| No. | Brand | S | F | E | J | w | L | s | d |
| (DS-GSG102) | - | - | - | - | - | - | - | - | 1.4375 in |
| 4B8366H-STD | - | - | - | - | - | - | - | - | - |
| 1210 | - | - | - | - | - | - | - | - | 15.0000 in |
| 15X32X9 | - | - | - | - | - | - | - | - | 160mm |
| EK-053 | - | - | - | - | - | - | - | - | - |
| 120X200CM | - | - | - | - | - | - | - | - | 6 mm |
| 0-20 | - | - | - | - | - | - | - | - | 40 mm |
| 125 | NTN | - | - | - | - | - | - | - | - |
| Qj211m | - | - | - | - | - | - | - | - | - |
| TG0240AS030AAAA,23610AB,WF18 | Parker | - | - | - | - | - | - | - | 180 mm |
| 4X8 | - | - | - | - | - | - | - | - | 1.3125 in |
| 2.3mm/2.5mm/8mm/12mm/16mm/18mm | - | - | - | - | - | - | - | - | 20 mm |
| 1212 | - | - | - | - | - | - | - | - | 1.5000 in |
| 150W | - | - | - | - | - | - | - | - | 2mm |
| 19 | - | - | - | - | - | - | - | - | 2.0000 in |
| 45X75X19 | - | - | - | - | - | - | - | - | - |
| 1" | Parker | - | - | - | - | - | - | - | 85mm |
| 3 | - | - | - | - | - | - | - | - | - |
| 1220X2440mm | - | - | - | - | - | - | - | - | 80mm |
| 2208K | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 34317-19011 | - | - | - | - | - | - | - | - | - |
| 2017 | - | - | - | - | - | - | - | - | 1.375 Inch |
| G12X19X3B | INA | - | - | - | - | - | - | - | - |
| 09067/09195 Taper Roller Bearing | maximum shaft surface speed:4500 fpm; shaft diameter:2.5588 in; misalignment tolerance:0.020 in; width:0.7500 in; typical application:Exceptional Bearing; pressure tolerance:Ambient; D:4.7240 in; lip material:Labyrinth; Weight:0.619 lb; manufacturer catalog number:29502-5803; |
| 32215 Tapered Roller Bearings 75*130*33.25mm | Lw:9.8 mm; Mass needle roller:0.54 g; r1 max.:0.6 mm; r1,2 min.:0.2 mm; r2 max.:0.8 mm; Dw:3 mm; |
| 30302JA Bearing 15*42*14.25mm | D:42 mm; closure type:Open; standards met:ABMA; radial dynamic load capacity:2600 lb; contact angle:15 °; B:12 mm; maximum rpm:37100 RPM; radial static load capacity:1350 lb; d:20 mm; bearing material:Steel, Ceramic; |
| 32216X2 Taper Roller Bearings Factory 80*140*35.25 | closure type:Single Seal; outer ring type:Not Split; bearing material:Chrome Steel; cage material:Steel; outer ring width:53 mm; d:110 mm; B:53 mm; lubrication hole type:Lubrication Groove &; fillet radius:2 mm; finish/coating:Uncoated; |
| SET-4 Bearing 26.988x50.292x14.224mm | Weight:3.017 lbs; manufacturer upc number:717905066344; material specification:SAE 660 (C932&#; sleeve bearing type:Plain Sleeve; maximum v value:750 fp/min; maximum pv value:75000; bearing material:Cast Bronze C93200 &; d:2-3/16 in; manufacturer catalog:Click here; groove/plug type:None; |
| Manufatcuring 28KW04G/28KW01G Taper Roller Bearing For Machine | unit type:Side Mount; overall height:7.6300 in; slot spacing:6.8100 in; B:5.1800 in; lubrication type:Lubrication Fitting; end type:Open; housing material:Cast Steel; slot width:1.8100 in; seal type:Triple-lip contactin; manufacturer catalog:Click here; |
| 33114 Taper Roller Bearing 70*120*37mm | bolt center-to-center width:2-1/2 in; height to center line:7 in; frame overall length:50-1/2 in; frame material:Steel; travel:24 in; dynamic load capacity:80000 lbf; frame overall height:14-11/16 in; D:48 in; housing material:Cast Iron; locking device:Adapter Mounted; |
| H715346XX/H715311 Inch Taper Roller Bearing 76.2x136.525x46.038mm | locking device:Set Screw; housing material:Cast Iron; seal type:Contact/Lip; B:3-5/8 in; dynamic load capacity:3146 lb; overall length:96.8 mm; compatible frame number:WS300; finish/coating:Uncoated; slot spacing:3.0000 in; rod hole diameter:15.9 mm; |
Tapered roller bearing - Wikipedia
A tapered roller bearing is a unit that consists of both tapered raceways (inner and outer rings), and tapered rollers. The construction is intended for ...Description · History · Applications
Tapered Roller Bearings - Large Diameter Tapered Bearings
Tapered roller bearings are used in a variety of industrial applications. The tapered rollers allow the bearings to accommodate heavy radial, ...
Tapered Roller Bearings - NSK
Bearings of this type use conical rollers guided by a back-face rib on the cone. These bearings are capable of taking high radial loads and axial loads in ...
Tapered Roller Bearings | The Timken Company
Single-row tapered roller bearings are the most basic and widely used, consisting of a cone assembly and a cup. Timken patented the first in 1898 and today ...
Taper Roller Bearings, Inc..
Taper Roller Bearings, Inc. offers made-to-order Class 3 precision bearings. Our carefully calibrated machines certify the bearings to ABMA Class 3 ...
Tapered Roller Bearings
Results 1 - 24 of 1000+ — Online shopping for Tapered - Roller Bearings from a great selection at Industrial & Scientific Store.
Tapered Roller Bearings Engineering Data
Tapered roller bearings are bearings that can take both axial loads (sideways or thrust forces), as well as radial loads (downward force). Looking at the ...
Tapered roller bearings - features, benefits, applications ...
SKF Tapered roller bearings are ideal for supporting simultaneou radial and axial loads. They provide high reliability and long service life.
Premium Conical Tapered Roller Bearings - NTN Americas
NTN tapered roller bearings are designed for the most demanding applications in industries such as mining, forestry and steel manufacturing.
314997/VJ202 Four-row Cylindrical Roller Bearings Video