| No. | Brand | J | F | f | T | A | s | S | r |
| MVH1-300-F-K-2025 | YUKEN | - | - | - | - | - | - | - | - |
| 6304-2RS | SKF | - | - | - | - | - | - | - | - |
| 60B-2 | - | - | - | - | - | - | - | - | - |
| 271418 | - | - | - | - | - | - | - | - | - |
| 62/22 | koyo | - | - | - | - | - | - | - | - |
| 22315K | koyo | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| PHV-1B | INA | - | - | - | - | - | - | - | - |
| 1971-1976 | Timken | - | - | - | - | - | - | - | - |
| 180 | - | - | - | - | - | - | - | - | - |
| [5 | - | - | - | - | - | - | - | - | - |
| 1100 | NTN | - | - | - | - | - | - | - | - |
| Mg15g1.2 | - | - | - | - | - | - | - | - | - |
| 151f0103 | Danfoss | - | - | - | - | - | - | - | - |
| 1214K | fag | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 22256EMB | INA | - | - | - | - | - | - | - | - |
| 3659 | Timken | - | - | - | - | - | - | - | - |
| 43 | - | - | - | - | - | - | - | - | - |
| [50pcs] | - | - | - | - | - | - | - | - | - |
| 24136-BE-XL | - | - | - | - | - | - | - | - | - |
| YF0-81530-62-03 | - | - | - | - | 279.4 mm | - | - | - | - |
| 15mm | - | - | - | - | - | - | - | - | - |
| 4BDS1 | - | - | - | - | - | - | - | - | - |
| 7211BTVR | fag | - | - | - | - | - | - | - | - |
| 23128E1AXLMC4 | fag | - | - | - | - | - | - | - | - |
| CL2B-KB106 | - | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| FTRA6085 Thrust Bearing Ring / Thrust Needle Bearing Washer 60x85x1mm | Grease Speed Rating n1:5300 rpm; B:28.00 mm; Oil Speed Rating n2:6300 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:17000 N; d:60.000 mm; D:110.0000 mm; Basic Dynamic Radial Load Rating C:48800 N; |
| TMAS 100 Machinery Shim Kit | Clearance:Standard; Fatigue Load Rating (kN):3.9; Dynamic Load Rating (kN):127; Static Load Rating (kN):98; B:35mm; Limiting Speed Rating (r/min):5600; D:150mm; Availability:In Stock; Weight:0.02 KGS; d:70mm; |
| AHX311 Withdrawal Sleeve (1311EK Bearing) | P180°:60.9 kN; H2:50.8 mm; Adapter sleeve assembly:SNW 22x4; Bearing limiting speed:4300 r/min; da:101.6 mm; J1:69.85 mm; Stabilizing ring:2 x SR-1522; Cap bolt, SAE grade:5; Cap bolt recommended tightening torque:203.4 N·m; PG:1/4 NPT; |
| CR99076 Stainless Steel Speedi Sleeve For Shaft Repair | Clearance:Standard; Weight:0.02 KGS; Cage Type:Steel; D:75mm; Grease Limiting Speed (r/min):4800; Seals or Shields:Open Type; Static Load Rating (kN):76.5; d:45mm; Dynamic Load Rating (kN):57.5; SKU:32009xa-ntn; |
| 99313 / CR99313 Stainless Speedi Sleeve For Shaft Repair | l7 min.:55 mm; d2 max.:104 mm; l5 ≈:30 mm; w:55 mm; h1:145 mm; Basic static load rating C0:224 kN; r1 min.:0.6 mm; dk:60 mm; α:7 °; Specific dynamic load factor K:100 N/mm²; |
| FTRA100135 Thrust Bearing Ring / Thrust Needle Bearing Washer 100x135x1mm | Limiting speed:30000 r/min; ra max.:1 mm; Reference speed:17000 r/min; F:26.5 mm; D:47 mm; B:14 mm; d:20 mm; Basic static load rating C0:22 kN; db min.:31 mm; Basic dynamic load rating C:28.5 kN; |
| TMDT 2-38 Wire Probe | Fatigue Load Rating (kN):6000; Seals or Shields:Open Type; Availability:In Stock; Clearance:Standard; SKU:51117-fag; Cage Type:Steel; D:110mm; d:85mm; B:19mm; Dynamic Load Rating (kN):45.5; |
| TMAS 340 Machinery Shim Kit | Clearance:Standard; Preload:Light; Dynamic Load Rating (kN):5.6; Grease Limiting Speed (r/min):50000; B:8mm; Availability:In Stock; Weight:0.02 KGS; d:12mm; Cage Type:Plastic; Seals or Shields:Open Type; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
FTRA85110 Thrust Bearing Ring / Thrust Needle Bearing Washer 85x110x1mm Video