7-3, ASTM B505,; material specification:SAE 660 (C932&#; d:1-1/2 in; manufacturer catalog:Click here; |
| EE420750D/421450 Inched Taper Roller Bearings 190.5×368.3×158.75mm | expansion type:Non-Expansion Bearin; outer ring width:0.6290 in; D:2.4409 in; housing type:Bearing Insert; manufacturer upc number:662798274249; inner ring width:1.4060 in; cage material:Nylon; maximum rpm:3500 rpm; lubricant:#2 Lithium; seal type:Contact; |
| LM72849/LM72810 Inched Tapered Roller Bearing 22.61×47×15.5mm | compatible cone:9285, 9278; D:6.3750 in; single or double cup:Double Cup; material:Chrome Steel; cup width:2.7810 in; flange type:Non-Flanged Cup; lubrication hole type:No Hole; manufacturer upc number:053893156514; abma precision rating:Class 2; finish/coating:Uncoated; |
| 290*440*310mm 517796(FC5884300/YA3) Rolling Mill Bearing | d:1 in; maximum p value:2000 psi; D:1-1/4 in; bearing material:Oil-Impregnated Sint; maximum v value:1200 fp/min; sleeve bearing type:Flanged Bearing; material specification:SAE 841; flange width:3/16 in; groove/plug type:None; |
| CRI-8026 Bearing 40×80×38mm | outer ring width:15.88 mm; maximum rpm:5000 RPM; series:7500; inner ring width:19.05 mm; bearing material:Steel; dynamic load capacity:2595 lb; internal clearance:C0; operating temperature range:Maximum of +300; cage material:Nylon; closure type:Double Sealed; |
Tapered Roller Bearings - NSK
Bearings of this type use conical rollers guided by a back-face rib on the cone. These bearings are capable of taking high radial loads and axial loads in ...
Tapered Roller Bearings Engineering Data
Tapered roller bearings are bearings that can take both axial loads (sideways or thrust forces), as well as radial loads (downward force). Looking at the ...
Tapered Roller Bearings - Large Diameter Tapered Bearings
Tapered roller bearings are used in a variety of industrial applications. The tapered rollers allow the bearings to accommodate heavy radial, ...
Taper Roller Bearings, Inc..
Taper Roller Bearings, Inc. offers made-to-order Class 3 precision bearings. Our carefully calibrated machines certify the bearings to ABMA Class 3 ...
Tapered Roller Bearings | The Timken Company
Single-row tapered roller bearings are the most basic and widely used, consisting of a cone assembly and a cup. Timken patented the first in 1898 and today ...
Tapered roller bearing - Wikipedia
A tapered roller bearing is a unit that consists of both tapered raceways (inner and outer rings), and tapered rollers. The construction is intended for ...Description · History · Applications
Tapered roller bearings - features, benefits, applications ...
SKF Tapered roller bearings are ideal for supporting simultaneou radial and axial loads. They provide high reliability and long service life.
Tapered Roller Bearings
Results 1 - 24 of 1000+ — Online shopping for Tapered - Roller Bearings from a great selection at Industrial & Scientific Store.
Premium Conical Tapered Roller Bearings - NTN Americas
NTN tapered roller bearings are designed for the most demanding applications in industries such as mining, forestry and steel manufacturing.
JP12049A/JP12010 Inch Tapered Roller Bearings 120x170x27mm Video