| No. | Brand | J | F | f | T | A | s | S | r |
| 6202-2RS | - | - | - | - | - | - | - | - | - |
| KC0 | - | - | - | - | - | - | - | 4.763 mm | - |
| 3232 | SKF | - | - | - | - | - | - | - | - |
| 80% | - | - | - | - | - | - | - | - | - |
| 1220x2440mm | - | - | - | - | - | - | - | - | - |
| 300W | - | - | - | - | - | - | - | - | - |
| 6305LLU | koyo | - | - | - | - | - | - | - | - |
| 3/8" | Danfoss | - | - | - | - | - | - | - | - |
| 6251-11-3200 | - | - | - | - | - | - | - | - | - |
| 505300A5110ZAAAAP, | Danfoss | - | - | - | - | - | - | - | - |
| 22310-E1-T41A | fag | - | - | - | - | - | - | - | - |
| 594A | Timken | - | - | - | - | - | - | - | - |
| 280 | - | - | - | - | - | - | - | - | - |
| 520 | - | - | - | - | - | - | - | - | - |
| 23217 | - | - | - | - | - | - | - | - | - |
| Ve9 | - | - | - | - | - | - | - | - | - |
| 5207ffh | Bower | - | - | - | - | - | - | - | - |
| 6212LLB/2A, | NTN | - | - | - | - | - | - | - | - |
| A2F10.12.23.28.45.55W3P1 | - | - | - | - | - | - | - | - | - |
| 62207-2RS | SKF | - | - | - | - | - | - | - | - |
| AH211 Withdrawal Sleeve 50x55x29mm | Availability:In Stock; Weight:0.02 KGS; D:52mm; Cage Type:Steel; Static Load Rating (kN):7.9; Limiting Speed Rating (r/min):14000; Clearance:Standard; SKU:6304zznr-nsk; B:15mm; d:20mm; |
| 90790 / CR90790 Stainless Speedi Sleeve For Shaft Repair | d1:102 mm; h:3.5 mm; Mass lock nut:0.41 kg; d3:110 mm; Axial static load carrying capacity:190 kN; Associated spanner:HN 17; b:8 mm; Lock washer / Locking clip:MB 17; B:16 mm; G:M 85x2; |
| AH24056G Withdrawal Sleeve Supplier | Fillet Radius ra:2.00 mm; Sealed Speed Rating n3:3400 rpm; Oil Speed Rating Open/Shielded n2:6000 rpm; Basic Static Radial Load Rating Co:62000 N; Grease Speed Rating Open/Shielded n1:5000 rpm; D:140.0000 mm; Basic Dynamic Radial Load Rating C:99500 N; Accessories:Two Seals; B:33.00 mm; d:55.000 mm; |
| MSR55x2 Precision Locknut / MSR-M55x2 Locking Nut (M55x2)x75x25mm | Clearance:C3; Limiting Speed Rating (r/min):16000; Cage Type:Steel; B:17mm; SKU:6305/c3-skf; Condition:New; Reference Speed Rating (r/min):24000; Seals or Shields:Open Type; Fatigue Load Rating (kN):0.49; Availability:In Stock; |
| ZM35 Precision Locknut (M35x1.5)x52x12mm | Grease Limiting Speed (r/min):6000; SKU:22208eae4-nsk; d:40mm; Availability:In Stock; B:23mm; Cage Type:Steel; Oil Limiting Speed (r/min):7500; D:80mm; Dynamic Load Rating (kN):90.5; Weight:0.50 KGS; |
| TMDT 2-36 Pipe Clamp Probe | Weight:0.02 KGS; SKU:6308/c3-skf; Condition:New; Cage Type:Steel; B:23mm; Dynamic Load Rating (kN):42.3; Static Load Rating (kN):24; Clearance:C3; Availability:In Stock; Seals or Shields:Open Type; |
| CP2744 Thrust Plate 27x43.7x0.8mm | Cage Type:Plastic; d:40mm; SKU:7008ctrsulp3-nsk; Oil Limiting Speed (r/min):32500; B:15mm; Dynamic Load Rating (kN):20.6; Static Load Rating (kN):15.9; Grease Limiting Speed (r/min):21300; Weight:0.02 KGS; D:68mm; |
| CP917 Thrust Plate 9x16.4x0.8mm | Cage Type:Steel; Seals or Shields:Open Type; D:52mm; Availability:In Stock; d:25mm; SKU:2205kjc3-qbl; Clearance:C3; Weight:0.02 KGS; B:18mm; |
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
HMV142E / HMV 142E Hydraulic Nut 712x870x93mm Video