| No. | Brand | J | F | f | T | A | s | S | r |
| OMR-160 | - | - | - | - | - | 12 mm | - | - | - |
| 210lm/W | - | - | - | - | - | - | - | - | - |
| 7317BYG | SKF | - | - | - | - | - | - | - | - |
| 60% | - | - | - | - | - | - | - | - | - |
| (20.5% | - | - | - | - | - | - | - | - | - |
| 100M | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| X90 | - | - | - | - | - | - | - | - | - |
| 6251-11-3200 | - | - | - | - | - | - | - | - | - |
| Tgs1717 | - | - | - | - | - | - | - | - | - |
| EX270-5 | - | - | - | - | - | - | - | - | - |
| 17% | - | - | - | - | - | - | - | - | - |
| 8x16x5 | - | - | - | - | - | - | - | - | - |
| 387-9434 | - | - | - | - | - | - | - | - | - |
| GSX400 | - | - | - | - | - | - | - | - | - |
| FZR750 | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 98%Min | - | - | - | - | - | - | - | - | - |
| 120 | - | - | - | - | - | - | - | - | - |
| A6V28HA1H | - | - | - | - | - | - | - | - | - |
| 2258 | - | - | - | - | - | - | - | - | - |
| P117FS21R | Rexroth | - | - | - | - | - | - | - | - |
| 30LEDs/M | - | - | - | - | - | - | - | - | - |
| 5gallon | - | - | - | - | - | - | - | - | - |
| Bus,230P,DHY,D8C,D9B,DJY,XUD9TE,RFW | - | - | - | - | - | - | - | - | - |
| DT125MX | NTN | - | - | - | - | - | - | - | - |
| 11 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 6.38 | INA | - | - | - | - | - | - | - | - |
| SMD1808 | - | - | - | - | - | - | - | - | - |
| 85469 / CR85469 Stainless Speedi Sleeve For Shaft Repair | Availability:In Stock; Limiting Speed Rating (r/min):4000; SKU:22317-e1a-k-m-c3-fag; Fatigue Load Rating (kN):50; B:60mm; Seals or Shields:Open Type; D:180mm; Dynamic Load Rating (kN):540; Cage Type:Brass; Static Load Rating (kN):560; |
| 84576 / CR84576 Stainless Speedi Sleeve For Shaft Repair | P120°:107 kN; P90°:173 kN; Cap bolt recommended tightening torque:271.2 N·m; L:711.2 mm; H:401.637 mm; H2:79.375 mm; P180°:113 kN; Mass pillow block:178 kg; End plug (suffix Y):EPR 16; J max.:619.125 mm; |
| 90075 / CR90075 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; Preload:Light; Weight:0.02 KGS; Grease Limiting Speed (r/min):15400; B:19mm; D:85mm; Clearance:Standard; SKU:7209a5trsulp3-nsk; d:45mm; Availability:In Stock; |
| AHX320 Withdrawal Sleeve(matched Bearing:2220K, 1320K, 22220EK, 21320CCK, C2220K) | Oil Limiting Speed (r/min):9800; D:230mm; Availability:In Stock; Clearance:Standard; SKU:7226ctrdulp3-nsk; Seals or Shields:Open Type; Static Load Rating (kN):209; Cage Type:Plastic; Weight:0.02 KGS; Preload:Light; |
| FTRD80105 Thrust Bearing Ring / Thrust Needle Bearing Washer 80x105x2.5mm | Basic Static Radial Load Rating Co:176000 N; Grease Speed Rating n1:2600 rpm; d:85.000 mm; Oil Speed Rating n2:3600 rpm; B:49.20 mm; Accessories:Shield & Seal; D:150.0000 mm; Sealed Speed Rating n3:2600 rpm; Basic Dynamic Radial Load Rating C:142000 N; Fillet Radius ra:2.00 mm; |
| 99282 / CR99282 Stainless Speedi Sleeve For Shaft Repair | Basic Dynamic Radial Load Rating C:78100 N; B:38.10 mm; d:60.000 mm; Sealed Speed Rating n3:4300 rpm; Fillet Radius ra:1.50 mm; Accessories:Two Shields & Snap-R; Grease Speed Rating n1:3800 rpm; Basic Static Radial Load Rating Co:88000 N; D:110.0000 mm; Oil Speed Rating n2:5000 rpm; |
| CR99224 Stainless Steel Speedi Sleeve For Shaft Repair | Calculation factor Y0:1.8; d2 ≈:574 mm; r1,2 min.:7.5 mm; Reference speed:400 r/min; G:Tr 480x5; b:22.3 mm; B:296 mm; Da max.:798 mm; Mass bearing + sleeve:725 kg; K:12 mm; |
| 22 mm x 50 mm x 14 mm 99854 / CR99854 Stainless Speedi Sleeve For Shaft Repair | Size (mm):22 mm x 50 mm x 14 mm ; |
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
87850 / CR87850 Stainless Speedi Sleeve For Shaft Repair Video