| No. | Brand | J | F | f | T | A | s | S | r |
| RA014RRB | Timken | - | - | - | - | - | - | 4.763 mm | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| 650 | fag | - | - | - | - | - | - | - | - |
| 20.5% | - | - | - | - | - | - | - | - | - |
| GS1268 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| CY14-1B | INA | - | - | - | - | - | - | - | - |
| 6mm | INA | - | - | - | - | - | - | - | - |
| LiFePO4 | - | - | - | - | - | - | - | - | - |
| 6030 | NSK | - | - | - | - | - | - | - | - |
| R901008343 | Rexroth | - | - | - | - | - | - | - | - |
| 7007CSN24TRV1VS-01 | NSK | - | - | - | - | - | - | - | - |
| N39611 | - | - | - | - | - | - | - | - | - |
| 31Q9-40020 | - | - | - | - | - | - | - | - | - |
| XA81420 | Thomson | - | - | - | - | - | - | - | - |
| 8x14x4mm | - | - | - | - | - | - | - | - | - |
| Covas-F250c | - | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| 1996-2000 | Timken | - | - | - | - | - | - | - | - |
| 7014CD/P4A | SKF | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 36W | INA | - | - | - | - | - | - | - | - |
| 316ss | - | - | - | - | - | - | - | - | - |
| IP66 | - | - | - | - | - | - | - | - | - |
| TCR2 | - | - | - | - | - | - | - | - | - |
| 99313 / CR99313 Stainless Speedi Sleeve For Shaft Repair | l7 min.:55 mm; d2 max.:104 mm; l5 ≈:30 mm; w:55 mm; h1:145 mm; Basic static load rating C0:224 kN; r1 min.:0.6 mm; dk:60 mm; α:7 °; Specific dynamic load factor K:100 N/mm²; |
| AOH31/950 (231/950CAK/W33, 231/950CAK, 231/950CCK, 231/950CCK/W33 Bearing Withdrawal Sleeve) | Accessories:Chain Sheave Type- 3; Basic Interchange NSK:-; Basic Interchange SPLIT:-; Basic Interchange BCA:-; Basic Interchange NDH:-; Basic Interchange MCGILL:-; Basic Interchange:-; Basic Radial Load Rating-Dynamic DC:19600 lbf; Basic Radial Load Rating-Static SCO:77600 lbf; |
| CP21022 Thrust Plate 10x21.5x2mm | r1,2 min.:6 mm; Fatigue load limit Pu:930 kN; Basic dynamic load rating C:7072 kN; Basic static load rating C0:15600 kN; Reference speed:260 r/min; da min.:873 mm; Calculation factor e:0.16; Calculation factor Y2:6.3; d:850 mm; Mass bearing:560 kg; |
| 86907 / CR86907 Stainless Speedi Sleeve For Shaft Repair | B:23mm; Cage Type:Plastic; Availability:In Stock; Weight:0.02 KGS; Clearance:Standard; D:90mm; Dynamic Load Rating (kN):114; Seals or Shields:Open Type; Static Load Rating (kN):114; Fatigue Load Rating (kN):14.3; |
| 81826 / CR81826 Stainless Speedi Sleeve For Shaft Repair | SKU:2mm9332wicrsux-timke; Clearance:Standard; Cage Type:Plastic; Weight:2.75 KGS; d:160mm; Seals or Shields:Open Type; B:28mm; Speed Rating (r/min):5800; D:220mm; Static Load Rating (kN):128.9; |
| TKED 1 Electrical Discharge Detector Pen | Preload:Light; Availability:In Stock; Seals or Shields:Open Type; D:200mm; Dynamic Load Rating (kN):140; Fatigue Load Rating (kN):4.9; Clearance:Standard; Cage Type:Plastic; SKU:7026acd/p4atbta-skf; Oil Limiting Speed (r/min):9000; |
| TRC1427 Thrust Bearing Ring / Thrust Needle Bearing Washer 22.225x42.85x2.4mm | Calculation factor e:0.33; Basic static load rating C0:1120 kN; ra max.:2.5 mm; Mass bearing + sleeve:21 kg; D:240 mm; K:7.5 mm; db min.:121 mm; Calculation factor Y1:2; Calculation factor Y0:2; d2 ≈:143 mm; |
| AHX322 Withdrawal Sleeve(matched Bearing:1322K) | Cage Type:Steel; B:11mm; SKU:630/8-2rs-zen; Clearance:Standard; Weight:0.20 KGS; d:8mm; Availability:In Stock; Seals or Shields:Two Rubber Seals; D:22mm; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
HMV58E / HMV 58E Hydraulic Nut 292x390x58mm Video