| No. | Brand | J | F | f | T | A | s | S | r |
| 697-2RS | - | - | - | - | - | - | - | - | - |
| 2-Way | - | - | - | - | - | - | - | - | - |
| 8x14x4mm | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | 66.675 mm | - | - | - | - |
| 36-Clips | - | - | - | - | - | - | - | - | - |
| A6V28HA1H | - | - | - | - | - | - | - | - | - |
| 20pcs | - | - | - | - | - | - | - | - | - |
| 5725470220 | Rexroth | - | - | - | - | - | - | - | - |
| 600x400 | - | - | - | - | - | - | - | - | - |
| QAR81788 | John Deere | - | - | - | - | - | - | - | - |
| 30W-150W | - | - | - | - | - | - | - | - | - |
| 5x9x3mm | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 8x16x5 | - | - | - | - | - | - | - | - | - |
| BMV630 | - | - | - | - | - | - | - | - | - |
| N211W | NSK | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| 520 | - | - | - | 8 mm | - | - | - | - | - |
| 70x100x16 | - | - | - | - | - | - | - | - | - |
| 2016 | - | - | 125 mm | - | - | - | - | - | - |
| Ex200 | Hitachi | - | - | - | - | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| 315 | - | - | - | - | - | - | - | - | - |
| 52x | - | - | - | - | - | - | - | - | - |
| 5.8g | - | - | - | - | - | - | - | - | - |
| 5/10/20pcs | - | - | - | - | - | - | - | - | - |
| 182 | INA | - | - | - | - | - | - | - | - |
| TRC2435 Thrust Bearing Ring / Thrust Needle Bearing Washer 38.1x55.55x2.4mm | d:55mm; Availability:In Stock; Dynamic Load Rating (kN):43.4; Seals or Shields:Two Metal Shields; Cage Type:Steel; Limiting Speed Rating (r/min):6300; Weight:0.02 KGS; B:21mm; Static Load Rating (kN):29.4; D:100mm; |
| CP4060 Thrust Plate 40x59.5x0.8mm | d:30.000 mm; D:62.0000 mm; Basic Static Radial Load Rating Co:11800 N; Grease Speed Rating n1:10000 rpm; Oil Speed Rating n2:13000 rpm; Fillet Radius ra:1.00 mm; B:16.00 mm; Basic Dynamic Radial Load Rating C:16800 N; |
| HMV38E / HMV 38E Hydraulic Nut (M190x3)x270x50mm | B:41 mm; D:440 mm; Basic dynamic load rating C:2400 kN; Fatigue load limit Pu:915 kN; Basic static load rating C0:12000 kN; Reference speed:340 r/min; ra max.:5 mm; d:240 mm; Mass bearing:88 kg; da min.:433 mm; |
| LAGG 400B Battery Driven Grease Gun | d:15mm; D:35mm; Seals or Shields:Open Type; Availability:In Stock; B:15.9mm; Weight:0.02 KGS; Clearance:C3; Cage Type:Plastic; SKU:3202btnc3-qbl; |
| CP475100 Thrust Plate 75x99.3x4mm | D:200mm; Availability:In Stock; SKU:23124-e1a-m-qbl; Clearance:Standard; Weight:0.02 KGS; d:120mm; Cage Type:Brass; Seals or Shields:Open Type; B:62mm; |
| 87914 / CR87914 Stainless Speedi Sleeve For Shaft Repair | D:400mm; SKU:23148-e1-k-qbl; Availability:In Stock; B:128mm; Clearance:Standard; Seals or Shields:Open Type; Weight:0.02 KGS; d:240mm; Cage Type:Steel; |
| AH24136 Withdrawal Sleeve(matched Bearing:24136CCK,24136CAK,24136CCK30/W33, C4136K30V) | d:60mm; Fatigue Load Rating (kN):0.98; Cage Type:Steel; Weight:0.02 KGS; Limiting Speed Rating (r/min):9500; Seals or Shields:Two Metal Shields; Dynamic Load Rating (kN):30.7; Static Load Rating (kN):23.2; Reference Speed Rating (r/min):15000; Clearance:C3; |
| CR99810 Stainless Steel Speedi Sleeve For Shaft Repair | Weight:0.02 KGS; Cage Type:Steel; d:34.925mm; Fatigue Load Rating (kN):15.7; Dynamic Load Rating (kN):109; Static Load Rating (kN):105; B:29.37mm; Availability:In Stock; Oil Limiting Speed (r/min):6900; Seals or Shields:Open Type; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
AS160200 Thrust Needle Roller Bearing Washer 160x200x1mm Video