| No. | Brand | J | F | f | T | A | s | S | r |
| 7216 | - | - | - | - | - | - | - | - | - |
| 1220x2440mm | - | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| (BDZ-155-A(ZA-2)) | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | 34.925 mm | - | - | - | - |
| 2.0D | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 3/4/5/6/7/8/9MM | - | - | - | - | - | - | - | - | - |
| 27687 | Bower | - | - | - | - | - | - | - | - |
| JBU733 | TRW | - | - | - | - | - | - | - | - |
| 6303ZZ | - | - | - | - | - | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| 6310 | NSK | - | - | - | - | - | - | - | - |
| r404063451 | Rexroth | - | - | - | - | - | - | - | - |
| 150W | - | - | - | - | - | - | - | - | - |
| (1M2) | - | - | - | - | - | - | - | - | - |
| DAC40740036/34 | NTN | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 6005ZZENR | Nachi | - | - | - | - | - | - | - | - |
| 16 | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| 40X74X36 | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| 1000mm | - | - | - | - | - | - | - | - | - |
| AP2D36 | - | - | - | - | - | - | - | - | - |
| 182 | INA | - | - | - | - | - | - | - | - |
| AHX3080 Withdrawal Sleeve 380x400x183mm | D3:44.6 mm; Period accuracy ±:3 %; C:2.46 mm; d:20 mm; Calculation factor f0:13; Snap ring:SP 47; d2:28.69 mm; Phase shift output signal tolerance ±:30 °; b:1.35 mm; D2:46.56 mm; |
| AS120155 Thrust Needle Roller Bearing Washer 120x155x1mm | Grease Limiting Speed (r/min):73000; D:22mm; Seals or Shields:Open Type; Static Load Rating (kN):1.52; Preload:Light; Clearance:Standard; Oil Limiting Speed (r/min):100000; Dynamic Load Rating (kN):3; SKU:7900cydu/glp4-nachi; Cage Type:Plastic; |
| AHX318 Withdrawal Sleeve (matched Bearing:2218K, 1318K, 22218EK,21318CCK, C2218K, C2218KV) | d:65mm; D:120mm; SKU:3213b-2rstn-qbl; Clearance:Standard; B:38.1mm; Cage Type:Plastic; Seals or Shields:Two Rubber Seals; Weight:0.02 KGS; Availability:In Stock; |
| Plummer Block Housings SNV180-F-L + 22317-K + H2317X300 + TCV617X300 | B:22mm; D:110mm; Availability:In Stock; Weight:0.02 KGS; Clearance:C3; Seals or Shields:Two Rubber Seals; Cage Type:Steel; d:60mm; SKU:6212-2rs/c3-qbl; |
| TRD5266 Thrust Bearing Ring / Thrust Needle Bearing Washer 82.55x104.775x3.2mm | Basic dynamic load rating C:19 kN; Designation associated SD design radial shaft seal with a low cross-sectional height:SD 22x30x4; Ew:30 mm; Basic static load rating C0:23.6 kN; Fw:22 mm; Designation associated G design radial shaft seal with a low cross-sectional height:G 22x30x4; Limiting speed:19000 r/min; Reference speed:17000 r/min; Mass needle roller and cage assembly:0.018 kg; U:15 mm; |
| AHX2316 Withdrawal Sleeve(matched Bearing:2316K, 22316EK, C2316K) | Dynamic Load Rating (kN):14.6; Static Load Rating (kN):9; Seals or Shields:Open Type; Clearance:Standard; Weight:0.09 KGS; Cage Type:Plastic; Availability:In Stock; Reference Speed Rating (r/min):15500; d:17mm; B:17.5mm; |
| ZM115 Precision Locknut (M115x2)x150x22mm | Lock nut:AN 18; G:89.586 mm; d1:80.963 mm; B4:19.863 mm; Lock washer:W 18; B:17.729 mm; Mass adapter sleeve assembly:1.8 kg; B1:89.992 mm; Hydraulic nut:HMVC 18E; Sleeve:S 118x3.3/16; |
| 17 mm x 30 mm x 7 mm TRE2031 Thrust Bearing Ring / Thrust Needle Bearing Washer 31.75x49.2x4mm | Limiting Speed Rating (r/min):760; D:420mm; Clearance:C3; Cage Type:Brass; d:280mm; Availability:In Stock; Weight:68.00 KGS; Dynamic Load Rating (kN):2420; SKU:24056kembw33c3-timke; Reference Speed Rating (r/min):860; Size (mm):17 mm x 30 mm x 7 mm ; |
87623 / CR87623 Stainless Speedi Sleeve For Shaft Repair Video