| No. | Brand | J | F | f | T | A | s | S | r |
| 25kg/Bag | - | - | - | - | - | - | - | - | - |
| ECHX01MI | - | - | - | - | - | - | - | - | - |
| QAR81788 | John Deere | - | - | - | - | - | - | - | - |
| 6200ZZE | Nachi | - | - | - | - | - | - | - | - |
| 27687 | Bower | - | - | - | - | - | - | - | - |
| KC0 | - | - | - | - | - | - | - | 4.763 mm | - |
| 22309EAK | NSK | - | - | - | - | - | - | - | - |
| 17" | - | - | - | - | - | - | - | - | - |
| (LCC-1007) | - | - | - | - | - | - | - | - | - |
| 200W | - | - | 1709 mm | - | - | - | - | - | - |
| CL2B-DAL2 | - | - | - | - | - | - | - | - | - |
| 6.38mm | INA | - | - | - | - | - | - | - | - |
| PartsSH100 | - | - | - | - | - | - | - | - | - |
| 24lbs | - | - | - | - | - | - | - | - | - |
| 21318 | SKF | - | - | - | - | - | - | - | - |
| 821458 | - | - | - | - | - | - | - | - | - |
| 595 | - | - | - | - | - | - | - | - | - |
| OMR125 | - | - | - | - | - | - | - | - | - |
| 22230V | - | - | - | - | - | - | - | - | - |
| 2017 | - | - | - | - | - | - | - | - | - |
| RCTS33SA3 | koyo | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| VL800 | - | - | - | - | - | - | - | - | - |
| (25 | - | - | - | - | - | - | - | - | - |
| KB020XP0 | - | - | - | - | - | - | - | - | - |
| 99501 / CR 99501 Stainless Speedi Sleeve For Shaft Repair | B:9mm; SKU:6200-qbl; d:10mm; Weight:0.02 KGS; Clearance:Standard; Cage Type:Steel; Seals or Shields:Open Type; D:30mm; Availability:In Stock; |
| AH232 Withdrawal Sleeve 150x160x64mm | D:310mm; Availability:In Stock; Seals or Shields:Open Type; Static Load Rating (kN):1800; Fatigue Load Rating (kN):203; Clearance:C3; d:200mm; B:82mm; Dynamic Load Rating (kN):1270; SKU:23040-e1-tvpb-c3-fag; |
| TRC2031 Thrust Bearing Ring / Thrust Needle Bearing Washer 31.75x49.2x2.4mm | Clearance:C3; SKU:23164-e1a-mb1-c3-qbl; Cage Type:Brass; B:176mm; d:320mm; Weight:0.02 KGS; Seals or Shields:Open Type; D:540mm; Availability:In Stock; |
| CP2035 Thrust Plate 20x34.5x0.8mm | Da max.:78 mm; Calculation factor Y2:4.6; B2:13 mm; d3:65 mm; Basic static load rating C0:7.8 kN; D:85 mm; B1:39 mm; Calculation factor e:0.21; da max.:53 mm; Calculation factor Y0:3.2; |
| 75 mm x 115 mm x 20 mm FTRC3552 Thrust Bearing Ring / Thrust Needle Bearing Washer 35x52x2mm | d:90mm; Availability:In Stock; Cage Type:Steel; B:30mm; D:160mm; Clearance:C3; Seals or Shields:Open Type; Weight:0.02 KGS; SKU:1218jc3-qbl; Size (mm):75 mm x 115 mm x 20 mm ; |
| H309X Adapter Sleeve 40x65x39mm | Dynamic Load Rating (kN):11600; B:15.9mm; SKU:3202btnc3-nsk; Weight:0.02 KGS; Cage Type:Plastic; Static Load Rating (kN):6800; Seals or Shields:Open Type; D:35mm; Oil Limiting Speed (r/min):18000; Grease Limiting Speed (r/min):13000; |
| AOH241/950 (241/950CAK30/W33, 241/950CAK, 241/950CCK, 241/950CCK/W33 Bearing Withdrawal Sleeve) | Limiting Speed Rating (r/min):1300; D:280mm; Dynamic Load Rating (kN):1320; d:180mm; Seals or Shields:Open Type; Static Load Rating (kN):2040; B:100mm; Reference Speed Rating (r/min):1500; Weight:22.60 KGS; Cage Type:Steel; |
| ZM08 Precision Locknut (M8x0.75)x16x8mm | Seals or Shields:Open Type; Dynamic Load Rating (kN):14.4; d:30mm; Clearance:Standard; Availability:In Stock; Oil Limiting Speed (r/min):35300; Weight:0.02 KGS; Preload:Light; Cage Type:Plastic; Grease Limiting Speed (r/min):23600; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
HMV24E / HMV 24E Hydraulic Nut (M120x2)x188x44mm Video