| No. | Brand | J | F | f | T | A | s | S | r |
| 18mm | - | - | - | - | - | - | - | - | - |
| (25 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| sulphate_10043-01-3 | - | - | - | - | - | - | - | - | - |
| 30313A | - | - | - | - | - | - | - | - | - |
| 10'' | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| PC40MR-1 | Komatsu | - | - | - | - | - | - | - | - |
| 6200ZZE | Nachi | - | - | - | - | - | - | - | - |
| 8155 | - | - | - | - | - | - | - | - | - |
| 6206T2 | NTN | - | - | - | - | - | - | - | - |
| 3-9x40 | IKO | - | - | - | - | - | - | - | - |
| VOE14521451 | - | - | - | - | - | - | - | - | - |
| 5016 | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 1.11/16 | SKF | - | - | - | - | - | - | - | - |
| 5mm | - | - | - | - | - | - | - | - | - |
| 23080CCK/W33 | - | - | - | - | - | - | - | - | - |
| A4VG125 | Rexroth | - | - | - | - | - | - | - | - |
| Cooker(XF-8562-A) | - | - | - | - | - | - | - | - | - |
| GS1268 | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 17% | - | - | - | - | - | - | - | - | - |
| A10Vo | Rexroth | - | - | - | - | - | - | - | - |
| Ap-12 | - | - | - | - | - | - | - | - | - |
| 950 | - | - | - | - | - | - | - | - | - |
| IP67 | - | - | - | - | - | - | - | - | - |
| 50W/100W/150W/200W | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| TRC411 Thrust Bearing Ring / Thrust Needle Bearing Washer 6.35x17.45x2.4mm | l7 min.:88 mm; Mass rod end:15 kg; G:M 80; dk:105 mm; d:80 mm; α:6 °; B:55 mm; Basic static load rating C0:655 kN; Specific dynamic load factor K:100 N/mm²; C1 max.:48 mm; |
| 44 mm x 84 mm x 42 mm 85688 / CR85688 Stainless Speedi Sleeve For Shaft Repair | Static Load Rating (kN):68; Oil Limiting Speed (r/min):12000; Clearance:Standard; SKU:71922acdgb/p4a-skf; B:20mm; Availability:In Stock; Preload:Medium; Cage Type:Plastic; d:110mm; Fatigue Load Rating (kN):2.55; Size (mm):44 mm x 84 mm x 42 mm ; |
| AH3024 Withdrawal Sleeve 115x120x60mm | Oil Speed Rating Open/Shielded n2:9000 rpm; Accessories:Two Shields & Snap-R; Grease Speed Rating n1:7500 rpm; Fillet Radius ra:1.00 mm; Grease Speed Rating Open/Shielded n1:7500 rpm; Basic Dynamic Radial Load Rating C:33200 N; d:45.000 mm; Sealed Speed Rating n3:5000 rpm; Basic Static Radial Load Rating Co:21600 N; Oil Speed Rating n2:9000 rpm; |
| TRD4860 Thrust Bearing Ring / Thrust Needle Bearing Washer 76.2x95.25x3.2mm | Speed Rating (r/min):30900; Cage Type:Plastic; D:47mm; Clearance:Standard; Availability:In Stock; d:25mm; Dynamic Load Rating (kN):7.4; Static Load Rating (kN):12.9; Weight:0.08 KGS; Seals or Shields:Open Type; |
| AOH24148(24148CCK30/W33, 24148CAK30/W33 Bearing Sleeve) | C:880 mm; d:1300 mm; b:22.3 mm; F:1391 mm; D1 ≈:1551.7 mm; r3,4 min.:7.5 mm; B:890 mm; Basic static load rating C0:122000 kN; Calculation factor kr:550; Design variant/feature:BC4.19/W33WI; |
| CR99149 Stainless Steel Speedi Sleeve For Shaft Repair | Calculation factor Y:1.4; Basic dynamic load rating C:1720 kN; r1,2 min.:5 mm; Dimension series:4GD; a:95.132 mm; Basic static load rating C0:2700 kN; Calculation factor e:0.43; db min.:240.5 mm; Mass bearing:59.7 kg; D:400 mm; |
| TMHP 10E Hydraulic Jaw Puller Kit | d:20mm; Dynamic Load Rating (kN):8.71; Cage Type:Plastic; Preload:Light; Oil Limiting Speed (r/min):63000; Grease Limiting Speed (r/min):43000; D:42mm; SKU:7004cd/p4atbta-skf; Seals or Shields:Open Type; Clearance:Standard; |
| HMV10E / HMV 10E Hydraulic Nut (M50x1.5)*114*42mm | Design variant/feature:NNU/W33; Mass bearing:12300 kg; rb max.:8 mm; Limiting speed:150 r/min; r1,2 min.:19 mm; Basic static load rating C0:132000 kN; K:12 mm; Da max.:2260 mm; Fatigue load limit Pu:7100 kN; F:1709 mm; |
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
HMV11 / HMV 11 Hydraulic Nut (M55x2)x120x42mm Video