| No. | Brand | J | F | f | T | A | s | S | r |
| 10 | - | - | - | - | - | - | - | - | - |
| 15mm | INA | - | - | - | - | - | - | - | - |
| Max40d | - | - | - | - | - | - | - | - | - |
| 315 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 5mm | - | - | - | - | - | - | - | - | - |
| 400W | - | - | - | - | - | - | - | - | - |
| 40W | - | - | - | - | - | - | - | - | - |
| 2 | Thomson | - | - | - | - | - | - | - | - |
| 33205 | Timken | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| (NH4)2SO4 | - | - | - | - | - | - | - | - | - |
| 1 | Danfoss | - | - | - | - | - | - | - | - |
| 28X58X16 | - | - | - | - | - | - | - | - | - |
| Light/50W/Solar | - | 273.05 mm | - | - | - | - | 41.275 mm | 0.794 mm | - |
| PV092L1K1T1N001 | Parker | - | - | - | - | - | - | - | - |
| 1220X2440mm | INA | - | - | - | - | - | - | - | - |
| 99002 | - | - | - | - | - | - | - | - | - |
| 32MCY14-1D/T | - | - | - | - | - | - | - | - | - |
| 22309EAK | NSK | - | - | - | - | - | - | - | - |
| 17X47X14 | - | - | - | - | - | - | - | - | - |
| 1.11/16 | SKF | - | - | - | - | - | - | - | - |
| SR45TB1SS | thk | - | - | - | - | - | - | - | - |
| 12W/18W/24W/36W | - | - | - | - | - | - | - | - | - |
| 24V | - | - | - | - | - | - | - | - | - |
| 24VDC | - | - | - | - | - | - | - | - | - |
| 6D16 | - | - | - | - | - | - | - | - | - |
| TRD4052 Thrust Bearing Ring / Thrust Needle Bearing Washer 63.5x82.55x3.2mm | Dynamic Load Rating (kN):27.3; B:16mm; D:100mm; SKU:3mm9314wicrduh-timke; Clearance:Standard; Static Load Rating (kN):30.2; Availability:In Stock; Seals or Shields:Open Type; Speed Rating (r/min):11800; Weight:0.34 KGS; |
| AHX334 Withdrawal Sleeve 160x170x93mm | Permissible angular misalignment α:3 °; r1,2 min.:1.5 mm; Da max.:91 mm; Basic static load rating C0:19.3 kN; Limiting speed:9000 r/min; da max.:60 mm; Fatigue load limit Pu:1 kN; Calculation factor Y1:1.9; D1 ≈:86 mm; Calculation factor e:0.33; |
| 99850 / CR99850 Stainless Speedi Sleeve For Shaft Repair | B:37mm; Cage Type:Brass; d:90mm; Dynamic Load Rating (kN):143; Static Load Rating (kN):228; D:140mm; SKU:nn3018m2kc1nap5-nach; Availability:In Stock; Oil Limiting Speed (r/min):7800; Seals or Shields:Open Type; |
| AOH30/900 (230/900CAK, 230/900CCK, 230/900CAK/W33, C30/900KM Bearing Withdrawal Sleeve) | Seals or Shields:Open Type; d:60mm; SKU:30212-koyo; Grease Limiting Speed (r/min):3500; B:23.75mm; Availability:In Stock; Dynamic Load Rating (kN):133; Static Load Rating (kN):127; Oil Limiting Speed (r/min):4700; Cage Type:Steel; |
| EAZ 222-2 Induction Heater | Limiting Speed Rating (r/min):780; Static Load Rating (kN):3140; Weight:45.00 KGS; Reference Speed Rating (r/min):920; B:90mm; D:480mm; Availability:In Stock; Cage Type:Brass; Dynamic Load Rating (kN):1710; Clearance:Standard; |
| 90800 / CR90800 Stainless Speedi Sleeve For Shaft Repair | Fillet Radius ra:0.30 mm; D:19.0000 mm; Basic Static Radial Load Rating Co:950 N; Accessories:One Seal; B:6.00 mm; Basic Dynamic Radial Load Rating C:2210 N; d:6.000 mm; Oil Speed Rating Open/Shielded n2:43000 rpm; Grease Speed Rating Open/Shielded n1:36000 rpm; Sealed Speed Rating n3:26000 rpm; |
| AH318 Withdrawal Sleeve 85x90x53mm | Basic Static Radial Load Rating Co:1370 N; B:11.99 mm; Basic Dynamic Radial Load Rating C:3250 N; Sealed Speed Rating n3:23000 rpm; Oil Speed Rating Open/Shielded n2:43000 rpm; Accessories:Synthetic Rubber Sea; d:8.000 mm; D:22.0000 mm; Grease Speed Rating Open/Shielded n1:36000 rpm; Fillet Radius ra:0.30 mm; |
| AH216 Withdrawal Sleeve 75x80x35.5mm | F:25 mm; d:20 mm; B:20 mm; Mass inner ring:0.028 kg; r, r1,2 min.:0.3 mm; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
FTRB100135 Thrust Bearing Ring / Thrust Needle Bearing Washer 100x135x1.5mm Video