| No. | Brand | J | F | f | T | A | s | S | r |
| 150W | - | - | - | - | - | - | - | - | - |
| HPIB070 | - | - | - | - | - | - | - | - | - |
| 600X600 | - | - | - | - | - | - | - | - | - |
| Qj315n2MPa | - | - | - | - | - | - | - | - | - |
| 6002ZZE | Nachi | - | - | - | - | - | - | - | - |
| 5016 | - | - | - | - | - | - | - | - | - |
| 1000mm | - | - | - | - | - | - | - | - | - |
| 50W | - | - | - | - | - | - | - | - | - |
| 16-0-1 | - | - | - | - | - | - | - | - | - |
| 7411AM, | SKF | - | - | - | - | - | - | - | - |
| 1995-1998 | Dodge | - | - | - | - | - | - | - | - |
| PC120-3 | - | - | - | - | - | - | - | - | - |
| 315 | - | - | - | - | - | - | - | - | - |
| 6745-11-3102 | - | - | - | - | - | - | - | - | - |
| 2019 | Danfoss | - | - | - | - | - | - | - | - |
| MB5209XP | - | - | - | - | - | - | - | - | - |
| SL02 | - | - | - | - | - | - | - | - | - |
| 121341J | DAIKIN | - | - | - | - | - | - | - | - |
| (80W | - | - | - | - | - | - | - | - | - |
| 09263-16001-000 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| SK135SR | - | - | - | - | - | - | - | - | - |
| 3000277001 | - | - | - | - | - | - | - | - | - |
| 32006J | koyo | - | - | - | - | - | - | - | - |
| 026-67063-0 | Parker | - | - | - | - | - | - | - | - |
| 801234-AAA-NR | Parker | - | - | - | - | - | - | - | - |
| 96-90421-2 | - | - | - | - | - | - | - | - | - |
| SQP41-50-2/3/4/5/6/7/8/9/10/11/12/14 | TOKYO | - | - | - | - | - | - | - | - |
| MSR55x1.5 Precision Locknut / MSR-M55x1.5 Locking Nut (M55x1.5)x75x25mm | r3,4 min.:2 mm; db min.:102.5 mm; da max.:101 mm; Basic dynamic load rating C:415 kN; Limiting speed:4000 r/min; Basic static load rating C0:520 kN; B:55 mm; Da min.:135 mm; Cb min.:13 mm; r1,2 min.:2.5 mm; |
| 99315 / CR99315 Stainless Speedi Sleeve For Shaft Repair | Static Load Rating (kN):2.85; SKU:6002-2rsh/c3gjn-skf; Weight:0.02 KGS; Cage Type:Steel; Limiting Speed Rating (r/min):15000; D:32mm; Seals or Shields:Two Rubber Seals; Condition:New; B:9mm; Clearance:C3; |
| CR99111 Stainless Steel Speedi Sleeve For Shaft Repair | Seals or Shields:Two Metal Shields; SKU:6024zzc3-nsk; Oil Limiting Speed (r/min):4300; D:180mm; d:120mm; Grease Limiting Speed (r/min):3600; Dynamic Load Rating (kN):88; B:28mm; Clearance:C3; Cage Type:Steel; |
| AOH24180(24180ECCK30/W33, 24180CCK, 24180CAK Bearing Withdrawal Sleeve) | Clearance:Standard; Weight:0.20 KGS; D:3.313 inch; d:2 inch; B:0.625 inch; Seals or Shields:Open Type; SKU:xlj2-r&m; Availability:In Stock; |
| AH24128 Withdrawal Sleeve(matched Bearing:24128CCK30/W33, C4128K30V) | Cage Type:Plastic; d:20mm; Speed Rating (r/min):58680; B:12mm; D:42mm; Dynamic Load Rating (kN):3.33; Weight:0.06 KGS; SKU:2mmvc9104hxcrdul-tim; Availability:In Stock; Seals or Shields:Open Type; |
| TRD4860 Thrust Bearing Ring / Thrust Needle Bearing Washer 76.2x95.25x3.2mm | Speed Rating (r/min):30900; Cage Type:Plastic; D:47mm; Clearance:Standard; Availability:In Stock; d:25mm; Dynamic Load Rating (kN):7.4; Static Load Rating (kN):12.9; Weight:0.08 KGS; Seals or Shields:Open Type; |
| CR99141 Stainless Steel Speedi Sleeve For Shaft Repair | d:15mm; Clearance:Standard; D:35mm; Dynamic Load Rating (kN):13.7; Static Load Rating (kN):10.4; Cage Type:Plastic; B:11mm; Speed Rating (r/min):6400; Weight:0.05 KGS; Seals or Shields:Open Type; |
| TIH MC Multi-core Induction Heater | Seals or Shields:Open Type; Weight:0.02 KGS; B:23mm; Cage Type:Plastic; SKU:7213a5trdulp3-nsk; Preload:Light; Availability:In Stock; d:65mm; D:120mm; Dynamic Load Rating (kN):69.5; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
HMV72E / HMV 72E Hydraulic Nut 362x472x66mm Video