| No. | Brand | J | F | f | T | A | s | S | r |
| 9234004 | - | - | - | - | - | - | - | - | - |
| 38W | INA | - | - | - | - | - | - | - | - |
| 19 | - | - | - | - | - | - | - | - | - |
| 3-19mm | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 6303ZZ | - | - | - | - | - | - | - | - | - |
| 32006J | koyo | - | - | - | - | - | - | - | - |
| J1 | - | - | - | - | - | - | - | - | - |
| GNX250 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 1996-2000 | Timken | - | - | - | - | - | - | - | - |
| 6745-11-3102 | - | - | - | - | - | - | - | - | - |
| 2020 | - | - | - | - | - | - | - | - | - |
| Rhb306 | - | - | - | - | - | - | - | - | - |
| MR-2 | Nachi | - | - | - | - | - | - | - | - |
| 500tph | - | - | - | - | - | - | - | - | - |
| 2x | - | - | - | - | - | - | - | - | - |
| 3.6mm | - | - | - | - | - | - | - | - | - |
| 900 | NTN | - | - | - | - | - | - | - | - |
| 24VDC | - | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| NUP311 | NSK | - | - | - | - | - | - | - | - |
| ZAXIS450 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| KMX15RA | INA | - | - | - | - | - | - | - | - |
| 3780 | Timken | - | - | - | - | - | - | - | - |
| 22310-E1-T41A | fag | - | - | - | - | - | - | - | - |
| Cylindrical Roller Bearings NU336-E-XL-TVP2 180x380x75mm | Da:289.999 mm; Eye bolt:2 x 3/8-16 UNC; Cap bolt, SAE grade:5; PG:1/4 NPT; L:558.8 mm; J max.:488.95 mm; J min.:441.325 mm; Cap bolt:4 x 3/4-10 UNC; P60°:226 kN; Max. speed for Taconite seal:560 r/min; |
| CP475100 Thrust Plate 75x99.3x4mm | D:200mm; Availability:In Stock; SKU:23124-e1a-m-qbl; Clearance:Standard; Weight:0.02 KGS; d:120mm; Cage Type:Brass; Seals or Shields:Open Type; B:62mm; |
| TRB2233 Thrust Bearing Ring / Thrust Needle Bearing Washer 34.925x52.375x1.6mm | D:62mm; Cage Type:Plastic; d:30mm; SKU:3206b-2rstnc3-qbl; Seals or Shields:Two Rubber Seals; Clearance:C3; Weight:0.02 KGS; Availability:In Stock; B:23.8mm; |
| 81753 / CR81753 Stainless Speedi Sleeve For Shaft Repair | a:27.732 mm; Basic dynamic load rating C:240 kN; ra max.:3 mm; B:33 mm; T:36 mm; r1,2 min.:3 mm; d1 ≈:98.75 mm; Da max.:129 mm; d:65 mm; Limiting speed:4800 r/min; |
| 99452 / CR 99452 Stainless Speedi Sleeve For Shaft Repair | Sealed Speed Rating n3:3400 rpm; Basic Dynamic Radial Load Rating C:25100 N; B:16.00 mm; Basic Static Radial Load Rating Co:24000 N; Grease Speed Rating Open/Shielded n1:5600 rpm; d:80.000 mm; Oil Speed Rating Open/Shielded n2:6700 rpm; Fillet Radius ra:1.00 mm; Accessories:Two Shields; D:110.0000 mm; |
| CR99100 Stainless Steel Speedi Sleeve For Shaft Repair | D:320mm; Clearance:C2; Weight:0.02 KGS; d:180mm; SKU:22236cc/c2w33-qbl; Availability:In Stock; Cage Type:Steel; B:86mm; Seals or Shields:Open Type; |
| 81354 / CR81354 Stainless Speedi Sleeve For Shaft Repair | Grease Speed Rating n1:3600 rpm; Fillet Radius rb:1.00 mm; Oil Speed Rating n2:4300 rpm; Fillet Radius ra:2.50 mm; Basic Static Radial Load Rating Co:156000 N; B:41.00 mm; D:180.0000 mm; Basic Dynamic Radial Load Rating C:182000 N; d:85.000 mm; |
| FTRC6085 Thrust Bearing Ring / Thrust Needle Bearing Washer 60x85x2mm | Dynamic Load Rating (kN):250; Availability:In Stock; Seals or Shields:Open Type; Grease Limiting Speed (r/min):3000; Weight:2.54 KGS; SKU:22217eake4c3-nsk; B:36mm; D:150mm; Static Load Rating (kN):325; Cage Type:Steel; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
86641 / CR86641 Stainless Speedi Sleeve For Shaft Repair Video