| No. | Brand | J | F | f | T | A | s | S | r |
| 6mm | - | - | 45 mm | - | - | - | - | - | - |
| WR125 | - | - | - | - | - | - | - | - | - |
| 600X600 | - | - | - | - | - | - | - | - | - |
| ALL72281 | Timken | - | - | - | - | - | - | - | - |
| 594A | Timken | - | - | - | - | - | - | - | - |
| T6C-022-1R00-B1 | Parker | - | - | - | - | - | - | - | - |
| 018/020/045/050/057/063/074/081/098/106/131/141 | - | - | - | - | - | - | - | - | - |
| MI17412 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| 300-500kg/h | - | - | - | - | - | - | - | - | - |
| 6200ZZE | Nachi | - | - | - | - | - | - | - | - |
| F628ZZ | - | - | - | - | - | - | - | - | - |
| H20 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| .25mm | - | - | - | - | - | - | - | - | - |
| 1864 | - | - | - | - | - | - | - | - | - |
| 250 | - | - | - | - | - | 9 mm | - | - | - |
| 32220 | SKF | - | - | - | - | - | - | - | - |
| 57207 | Nachi | - | - | - | - | - | - | - | - |
| MSR16x1.5 Precision Locknut / MSR-M16x1.5 Locking Nut (M16x1.5)x34x18mm | Labyrinth ring:2 x LOR 38; Pa:5.65 kN; A1:79.375 mm; R1:46.038 mm; Appropriate attachment bolt size G:0.625 in; N1:19.05 mm; L:285.75 mm; RG:1/4 NPT; Cap bolt:2 x 1/2-13 UNC; Cap bolt, SAE grade:5; |
| 99587 / CR 99587 Stainless Speedi Sleeve For Shaft Repair | d:240mm; Static Load Rating (kN):1340; Reference Speed Rating (r/min):1600; Limiting Speed Rating (r/min):1300; Seals or Shields:Open Type; D:320mm; Cage Type:Brass; Dynamic Load Rating (kN):785; Weight:12.90 KGS; SKU:23948emw33c3-timken; |
| AS150190 Thrust Needle Roller Bearing Washer 150x190x1mm | Clearance:Standard; Availability:In Stock; Fatigue Load Rating (kN):1.08; d:90mm; SKU:1218/w64-skf; Seals or Shields:Open Type; Limiting Speed Rating (r/min):5300; B:30mm; D:160mm; Weight:2.50 KGS; |
| AHX3024 Withdrawal Sleeve(matched Bearing:23024CCK/W33, C3024K, C3024KV) | Oil Speed Rating n2:5000 rpm; D:8.0000 in; B:1.0000 in; Basic Static Radial Load Rating Co:108000 N; Basic Dynamic Radial Load Rating C:81900 N; Fillet Radius rb:0.040 in; d:6.000 in; Fillet Radius ra:0.10 in; Grease Speed Rating n1:2900 rpm; |
| HMV30E / HMV 30E Hydraulic Nut (M150x2)x220x46mm | B:87mm; Seals or Shields:Open Type; Weight:21.00 KGS; d:160mm; Clearance:Standard; Availability:In Stock; Cage Type:Brass; SKU:51332m-qbl; D:270mm; |
| CP47095 Thrust Plate 70x94.3x4mm | Reference Speed Rating (r/min):4500; Availability:In Stock; Fatigue Load Rating (kN):3; D:270mm; Seals or Shields:Open Type; d:220mm; Static Load Rating (kN):110; Dynamic Load Rating (kN):78; B:24mm; SKU:61844/c3-skf; |
| TRC3244 Thrust Bearing Ring / Thrust Needle Bearing Washer 50.8x69.85x2.4mm | B:6mm; SKU:6900dd-nsk; Availability:In Stock; Static Load Rating (kN):1.27; Clearance:Standard; Grease Limiting Speed (r/min):32000; D:22mm; Dynamic Load Rating (kN):2.7; d:10mm; Oil Limiting Speed (r/min):38000; |
| TRA815 Thrust Bearing Ring / Thrust Needle Bearing Washer 12.7x23.8x0.8mm | Static Load Rating (kN):1660; Seals or Shields:Open Type; Clearance:C4; Fatigue Load Rating (kN):153; SKU:23232cck/c4w33-skf; Dynamic Load Rating (kN):1220; Availability:In Stock; D:290mm; Limiting Speed Rating (r/min):2200; Weight:0.02 KGS; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Tapered Roller Bearings33019-xl 95X145X39MM Video