| No. | Brand | J | F | f | T | A | s | S | r |
| 6.38 | INA | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| NUP2216 | NSK | - | - | - | - | - | - | - | - |
| 32209/Q | SKF | - | - | - | - | - | - | - | - |
| 801002 | - | - | - | - | - | - | - | - | - |
| 3800 | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| 100W | - | - | - | - | - | - | - | - | - |
| 1100.32.00. | - | - | - | - | - | - | - | - | - |
| 52218 | fag | - | - | - | - | - | - | - | - |
| 71335SN2AVJ1 | Parker | - | - | - | - | - | - | - | - |
| L0098953B | Parker | - | - | - | - | - | - | - | - |
| PV020, | Parker | - | - | - | - | - | - | - | - |
| MU1012L | Bower | - | - | - | - | - | - | - | - |
| 90% | - | - | - | - | - | 185 mm | - | - | - |
| IP67 | - | - | - | - | - | - | - | - | - |
| 6900 | - | - | - | - | - | - | - | - | - |
| CAS12125-02-9 | - | - | - | - | - | - | - | - | - |
| HK1015 | - | - | - | - | - | - | - | - | - |
| 200W | - | - | 1709 mm | - | - | - | - | - | - |
| 22256EMB | INA | - | - | - | - | - | - | - | - |
| A4vg28/A4vg40/A4vg56 | Rexroth | - | - | - | - | - | - | - | - |
| Ve9 | - | - | - | - | - | - | - | - | - |
| NU314W | NSK | - | - | - | - | - | - | - | - |
| CR99250 Stainless Steel Speedi Sleeve For Shaft Repair | P90°:94.3 kN; Cap bolt:1/2-13 UNC; Cap bolt recommended tightening torque:149.1 N·m; P60°:157 kN; Bearing:22218 EK; End plug (suffix Y):EPR 11; N1:19.05 mm; P120°:59.6 kN; H1:101.6 mm; L:349.25 mm; |
| 97064 / CR97064 Stainless Speedi Sleeve For Shaft Repair | SKU:6302-2zr-fag; Cage Type:Steel; Seals or Shields:Two Metal Shields; Fatigue Load Rating (kN):0.27; Dynamic Load Rating (kN):12; Static Load Rating (kN):5.3; d:15mm; Weight:0.02 KGS; Clearance:Standard; Limiting Speed Rating (r/min):20800; |
| Plummer Block Housings SNV130-F-L + 22312-K + H2312X202 + TCV612X202 | Mass bearing:470 kg; Limiting speed:1100 r/min; Calculation factor e:1.34; ra max.:6 mm; h:20.5 mm; d:480 mm; Fatigue load limit Pu:76.5 kN; r1,2 min.:7.5 mm; D1 ≈:721 mm; Calculation factor Y0:0.44; |
| TRA815 Thrust Bearing Ring / Thrust Needle Bearing Washer 12.7x23.8x0.8mm | Static Load Rating (kN):1660; Seals or Shields:Open Type; Clearance:C4; Fatigue Load Rating (kN):153; SKU:23232cck/c4w33-skf; Dynamic Load Rating (kN):1220; Availability:In Stock; D:290mm; Limiting Speed Rating (r/min):2200; Weight:0.02 KGS; |
| 86798 / CR86798 Stainless Speedi Sleeve For Shaft Repair | Accessories:One Seal; d:280.000 mm; Basic Static Radial Load Rating Co:285000 N; Grease Speed Rating Open/Shielded n1:1500 rpm; Sealed Speed Rating n3:950 rpm; Oil Speed Rating Open/Shielded n2:1800 rpm; B:46.00 mm; Fillet Radius ra:2.00 mm; D:380.0000 mm; Basic Dynamic Radial Load Rating C:216000 N; |
| 85654 / CR85654 Stainless Speedi Sleeve For Shaft Repair | Weight:111.40 KGS; Static Load Rating (kN):4800; Clearance:C4; B:180mm; Availability:In Stock; Reference Speed Rating (r/min):580; D:440mm; Dynamic Load Rating (kN):3160; SKU:24152kembw33w45ac4-t; Seals or Shields:Open Type; |
| FTRC90120 Thrust Bearing Ring / Thrust Needle Bearing Washer 90x120x2mm | Sealed Speed Rating n3:1400 rpm; d:190.000 mm; Accessories:Snap-Ring; Grease Speed Rating Open/Shielded n1:2000 rpm; Fillet Radius ra:2.00 mm; B:46.00 mm; Basic Static Radial Load Rating Co:216000 N; Basic Dynamic Radial Load Rating C:195000 N; D:290.0000 mm; Oil Speed Rating Open/Shielded n2:2600 rpm; |
| 99494 / CR 99494 Stainless Speedi Sleeve For Shaft Repair | A:35 mm; Thread grub screw G2:5/16-24 UNF; Recommended diameter for attachment bolts, mm G:12 mm; Hexagonal key size for grub screw N:3.969 mm; Db:90 mm; J:92 mm; Housing:FYWK 507 Y; Basic dynamic load rating C:25.5 kN; L:118 mm; End cover:ECW 207; |
FTRC100135 Thrust Bearing Ring / Thrust Needle Bearing Washer 100x135x2mm Video