| No. | Brand | J | F | f | T | A | s | S | r |
| Sg02 | - | - | - | - | - | - | - | - | - |
| 900 | NTN | - | - | - | - | - | - | - | - |
| HCS71906E.T.P4S | - | - | - | - | - | - | - | - | - |
| 2x | TRW | - | - | - | - | - | - | - | - |
| HP22 | Danfoss | - | - | - | - | - | - | - | - |
| 50W/100W/150W/200W | - | - | - | - | - | - | - | - | - |
| 23076 | - | - | - | - | - | - | - | - | - |
| 220g | INA | - | - | - | - | - | - | - | - |
| LS180 | - | - | - | - | - | - | - | - | - |
| 880TAB | - | - | - | - | - | - | - | - | - |
| GSX400 | - | - | - | - | - | - | - | - | - |
| 4x8 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 4RSR12VM+220L | thk | - | - | - | - | - | - | - | - |
| 23080CCK/W33 | - | - | - | - | - | - | - | - | - |
| SR45TB1SS | thk | - | - | - | - | - | - | - | - |
| 634 | - | - | - | - | - | - | - | - | - |
| 020.40.1800 | - | - | - | - | - | - | - | - | - |
| 25mm | - | - | - | - | - | - | - | - | - |
| 6018ZZE | Nachi | - | - | - | - | - | - | - | - |
| 7007CSN24TRV1VS-01 | NSK | - | - | - | - | - | - | - | - |
| F628ZZ | - | - | - | - | - | - | - | - | - |
| 89946 / CR89946 Stainless Speedi Sleeve For Shaft Repair | Static Load Rating (kN):60; Weight:3.00 KGS; Seals or Shields:Two Rubber Seals; SKU:62314-2rs1-skf; Cage Type:Steel; D:140mm; Limiting Speed Rating (r/min):3200; Availability:In Stock; B:48mm; Fatigue Load Rating (kN):2.5; |
| AOH30/800 (230/800CAK/W33, C30/800KMB, C30/800K, 230/800CAK, 230/800CCK Bearing Withdrawal Sleeve) | r3,4 min.:4 mm; Basic dynamic load rating C:1427 kN; D:320 mm; Calculation factor Y2:1.2; rc max.:1.5 mm; d:150 mm; Calculation factor Y1:0.81; K:15 mm; Da min.:251 mm; Fatigue load limit Pu:200 kN; |
| AS85110 Thrust Needle Roller Bearing Washer 85x110x1mm | r3,4 min.:1.5 mm; B:22 mm; a:21.531 mm; ra max.:2 mm; Calculation factor Y0:0.8; Calculation factor Y:1.5; d:60 mm; Basic dynamic load rating C:120 kN; Fatigue load limit Pu:13.2 kN; Da max.:101.5 mm; |
| CR99819 Stainless Steel Speedi Sleeve For Shaft Repair | Housing:SAFS 217; L:330.2 mm; H2:38.1 mm; Bearing:22217 E; Lock washer:W 17; dc:80.963 mm; PG:1/8 NPT; P150°:26.7 kN; P120°:28.9 kN; Stabilizing ring:SR-17-14; |
| 87196 / CR87196 Stainless Speedi Sleeve For Shaft Repair | Fatigue load limit Pu:800 kN; Thrust factor K:1.07; Basic dynamic load rating C:4650 kN; T:279.4 mm; Design variant/feature:TQOSN/GWSI; r3,4 min.:3.3 mm; Mass bearing:191 kg; Basic static load rating C0:10000 kN; Calculation factor Y1:1.25; D1 ≈:517 mm; |
| AOHX30/560 (230/560CAK/W33, C30/560KM, 230/560CAK, 230/560CCK Bearing Withdrawal Sleeve) | Da max.:50.4 mm; Reference grease quantity Gref:1.7 cm³; Calculation factor (single, tandem) Y2:0.87; Calculation factor (back-to-back, face-to-face) Y2:1.41; Number of balls z:17; Static axial stiffness, preload class A:79 N/µm; Preload class A GA:80 N; Calculation factor (back-to-back, face-to-face) Y1:0.92; rb max.:0.6 mm; da min.:34.6 mm; |
| 90221 / CR90221 Stainless Speedi Sleeve For Shaft Repair | B:31mm; Clearance:C4; Availability:In Stock; Static Load Rating (kN):232; d:70mm; D:125mm; Weight:1.58 KGS; Grease Limiting Speed (r/min):3600; Oil Limiting Speed (r/min):4500; Cage Type:Steel; |
| MSR26x1.5 Precision Locknut / MSR-M26x1.5 Locking Nut (M26x1.5)x45x20mm | d:6.400 mm; Basic Dynamic Radial Load Rating C:1480 N; Oil Speed Rating Open/Shielded n2:54000 rpm; Shielded or Sealed B1:5.0 mm; D:15.9000 mm; Basic Static Radial Load Rating Co:620 N; Accessories:Two Shields; Width Plain B:5.0 mm; Sealed Speed Rating n3:31000 rpm; Fillet Radius ra:0.30 mm; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
FTRA80105 Thrust Bearing Ring / Thrust Needle Bearing Washer 80x105x1mm Video