| No. | Brand | J | F | f | T | A | s | S | r |
| 7217ACDGB/P4A | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 3m | - | - | - | - | - | - | - | - | - |
| 1000 | NTN | - | - | - | - | - | - | - | - |
| N309ECP/C3 | SKF | - | - | - | - | - | - | - | - |
| NJ407-M1 | - | - | - | - | - | - | - | - | - |
| 20W | - | - | - | - | - | - | - | - | - |
| 315 | - | - | - | - | - | - | - | - | - |
| F12 | - | - | - | - | - | - | - | - | - |
| PV24 | - | - | - | - | - | - | - | - | - |
| 50W/100W/150W/200W | - | - | - | - | - | - | - | - | - |
| E0/E1/MDF | INA | - | - | - | - | - | - | - | - |
| 6412 | - | - | - | - | - | - | - | - | - |
| G5-20-1FE13F-L | Parker | - | - | - | - | - | - | - | - |
| 25%Min | - | - | - | - | - | - | - | - | - |
| 800 | NTN | - | - | - | - | - | - | - | - |
| 360 | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 5m | - | - | - | - | - | - | - | - | - |
| PC60 | - | - | - | - | - | - | - | - | - |
| 6063 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 150kg | - | - | - | - | - | - | - | - | - |
| T396ZX | - | - | - | - | - | - | - | - | - |
| 23217 | - | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| L650xw440xh345mm | - | - | - | - | - | - | - | - | - |
| AOHX241/600 (241/600CAK, 241/600CCK, 241/600ECAK30/W33 Bearing Withdrawal Sleeve) | Static Load Rating (kN):66; Availability:In Stock; d:105mm; D:160mm; B:26mm; Weight:1.58 KGS; Cage Type:Steel; Dynamic Load Rating (kN):72.5; Seals or Shields:Two Rubber Seals; Clearance:C3; |
| 86175 / CR86175 Stainless Speedi Sleeve For Shaft Repair | B:38.1 mm; Recommended tightening torque for grub screw:4 N·m; Housing material:Composite for food a; Thread grub screw G2:1/4-28 UNF; Hexagonal key size for grub screw N:3.175 mm; Housing:FYAWK 506 L; L:83 mm; Mass bearing unit:0.48 kg; J1:31.8 mm; J:47.6 mm; |
| TRB411 Thrust Bearing Ring / Thrust Needle Bearing Washer 6.35x17.45x1.6mm | B:17mm; Cage Type:Plastic; SKU:7207-b-tvp-fag; Reference Speed Rating (r/min):12000; Dynamic Load Rating (kN):27; Static Load Rating (kN):18.3; Fatigue Load Rating (kN):1.3; Seals or Shields:Open Type; Clearance:Standard; D:72mm; |
| AH3126 Withdrawal Sleeve 125x130x78mm | Reference Speed Rating (r/min):7200; d:70mm; Dynamic Load Rating (kN):26.8; Clearance:C3; Availability:In Stock; Cage Type:Steel; B:13mm; D:110mm; SKU:16014 c3-timken; Limiting Speed Rating (r/min):5000; |
| 30 mm x 62 mm x 16 mm H315X Adapter Sleeve 65x98x55mm | Reference Speed Rating (r/min):56000; Seals or Shields:Open Type; Availability:In Stock; D:30mm; Cage Type:Plastic; B:9mm; Clearance:Standard; d:10mm; Static Load Rating (kN):1.18; Weight:0.03 KGS; Size (mm):30 mm x 62 mm x 16 mm ; |
| 90347 / CR90347 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; Dynamic Load Rating (kN):117; D:190mm; d:90mm; Seals or Shields:Open Type; SKU:1318k-skf; Limiting Speed Rating (r/min):4500; Weight:0.02 KGS; Cage Type:Steel; B:43mm; |
| AOH3176G(23176CAK, 23176CCK, 23176CAK/W33, C3176KMB Bearing Withdrawal Sleeve) | D:580 mm; da min.:560 mm; D1 ≈:532 mm; d1 ≈:578 mm; Basic static load rating C0:1600 kN; d:530 mm; ra max.:1 mm; Mass bearing (including seat washer where applicable):11 kg; H:38 mm; Basic dynamic load rating C:203 kN; |
| AH3030 Withdrawal Sleeve 145x150x72mm | Oil Speed Rating Open/Shielded n2:5000 rpm; Grease Speed Rating Open/Shielded n1:4300 rpm; Basic Dynamic Radial Load Rating C:114000 N; D:160.0000 mm; Accessories:Snap-Ring; Grease Speed Rating n1:4300 rpm; Oil Speed Rating n2:5000 rpm; Basic Static Radial Load Rating Co:76500 N; B:37.00 mm; d:75.000 mm; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
HMV84E / HMV 84E Hydraulic Nut 422x546x72mm Video