| No. | Brand | J | F | f | T | A | s | S | r |
| (DM-9600) | - | - | - | - | - | - | - | - | - |
| RCTS33SA3 | koyo | - | - | - | - | - | - | - | - |
| 300W | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| GG-4 | - | - | - | - | - | - | - | - | - |
| 6805BNLS | Nachi | - | 35 mm | - | - | - | - | - | - |
| PC120-5 | - | - | - | - | - | - | - | - | - |
| PV092L1K1T1N001 | Parker | - | - | - | - | - | - | - | - |
| Hm705 | - | - | - | - | - | - | - | - | - |
| 6308 | INA | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| r155.88 | - | - | - | - | - | - | - | - | - |
| F1 | - | - | - | - | - | - | - | - | - |
| G9 | - | - | - | - | - | - | - | - | - |
| ST4276A | koyo | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| SL183030-C3 | INA | - | - | - | - | - | - | - | - |
| 4T-LM48548 | Bower | - | - | - | - | - | - | - | - |
| 50% | - | - | - | - | - | - | - | - | - |
| 48 | - | - | - | - | - | - | - | - | - |
| 14 | - | - | - | - | - | - | - | - | - |
| 1100X1100 | - | - | - | - | - | - | - | - | - |
| 4X8FT | - | - | - | - | - | - | - | - | - |
| 30% | - | - | - | - | - | 114.3 mm | - | - | - |
| 1220X2440mm | - | - | - | - | - | - | - | - | - |
| 90801 / CR90801 Stainless Speedi Sleeve For Shaft Repair | SKU:s697-2z-zen; Weight:0.20 KGS; Seals or Shields:Two Metal Shields; d:7mm; Availability:In Stock; Cage Type:Steel; D:17mm; B:5mm; Clearance:Standard; |
| 85914 / CR85914 Stainless Speedi Sleeve For Shaft Repair | Basic static load rating C0:14300 kN; Limiting speed:800 r/min; r3,4 min.:7.5 mm; da max.:545 mm; Basic dynamic load rating C:7040 kN; K:12 mm; b:22.3 mm; Da max.:757 mm; D1 ≈:701 mm; s max.:12 mm; |
| HMV10E / HMV 10E Hydraulic Nut (M50x1.5)*114*42mm | Design variant/feature:NNU/W33; Mass bearing:12300 kg; rb max.:8 mm; Limiting speed:150 r/min; r1,2 min.:19 mm; Basic static load rating C0:132000 kN; K:12 mm; Da max.:2260 mm; Fatigue load limit Pu:7100 kN; F:1709 mm; |
| AHX3030 Withdrawal Sleeve(matched Bearing:23030CCK/W33, C3030KMB) | Dynamic Load Rating (kN):38.5; Cage Type:Plastic; SKU:1309ktnc3-nsk; d:45mm; Grease Limiting Speed (r/min):6000; D:100mm; Static Load Rating (kN):12.7; Availability:In Stock; Clearance:C3; B:25mm; |
| 99356 / CR99356 Stainless Speedi Sleeve For Shaft Repair | Cage Type:Steel; Limiting Speed Rating (r/min):3200; Availability:In Stock; d:130mm; Fatigue Load Rating (kN):78; SKU:23126cck/c4w33-skf; B:64mm; Weight:0.02 KGS; Clearance:C4; D:210mm; |
| AOHX3288G (23288CAK/W33, 23288CAK, 23288CCK Bearing Withdrawal Sleeve) | Limiting Speed Rating (r/min):32000; Reference Speed Rating (r/min):32500; Fatigue Load Rating (kN):0.053; B:6mm; Clearance:Standard; Seals or Shields:Single Metal Shield; Availability:In Stock; D:19mm; d:6mm; Static Load Rating (kN):1.1; |
| 84697 / CR84697 Stainless Speedi Sleeve For Shaft Repair | Clearance:C3; Seals or Shields:Two Metal Shields; B:33mm; Grease Limiting Speed (r/min):4800; Dynamic Load Rating (kN):92.5; SKU:6313zznrc3-nsk; D:140mm; Availability:In Stock; Weight:2.11 KGS; Static Load Rating (kN):60; |
| TIH 100M/230V Bearing Induction Heater | Fillet Radius ra:2.50 mm; Sealed Speed Rating n3:2000 rpm; B:73.00 mm; Grease Speed Rating n1:2000 rpm; Accessories:Two Seals & Snap-Rin; d:90.000 mm; Basic Static Radial Load Rating Co:196000 N; Oil Speed Rating n2:3000 rpm; Basic Dynamic Radial Load Rating C:212000 N; D:190.0000 mm; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
HMV33E / HMV 33E Hydraulic Nut (M165x3)x238x47mm Video