| No. | Brand | J | F | f | T | A | s | S | r |
| 4.8mm | - | - | - | - | - | - | - | - | - |
| 45% | - | - | - | - | - | - | - | 4.763 mm | - |
| sae4130 | - | - | - | - | - | - | - | - | - |
| 2.0mm | - | - | - | - | - | - | - | - | - |
| MVH1-300-F-K-2025 | YUKEN | - | - | - | - | - | - | - | - |
| LM301H | - | - | - | - | - | - | - | - | - |
| 30W-150W | - | - | - | - | - | - | - | - | - |
| LH24D | RBC | - | - | - | - | - | - | - | - |
| CAS108-80-5 | - | - | - | - | - | - | - | - | - |
| 8*10W | - | - | - | - | 400.05 mm | - | - | - | - |
| T73T-1217 | - | - | - | - | - | - | - | - | - |
| (Zhv1) | - | - | - | - | - | - | - | - | - |
| 5m | - | - | - | - | - | - | - | - | - |
| OMR-160 | - | - | - | - | - | 12 mm | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 608ZZ | Rollway | - | - | - | - | - | - | - | - |
| 23996YMB | INA | - | - | - | - | - | - | - | - |
| 20.5% | - | - | - | - | - | - | - | - | - |
| 32222 | fag | - | - | - | - | - | - | - | - |
| 513052 | Timken | - | - | - | - | - | - | - | - |
| 15mm | INA | - | - | - | - | - | - | - | - |
| 99395 / CR99395 Stainless Speedi Sleeve For Shaft Repair | Weight:1.09 KGS; Static Load Rating (kN):49; D:120mm; Clearance:Standard; Dynamic Load Rating (kN):61; Limiting Speed Rating (r/min):9500; Availability:In Stock; Seals or Shields:Open Type; Cage Type:Brass; Fatigue Load Rating (kN):3.55; |
| CPR81207 Thrust Plate 35x62x5.25mm | Basic Dynamic Radial Load Rating C:325000 N; Basic Static Radial Load Rating Co:560000 N; d:480.000 mm; B:56.00 mm; D:600.0000 mm; Accessories:Without Accessories; Grease Speed Rating Open/Shielded n1:850 rpm; Sealed Speed Rating n3:0 rpm; Oil Speed Rating Open/Shielded n2:1000 rpm; Fillet Radius ra:2.50 mm; |
| 99721 / CR99721 Stainless Speedi Sleeve For Shaft Repair | B:53mm; Cage Type:Brass; Seals or Shields:Open Type; SKU:23028-e1a-k-m-c3-qbl; Weight:0.02 KGS; Availability:In Stock; d:140mm; Clearance:C3; D:210mm; |
| Cylindrical Roller Bearings NU336-E-XL-TVP2 180x380x75mm | Da:289.999 mm; Eye bolt:2 x 3/8-16 UNC; Cap bolt, SAE grade:5; PG:1/4 NPT; L:558.8 mm; J max.:488.95 mm; J min.:441.325 mm; Cap bolt:4 x 3/4-10 UNC; P60°:226 kN; Max. speed for Taconite seal:560 r/min; |
| AH3172H Withdrawal Sleeve Supplier | B:53.975mm; Weight:4.70 KGS; Availability:In Stock; Static Load Rating (kN):523; Dynamic Load Rating (kN):439; D:161.925mm; d:88.9mm; SKU:set-124-qbl; |
| AOH31/950 (231/950CAK/W33, 231/950CAK, 231/950CCK, 231/950CCK/W33 Bearing Withdrawal Sleeve) | Accessories:Chain Sheave Type- 3; Basic Interchange NSK:-; Basic Interchange SPLIT:-; Basic Interchange BCA:-; Basic Interchange NDH:-; Basic Interchange MCGILL:-; Basic Interchange:-; Basic Radial Load Rating-Dynamic DC:19600 lbf; Basic Radial Load Rating-Static SCO:77600 lbf; |
| 86798 / CR86798 Stainless Speedi Sleeve For Shaft Repair | Accessories:One Seal; d:280.000 mm; Basic Static Radial Load Rating Co:285000 N; Grease Speed Rating Open/Shielded n1:1500 rpm; Sealed Speed Rating n3:950 rpm; Oil Speed Rating Open/Shielded n2:1800 rpm; B:46.00 mm; Fillet Radius ra:2.00 mm; D:380.0000 mm; Basic Dynamic Radial Load Rating C:216000 N; |
| 99870 / CR99870 Stainless Speedi Sleeve For Shaft Repair | J:152.4 mm; a:6.35 mm; Attachment bolt diameter G:19.05 mm; L:193.675 mm; A:69.85 mm; d2:111.125 mm; A1:98.425 mm; Mass bearing unit:12.3 kg; s:31.75 mm; da:74.612 mm; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
FTRB75100 Thrust Bearing Ring / Thrust Needle Bearing Washer 75x100x1.5mm Video