| No. | Brand | J | F | f | T | A | s | S | r |
| 21' | - | - | - | - | - | - | - | - | - |
| 5pcs | - | - | - | - | - | - | - | - | - |
| 120 | - | - | - | - | - | - | - | - | - |
| 6003 | - | - | - | - | - | - | - | - | - |
| 6309ZZ | NTN | - | - | - | - | - | - | - | - |
| 400W | - | - | - | - | - | - | - | - | - |
| 110A-036-AS-0, | Parker | - | - | - | - | - | - | - | - |
| 2X(607Z | - | - | - | - | - | - | - | - | - |
| 20W/30W/50W | - | - | - | - | - | - | - | - | - |
| 23030 | NSK | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| NUTR203/3AS | NTN | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| BH-1614 | koyo | - | - | - | - | - | - | - | - |
| N211W | NSK | - | - | - | - | - | - | - | - |
| IP20/IP44/IP67 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| G9 | - | - | - | - | - | - | - | - | - |
| CAS12125-02-9 | - | - | - | - | - | - | - | - | - |
| NU2315-E-XL-M1A-C3 | fag | - | - | - | - | - | - | - | - |
| 1.5-3mm | - | - | - | - | - | - | - | - | - |
| 32MCY14-1D/T | - | - | - | - | - | - | - | - | - |
| CL2B-DA01B | - | - | - | - | - | - | - | - | - |
| TCR2 | - | - | - | - | - | - | - | - | - |
| SL183030-C3 | INA | - | - | - | - | - | - | - | - |
| 38, | Parker | - | - | - | - | - | - | - | - |
| AHX318 Withdrawal Sleeve (matched Bearing:2218K, 1318K, 22218EK,21318CCK, C2218K, C2218KV) | d:65mm; D:120mm; SKU:3213b-2rstn-qbl; Clearance:Standard; B:38.1mm; Cage Type:Plastic; Seals or Shields:Two Rubber Seals; Weight:0.02 KGS; Availability:In Stock; |
| AHX2316 Withdrawal Sleeve(matched Bearing:2316K, 22316EK, C2316K) | Dynamic Load Rating (kN):14.6; Static Load Rating (kN):9; Seals or Shields:Open Type; Clearance:Standard; Weight:0.09 KGS; Cage Type:Plastic; Availability:In Stock; Reference Speed Rating (r/min):15500; d:17mm; B:17.5mm; |
| TRC411 Thrust Bearing Ring / Thrust Needle Bearing Washer 6.35x17.45x2.4mm | l7 min.:88 mm; Mass rod end:15 kg; G:M 80; dk:105 mm; d:80 mm; α:6 °; B:55 mm; Basic static load rating C0:655 kN; Specific dynamic load factor K:100 N/mm²; C1 max.:48 mm; |
| AOH24148(24148CCK30/W33, 24148CAK30/W33 Bearing Sleeve) | C:880 mm; d:1300 mm; b:22.3 mm; F:1391 mm; D1 ≈:1551.7 mm; r3,4 min.:7.5 mm; B:890 mm; Basic static load rating C0:122000 kN; Calculation factor kr:550; Design variant/feature:BC4.19/W33WI; |
| AHX3040 Withdrawal Sleeve 190x200x102mm | Static Load Rating (kN):6.5; Cage Type:Steel; B:18mm; SKU:1208j-nsk; d:40mm; Seals or Shields:Open Type; Dynamic Load Rating (kN):19.3; Oil Limiting Speed (r/min):9000; Availability:In Stock; Weight:0.02 KGS; |
| VHIS 35 Bearing Induction Heater | Availability:In Stock; Weight:1.20 KGS; Oil Limiting Speed (r/min):8000; Seals or Shields:Open Type; Fatigue Load Rating (kN):12.9; B:24mm; SKU:n1018ktn9/sp-skf; Clearance:Standard; Dynamic Load Rating (kN):79.2; Grease Limiting Speed (r/min):7000; |
| CPR81215 Thrust Plate 75x110x8mm | Grease Limiting Speed (r/min):25000; Dynamic Load Rating (kN):23; Clearance:Standard; D:62mm; Static Load Rating (kN):14.7; Preload:Medium; Availability:In Stock; SKU:7206ctrsump3-nsk; Seals or Shields:Open Type; B:16mm; |
| 87513 / CR87513 Stainless Speedi Sleeve For Shaft Repair | Cage Type:Steel; d:8mm; Availability:In Stock; Seals or Shields:Two Metal Shields; Weight:0.20 KGS; Clearance:Standard; B:3.5mm; SKU:smf128-2z-zen; D:12mm; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
HMV54E / HMV 54E Hydraulic Nut 272x368x57mm Video