| No. | Brand | J | F | f | T | A | s | S | r |
| 61804-2RS | INA | - | - | - | - | - | - | - | - |
| 1220X2440mm | - | - | - | - | - | - | - | - | - |
| 316ss | - | - | - | - | - | - | - | - | - |
| 3LB1 | - | - | - | - | - | - | - | - | - |
| 200W | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 4X8FT | - | - | - | - | - | - | - | - | - |
| 6206-2RS1/C3 | SKF | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| SK50 | - | - | - | - | - | - | - | - | - |
| 2X(607Z | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 32006J | koyo | - | - | - | - | - | - | - | - |
| AN14 | NTN | - | - | - | - | - | - | - | - |
| 22213-EK | - | - | - | - | - | - | - | - | - |
| VL800 | - | - | - | - | - | - | - | - | - |
| 1000 | NTN | 92 mm | - | - | - | 35 mm | - | - | - |
| 80W | - | - | - | - | - | - | - | - | - |
| 1100X1100 | - | - | - | - | - | - | - | - | - |
| 6416 | - | - | - | - | - | - | - | - | - |
| AH24040 Withdrawal Sleeve(matched Bearing:24040CCK,24040CAK, 24040CCK30/W33, C4040K30V) | D:52.0000 mm; Basic Dynamic Radial Load Rating C:15900 N; Oil Speed Rating Open/Shielded n2:14000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:10200 N; B:15.00 mm; Accessories:Snap-Ring; d:20.000 mm; Grease Speed Rating Open/Shielded n1:11000 rpm; |
| 87789 / CR87789 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; d:60mm; Availability:In Stock; SKU:2mm9312wicrsul-timke; Clearance:Standard; Static Load Rating (kN):22.7; Cage Type:Plastic; Speed Rating (r/min):15300; Weight:0.20 KGS; B:13mm; |
| CP2542 Thrust Plate 25x41.5x0.8mm | d:20mm; B:12mm; Weight:0.02 KGS; D:42mm; SKU:7004a5trdump3-nsk; Seals or Shields:Open Type; Availability:In Stock; Preload:Medium; Grease Limiting Speed (r/min):32300; Dynamic Load Rating (kN):10.6; |
| AS120155 Thrust Needle Roller Bearing Washer 120x155x1mm | Grease Limiting Speed (r/min):73000; D:22mm; Seals or Shields:Open Type; Static Load Rating (kN):1.52; Preload:Light; Clearance:Standard; Oil Limiting Speed (r/min):100000; Dynamic Load Rating (kN):3; SKU:7900cydu/glp4-nachi; Cage Type:Plastic; |
| FTRA2035 Thrust Bearing Ring / Thrust Needle Bearing Washer 20x35x1mm | Weight:0.02 KGS; SKU:22324cc/w33-qbl; D:260mm; d:120mm; Availability:In Stock; Seals or Shields:Open Type; Cage Type:Steel; Clearance:Standard; B:86mm; |
| CP475100 Thrust Plate 75x99.3x4mm | D:200mm; Availability:In Stock; SKU:23124-e1a-m-qbl; Clearance:Standard; Weight:0.02 KGS; d:120mm; Cage Type:Brass; Seals or Shields:Open Type; B:62mm; |
| EAZ 166 Induction Heater | Static Load Rating (kN):183; SKU:22309-e1-c4-fag; B:36mm; d:45mm; Reference Speed Rating (r/min):5000; Weight:0.02 KGS; Fatigue Load Rating (kN):16.1; Seals or Shields:Open Type; Cage Type:Steel; Dynamic Load Rating (kN):187; |
| AOH24048 (24048CAK30/W33, 24048CCK30/W33 Bearing Withdrawal Sleeve) | Cage Type:Plastic; Static Load Rating (kN):5.115; Clearance:Standard; D:55mm; Dynamic Load Rating (kN):2.847; Availability:In Stock; Weight:0.08 KGS; B:10mm; Seals or Shields:Open Type; SKU:2mmvc9307hxcrsul-tim; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
AS5578 Thrust Needle Roller Bearing Washer 55x78x1mm Video