| No. | Brand | J | F | f | T | A | s | S | r |
| TRA5118 | - | - | - | - | - | - | - | - | - |
| 6HK1 | - | - | - | - | - | - | - | - | - |
| 2016 | - | - | 125 mm | - | - | - | - | - | - |
| 1040T | Rexnord | - | - | - | - | - | - | - | - |
| 309KZZ-2 | FAFNIR | - | - | - | - | - | - | - | - |
| 99002 | - | - | - | - | - | - | - | - | - |
| 5/10/20pcs | - | - | - | - | - | - | - | - | - |
| (VT215) | - | - | - | - | - | - | - | - | - |
| 2F | - | - | - | - | - | - | - | - | - |
| 3 | YUKEN | - | - | - | - | - | - | - | - |
| NNCL-4914V | - | - | - | - | - | - | - | - | - |
| GSX400 | - | - | - | - | - | - | - | - | - |
| 4BDS1 | - | - | - | - | - | - | - | - | - |
| 57207 | Nachi | - | - | - | - | - | - | - | - |
| 96LED | - | - | - | - | - | - | - | - | - |
| 5016 | - | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| 6.5kg | - | - | - | - | - | - | - | - | - |
| 880TAB | - | - | - | - | - | - | - | - | - |
| NA4908 | - | - | - | - | - | - | - | - | - |
| 3d | - | - | - | - | - | - | - | - | - |
| 60W | - | - | - | - | - | - | - | - | - |
| SK235 | - | - | - | - | - | - | - | - | - |
| 18X1220X2440mm | - | - | - | - | - | - | - | 4.763 mm | - |
| (21% | - | - | - | - | - | - | - | - | - |
| A302R | INA | - | - | - | - | - | - | - | - |
| 480W | - | - | - | - | - | - | - | - | - |
| CAS12125-02-9 | - | - | - | - | - | - | - | - | - |
| AH24036 Withdrawal Sleeve(matched Bearing:24036CCK,24036CAK , C4036K ) | d1:57.1 mm; Calculation factor e:0.68; db min.:53.2 mm; r1,2 min.:0.6 mm; Calculation factor (single, tandem) Y2:0.87; B:12 mm; d:50 mm; Calculation factor fHC:1; Calculation factor f2B:1.04; Calculation factor (back-to-back, face-to-face) Y1:0.92; |
| TMDT 2-34/1.5 Gas And Liquid Probe | Static Load Rating (kN):129.9; Clearance:Standard; D:160mm; Speed Rating (r/min):8900; Weight:2.20 KGS; B:30mm; Cage Type:Plastic; Dynamic Load Rating (kN):97.9; Availability:In Stock; Seals or Shields:Open Type; |
| CP7160200 Thrust Plate 160x198.7x7mm | d:41.275 mm; T:34.925 mm; Reference speed:5600 r/min; Calculation factor e:0.28; Fatigue load limit Pu:21.6 kN; d1 ≈:72.9 mm; rb max.:3.3 mm; db min.:54.5 mm; Limiting speed:6700 r/min; Mass bearing:1.47 kg; |
| AOHX30/500G (230/500CAK/W33, C30/500KM, 230/500CCK, 230/500CAK Bearing Withdrawal Sleeve) | Availability:In Stock; SKU:3212b-2rstn-qbl; Seals or Shields:Two Rubber Seals; d:60mm; B:36.5mm; Cage Type:Plastic; D:110mm; Clearance:Standard; Weight:0.02 KGS; |
| TRB411 Thrust Bearing Ring / Thrust Needle Bearing Washer 6.35x17.45x1.6mm | B:17mm; Cage Type:Plastic; SKU:7207-b-tvp-fag; Reference Speed Rating (r/min):12000; Dynamic Load Rating (kN):27; Static Load Rating (kN):18.3; Fatigue Load Rating (kN):1.3; Seals or Shields:Open Type; Clearance:Standard; D:72mm; |
| 99365 / CR99365 Stainless Speedi Sleeve For Shaft Repair | H:169.863 mm; Bearing limiting speed:4500 r/min; ba:30.163 mm; J max.:279.4 mm; Lock nut:AN 16; h:49.212 mm; A2:126.603 mm; R1:53.181 mm; Pa:20.5 kN; Appropriate attachment bolt size G:0.75 in; |
| TRC3650 Thrust Bearing Ring / Thrust Needle Bearing Washer 57.15x79.375x2.4mm | D:90mm; Availability:In Stock; Weight:0.02 KGS; Fatigue Load Rating (kN):--; Static Load Rating (kN):24; Limiting Speed Rating (r/min):7500; SKU:6308c3-nsk; B:23mm; Reference Speed Rating (r/min):--; Dynamic Load Rating (kN):40.5; |
| 87569 / CR87569 Stainless Speedi Sleeve For Shaft Repair | D:340mm; B:114mm; Cage Type:Brass; Weight:0.02 KGS; Seals or Shields:Open Type; Clearance:C4; Availability:In Stock; SKU:22332-mb-c4-qbl; d:160mm; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
HMV116E / HMV 116E Hydraulic Nut 582x726x85mm Video