| No. | Brand | J | F | f | T | A | s | S | r |
| 17013 | INA | - | - | - | - | - | - | - | - |
| 48 | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| PC800-8 | - | - | - | - | - | - | - | - | - |
| 481416 | Parker | - | - | - | - | - | - | - | - |
| YF0-81530-62-03 | - | - | - | - | 279.4 mm | - | - | - | - |
| 22224-E1A-M | fag | - | - | - | - | - | - | - | - |
| T396ZX | - | - | - | - | - | - | - | - | - |
| 1220*2440*18mm | - | - | - | - | - | - | - | - | - |
| 24026 | NSK | - | - | - | - | - | - | - | - |
| PC120-5 | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 22230V | - | - | - | - | - | - | - | - | - |
| 19360 | - | - | - | - | - | - | - | - | - |
| 6210 | FAFNIR | - | - | - | - | - | - | - | - |
| 6805BNLS | Nachi | - | 35 mm | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| Ye2 | - | - | - | - | - | - | - | - | - |
| X90 | - | - | - | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| L-4044 | - | - | - | - | - | - | - | - | - |
| 9W | - | - | - | - | - | - | - | - | - |
| H309X Adapter Sleeve 40x65x39mm | Dynamic Load Rating (kN):11600; B:15.9mm; SKU:3202btnc3-nsk; Weight:0.02 KGS; Cage Type:Plastic; Static Load Rating (kN):6800; Seals or Shields:Open Type; D:35mm; Oil Limiting Speed (r/min):18000; Grease Limiting Speed (r/min):13000; |
| AH24038 Withdrawal Sleeve(matched Bearing:24038CCK,24038CAK, 24038CCK30/W33, C4038K30V | SKU:1201etn9-qbl; Seals or Shields:Open Type; B:10mm; D:32mm; Clearance:Standard; d:12mm; Cage Type:Plastic; Weight:0.02 KGS; Availability:In Stock; |
| AOH3064G(23064CCK, 23064CAK, 23064CCK/W33, C3064KM Bearing Withdrawal Sleeve) | Fatigue Load Rating (kN):--; Availability:In Stock; B:8mm; Limiting Speed Rating (r/min):30000; Static Load Rating (kN):1.97; Dynamic Load Rating (kN):4.55; Seals or Shields:Two Metal Shields; d:10mm; Reference Speed Rating (r/min):--; Weight:0.02 KGS; |
| Plummer Block Housings SNV180-F-L + 22317-K + H2317X300 + TCV617X300 | B:22mm; D:110mm; Availability:In Stock; Weight:0.02 KGS; Clearance:C3; Seals or Shields:Two Rubber Seals; Cage Type:Steel; d:60mm; SKU:6212-2rs/c3-qbl; |
| H307X Adapter Sleeve 30x52x35mm | das:802 mm; Calculation factor kr:0.1; Reference speed:240 r/min; Calculation factor e:0.2; Fatigue load limit Pu:315 kN; E:880 mm; Mass bearing:105 kg; ra max.:4 mm; Da max.:902 mm; da min.:768 mm; |
| AH3038G Withdrawal Sleeve(matched Bearing:23038CCK,23038CAK,23038CCK/W33, C3038K) | Limiting Speed Rating (r/min):5600; Weight:0.28 KGS; D:80mm; B:16mm; Availability:In Stock; Fatigue Load Rating (kN):0.77; d:50mm; Cage Type:Steel; SKU:6010-rsr-c3-fag; Clearance:C3; |
| 99726 / CR99726 Stainless Speedi Sleeve For Shaft Repair | d:320mm; Weight:77.40 KGS; SKU:23064embw507c08c4-ti; B:121mm; Cage Type:Brass; D:480mm; Seals or Shields:Open Type; Dynamic Load Rating (kN):2410; Static Load Rating (kN):3880; Limiting Speed Rating (r/min):880; |
| 65 mm x 120 mm x 31 mm ZM15 Precision Locknut (M15x1)x25x8mm | Mass rod end:0.34 kg; B:16 mm; l4 max.:106 mm; d:20 mm; G:M 20x1.5; C1 max.:13.5 mm; r1 min.:0.3 mm; d4 ≈:28 mm; Specific dynamic load factor K:100 N/mm²; Basic dynamic load rating C:30 kN; Size (mm):65 mm x 120 mm x 31 mm ; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
HMV120E / HMV 120E Hydraulic Nut 602x748x86mm Video