| No. | Brand | J | F | f | T | A | s | S | r |
| 1220x2440mm | - | - | - | - | - | - | - | - | - |
| 280 | - | - | - | - | - | - | - | - | - |
| TWN-24-OPN | Thomson | - | - | - | - | - | - | - | - |
| 6900 | - | - | - | - | - | - | - | - | - |
| GS1268 | - | - | - | - | - | - | - | - | - |
| 1214K | fag | - | - | - | - | - | - | - | - |
| PS411155ACP | Parker | - | - | - | - | - | - | - | - |
| CAS12125-02-9 | - | - | - | - | - | - | - | - | - |
| 60122NSEC3 | Nachi | - | - | - | - | - | - | - | - |
| 3800 | - | - | - | - | - | - | - | - | - |
| 865 | - | - | - | - | - | - | - | - | - |
| 100lm | INA | - | - | - | - | - | - | - | - |
| 28mm | - | - | - | - | - | - | - | - | - |
| JBU733 | TRW | - | - | - | - | - | - | - | - |
| 609 | - | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| SK50 | - | - | - | - | - | - | - | - | - |
| NUP2216 | NSK | - | - | - | - | - | - | - | - |
| UG223HL | Link-Belt | - | - | - | - | - | - | - | - |
| KMX15RA | INA | - | - | - | - | - | - | - | - |
| 9e-1b40-0876-1105 | - | - | - | - | - | - | - | - | - |
| OMR125 | - | - | - | - | - | - | - | - | - |
| 99435 / CR99435 Stainless Speedi Sleeve For Shaft Repair | Basic static load rating C0:0.057 kN; Calculation factor f0:7.1; Da max.:6.8 mm; da max.:3.8 mm; r1,2 min.:0.15 mm; ra max.:0.15 mm; Limiting speed:80000 r/min; da min.:3.7 mm; Basic dynamic load rating C:0.178 kN; B:2.8 mm; |
| TRE3648 Thrust Bearing Ring / Thrust Needle Bearing Washer 57.15x76.2x4mm | d:406.445 mm; r1,2 min.:6.4 mm; Fatigue load limit Pu:1180 kN; D1 ≈:541 mm; Calculation factor Y0:2; B:409.575 mm; Basic dynamic load rating C:6050 kN; Thrust factor K:1.76; Comparative axial load rating CFa:264 kN; Mass bearing:304 kg; |
| TKES 10F Endoscope | D:58mm; Seals or Shields:Two Rubber Seals; SKU:6809dd-nsk; d:45mm; Grease Limiting Speed (r/min):11000; Availability:In Stock; Oil Limiting Speed (r/min):13000; Dynamic Load Rating (kN):6.6; B:7mm; Cage Type:Steel; |
| AOH24164(24164CAK, 24164CCK, 24164CAK30/W33, 24164CCK30/W33 Bearing Withdrawal Sleeve) | End plug (suffix Y):EPR 21; h:47.625 mm; A1:158.75 mm; PosiTrac Plus contact element:2 x B10724-155; N1:28.575 mm; Pa:40 kN; P120°:85.9 kN; L:558.8 mm; ba:69.85 mm; J max.:488.95 mm; |
| MSR22x1.5 Precision Locknut / MSR-M22x1.5 Locking Nut (M22x1.5)x40x18mm | Weight:0.02 KGS; B:23mm; D:72mm; Cage Type:Steel; SKU:22207-e1-k-qbl; d:35mm; Seals or Shields:Open Type; Availability:In Stock; Clearance:Standard; |
| TRC1423 Thrust Bearing Ring / Thrust Needle Bearing Washer 22.225x36.5x2.4mm | R1:104.775 mm; H:338.137 mm; ba:69.85 mm; R2:33.337 mm; Taconite seal:TER 155; Mass pillow block:132 kg; Initial grease fill:793.8 g; End plug (suffix Y):EPR 21; P150°:120 kN; Housing:SSAFS 038 KA; |
| AOH3284G (23284CAK/W33, 23284CAK, 23284CCK Bearing Withdrawal Sleeve) | Static Load Rating (kN):7.35; D:80mm; Weight:0.02 KGS; Dynamic Load Rating (kN):22.4; SKU:2208k-2rstn-nsk; Clearance:Standard; B:23mm; Cage Type:Plastic; Availability:In Stock; Oil Limiting Speed (r/min):9000; |
| 90130 / CR90130 Stainless Speedi Sleeve For Shaft Repair | H2:155 mm; P120°:4000 kN; H1:460 mm; L:1330 mm; Ca:290 mm; P150°:3500 kN; da:440 mm; Locating ring:2 x FRB 5/790; N:70 mm; ATS:480 mm; |
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
HMV112E / HMV 112E Hydraulic Nut 562x704x84mm Video