| No. | Brand | J | F | f | T | A | s | S | r |
| 46% | - | - | - | - | - | - | - | - | - |
| 6003 | - | - | - | - | - | - | - | - | - |
| 2016-2018 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 400W | - | - | - | - | - | - | - | - | - |
| 60112RS | koyo | - | 78.5 mm | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| 50X90X20 | - | - | - | - | - | - | - | - | - |
| Dh200 | - | - | - | - | - | - | - | - | - |
| N20.5% | - | - | - | - | - | - | - | - | - |
| E0/E1/MDF | INA | - | - | - | - | - | - | - | - |
| 2700K | - | - | - | - | - | - | - | - | - |
| 2303-2RS-TVH | fag | - | - | - | - | - | - | - | - |
| UCFC211 | NSK | - | - | - | - | - | - | - | - |
| 25420 | - | - | - | - | - | - | - | - | - |
| GSX400 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| CH4N2O | - | - | - | - | - | - | - | - | - |
| 5I-7686 | - | - | - | - | - | - | - | - | - |
| RCTS33SA3 | koyo | - | - | - | - | - | - | - | - |
| MB5209XP | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 87531 / CR87531 Stainless Speedi Sleeve For Shaft Repair | Grease Speed Rating n1:3400 rpm; Oil Speed Rating n2:4500 rpm; Fillet Radius ra:2.00 mm; Accessories:Two Shields & Snap-R; D:130.0000 mm; Sealed Speed Rating n3:3400 rpm; d:60.000 mm; B:57.20 mm; Basic Dynamic Radial Load Rating C:134000 N; Basic Static Radial Load Rating Co:143000 N; |
| 85931 / CR85931 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Two Rubber Seals; D:68mm; Weight:0.26 KGS; Clearance:Standard; d:40mm; Reference Speed Rating (r/min):6300; Cage Type:Steel; B:21mm; Static Load Rating (kN):11.6; SKU:63008-2rsr-fag; |
| TKSA 60 Shaft Alignment Tool | SKU:ls13.1/2ac-hoffmann; Clearance:Standard; Seals or Shields:Open Type; Weight:0.02 KGS; Availability:In Stock; B:0.75 Inch; D:3.5 Inch; d:1.625 Inch; |
| TRE3650 Thrust Bearing Ring / Thrust Needle Bearing Washer 57.15x79.375x4mm | G:Tr 710x7; Hydraulic nut:HMV 142E; B5:135 mm; G2:G 1/8; A:8 mm; Lock nut:HM 31/710; G3:13 mm; Locking device:MS 31/710; d3:900 mm; d1:670 mm; |
| FTRA90120 Thrust Bearing Ring / Thrust Needle Bearing Washer 90x120x1mm | h:44.45 mm; Stabilizing ring:SR-20-17; Cap bolt recommended tightening torque:515.2 N·m; P90°:62.3 kN; H2:44.45 mm; L:387.35 mm; Appropriate attachment bolt size G:0.75 in; A2:235.744 mm; PG:1/4 NPT; J1:60.325 mm; |
| LAGG 400B Battery Driven Grease Gun | d:15mm; D:35mm; Seals or Shields:Open Type; Availability:In Stock; B:15.9mm; Weight:0.02 KGS; Clearance:C3; Cage Type:Plastic; SKU:3202btnc3-qbl; |
| 86404 / CR86404 Stainless Speedi Sleeve For Shaft Repair | Fatigue Load Rating (kN):0.225; D:40mm; Seals or Shields:Two Metal Shields; Clearance:Standard; Dynamic Load Rating (kN):10.1; SKU:6203-2zr-fag; Weight:0.02 KGS; Reference Speed Rating (r/min):18100; B:12mm; d:17mm; |
| CR99260 Stainless Steel Speedi Sleeve For Shaft Repair | Cage Type:Steel; Availability:In Stock; Seals or Shields:Single Rubber Seal; D:90mm; B:23mm; Limiting Speed Rating (r/min):5000; Clearance:Standard; Static Load Rating (kN):25; SKU:6308-rsr-fag; Dynamic Load Rating (kN):42.5; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
HMV12 / HMV 12 Hydraulic Nut (M60x2)x125x43mm Video