| Precision 09074/09196 Inched Taper Roller Bearings19.05x49.225x23.02mm | material:O1 Tool Steel; thickness:1/8 in; width tolerance:+0.000/&#x; meets industry standards by:SAE, AISI; thickness tolerance:±0.001 in; length:18 in; industry standards met:AISI/SAE O1; length tolerance:±1/4 in; |
| 33221 Taper Roller Bearing 105*190*68mm | Mass bearing:0.14 kg; da min.:22.6 mm; b:4.5 mm; Calculation factor Y2:1.07; h:3.5 mm; B:14 mm; ra max.:1 mm; a:22 mm; r1,2 min.:1 mm; Calculation factor Y0:0.58; |
| 30204-A Bearing 20X47X14mm | material specification:Oilite®, Synthet; sleeve bearing type:Plain Sleeve; D:1 in; d:7/8 in; standards met:SAE 841, CT-1000-K26; operating temperature range:-35 °F to +; overall length:3/4 in; maximum p value:Static 8000 / D; maximum v value:1200 (sfm); number per bag:10; |
| 32240 Tapered Roller Bearings Factory 200*360*104mm | bore type:Round; B:4.6250 in; operating temperature range:Maximum of +225; seal type:Contact with Flinger; bolt size:1/2 in; finish/coating:Uncoated; housing material:Cast Iron; duty type:Standard Duty; D:3.6250 in; mounting type:Four-Bolt Flange; |
| H715334/H715311A Inch Taper Roller Bearing 61.913x136.525x46.038mm | Dynamic Load Rating (kN):9.56; Seals or Shields:Open Type; B:9mm; Clearance:Standard; Preload:Medium; Weight:0.08 KGS; Static Load Rating (kN):10.2; Cage Type:Plastic; Grease Limiting Speed (r/min):16000; Oil Limiting Speed (r/min):24000; |
| 32922/Q Tapered Roller Bearings | base width:3 in; travel:30 in; series:CP; D:44 in; manufacturer catalog number:019203; overall length:46 in; finish/coating:Uncoated; frame type:Center Pull; rod diameter:3/4 in; overall height:7 in; |
| 33109 Tapered Roller Bearing 45×80×26mm | shank thread size:5/16-24; housing material:17-4 PH Stainless St; ball width:0.4370 in; radial static load capacity:5929 lbf; head width:0.3440 in; thread direction:Right Hand; ball material:440 C Stainless Stee; manufacturer catalog:www.aurorabearing.co; grade:Precision; rod end type:Female Threaded; |
| 30208 Tapered Roller Bearing | dynamic load capacity:32100 lb; D:130 mm; fillet radius:2.54 mm; outer ring width:31 mm; finish/coating:Uncoated; series:Medium; internal clearance:C0; cage material:Steel; precision rating:Not Rated; static load capacity:35300 lbs; |