| No. | Brand | J | F | f | T | A | s | S | r |
| 1W | - | - | - | - | - | - | - | - | - |
| 100% | - | - | - | - | - | - | - | - | - |
| 5W | - | - | - | - | - | - | - | - | - |
| 12125-02-9 | - | - | - | - | - | - | - | - | - |
| 85mm | - | - | - | - | - | 4.2 mm | - | - | - |
| T396ZX | - | - | - | - | - | - | - | - | - |
| 1600 | - | - | - | - | - | - | - | - | - |
| 481416 | Parker | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 6005ZZENR | Nachi | - | - | - | - | - | - | - | - |
| 6200ZZE | Nachi | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| F628ZZ | - | - | - | - | - | - | - | - | - |
| 22217-EKC3W33 | SKF | - | - | - | - | - | - | - | - |
| 4X8 | - | - | - | - | - | - | - | - | - |
| 50% | - | - | - | - | - | - | - | - | - |
| 57207 | Nachi | - | - | - | - | - | - | - | - |
| JBU733 | TRW | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | 36 mm | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| GNX250 | - | - | - | - | - | - | - | - | - |
| 600x400 | - | - | - | - | - | - | - | - | - |
| 160.16.1424 | - | - | - | - | - | - | - | - | - |
| 6213-MA-P6-C3 | fag | - | - | - | - | - | - | - | - |
| 23028-E1-TVPB | INA | - | - | - | - | - | - | - | - |
| 1600 | - | - | - | - | - | - | - | - | - |
| 501 | - | - | - | - | - | - | - | - | - |
| 25W | - | - | - | - | - | - | - | - | - |
| AH24140 Withdrawal Sleeve(matched Bearing:24140CCK,24140CAK,24140CCK30/W33, C4140K30V) | SKU:16038-fag; D:290mm; Cage Type:Steel; Weight:7.04 KGS; Availability:In Stock; Fatigue Load Rating (kN):6.3; d:190mm; B:31mm; Clearance:Standard; Static Load Rating (kN):166; |
| CP1326 Thrust Plate 13x25.5x0.8mm | Clearance:C3; Dynamic Load Rating (kN):950; Seals or Shields:Open Type; Weight:0.02 KGS; Reference Speed Rating (r/min):2130; Static Load Rating (kN):1070; D:240mm; SKU:22322-e1a-k-m-c3-fag; Limiting Speed Rating (r/min):2600; Availability:In Stock; |
| CPR81216 Thrust Plate 80x115x8.5mm | B:0.688 Inch; Seals or Shields:Open Type; d:0.875 Inch; D:2.25 Inch; Weight:0.02 KGS; SKU:ams7-skf; Availability:In Stock; Clearance:Standard; |
| TKSA 40 Shaft Alignment Tool | d:50.000 mm; B:31.00 mm; Sealed Speed Rating n3:3700 rpm; Grease Speed Rating Open/Shielded n1:5200 rpm; Basic Static Radial Load Rating Co:52000 N; Accessories:One Shield & Snap-Ri; Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:6300 rpm; D:130.0000 mm; Basic Dynamic Radial Load Rating C:87100 N; |
| 87530 / CR87530 Stainless Speedi Sleeve For Shaft Repair | D:280mm; Seals or Shields:Open Type; B:46mm; Static Load Rating (kN):244.4; Speed Rating (r/min):4200; Clearance:Standard; Cage Type:Plastic; Weight:9.25 KGS; d:180mm; Dynamic Load Rating (kN):262.4; |
| TRC4052 Thrust Bearing Ring / Thrust Needle Bearing Washer 63.5x82.55x2.4mm | Seals or Shields:Open Type; SKU:23226-e1a-m-fag; Static Load Rating (kN):1150; Clearance:Standard; Weight:0.02 KGS; Cage Type:Brass; d:130mm; D:230mm; Fatigue Load Rating (kN):89; B:80mm; |
| CR99248 Stainless Steel Speedi Sleeve For Shaft Repair | SKU:24026ejw33w89c4-timk; Limiting Speed Rating (r/min):2000; B:69mm; Clearance:C4; Availability:In Stock; Static Load Rating (kN):966; d:130mm; Reference Speed Rating (r/min):2400; Dynamic Load Rating (kN):664; Seals or Shields:Open Type; |
| HMV46E / HMV 46E Hydraulic Nut 232x318x53mm | B:12.5 mm; Mass inner ring:0.0052 kg; F:13 mm; d:10 mm; r, r1,2 min.:0.3 mm; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
AS4060 Thrust Needle Roller Bearing Washer 40x60x1mm Video