| No. | Brand | J | F | f | T | A | s | S | r |
| 24V | - | - | - | - | - | - | - | - | - |
| 12V | - | - | - | - | - | - | - | - | - |
| MB-991045 | - | - | - | - | - | - | - | - | - |
| 1903120800 | INA | - | - | - | - | - | - | - | - |
| 2500W | - | - | - | - | - | - | - | - | - |
| 5202-2NSL | Nachi | - | - | - | - | - | - | - | - |
| 63B | - | - | - | - | - | - | - | - | - |
| RS25 | - | - | - | - | - | - | - | - | - |
| 4T-LM48548 | Bower | - | - | - | - | - | - | - | - |
| 15mm | INA | - | - | - | - | - | - | - | - |
| CL2B-KB106 | - | - | - | - | - | - | - | - | - |
| 5W | - | - | - | - | - | - | - | - | - |
| 18 | - | - | - | - | - | - | - | - | - |
| Cooker(XF-8562-A) | - | - | - | - | - | - | - | - | - |
| WB000025 | Timken | - | - | - | - | - | - | - | - |
| 20-5-52/100ym | Rexroth | - | - | - | - | - | - | - | - |
| 6309 | - | - | - | - | - | - | - | - | - |
| SC150 | - | - | - | - | - | - | - | - | - |
| 43 | - | - | - | - | - | - | - | - | - |
| 10-10-30 | - | - | - | - | - | - | - | - | - |
| 314NPP | FAFNIR | - | - | - | - | - | - | - | - |
| 150lm/W | - | - | - | - | - | - | - | - | - |
| 5/10/20 | - | 47.6 mm | - | - | - | - | - | - | - |
| TCR2 | - | - | - | - | - | - | - | - | - |
| 25% | - | - | - | - | - | - | - | - | - |
| 32222 | fag | - | - | - | - | - | - | - | - |
| 87623 / CR87623 Stainless Speedi Sleeve For Shaft Repair | Calculation factor e:0.33; Basic static load rating C0:2900 kN; D1 ≈:351 mm; Calculation factor Y0:2; Reference speed:1200 r/min; Mass bearing + sleeve:100 kg; d2 ≈:249 mm; d1:190 mm; B2 ≈:177 mm; Da max.:400 mm; |
| ZM90 Precision Locknut (M90x2)x120x20mm | Cage Type:Steel; B:174mm; D:480mm; Weight:135.80 KGS; SKU:23252kejw507c08c2-ti; Reference Speed Rating (r/min):710; Static Load Rating (kN):4850; Availability:In Stock; Dynamic Load Rating (kN):3510; Limiting Speed Rating (r/min):650; |
| AH24128 Withdrawal Sleeve(matched Bearing:24128CCK30/W33, C4128K30V) | Cage Type:Plastic; d:20mm; Speed Rating (r/min):58680; B:12mm; D:42mm; Dynamic Load Rating (kN):3.33; Weight:0.06 KGS; SKU:2mmvc9104hxcrdul-tim; Availability:In Stock; Seals or Shields:Open Type; |
| CR99083 Stainless Steel Speedi Sleeve For Shaft Repair | Clearance:Standard; Fatigue Load Rating (kN):10.8; Availability:In Stock; Limiting Speed Rating (r/min):2000; Cage Type:Steel; SKU:bs2-2209-2rsk/vt143-; D:85mm; Dynamic Load Rating (kN):102; Seals or Shields:Two Rubber Seals; d:45mm; |
| TRC613 Thrust Bearing Ring / Thrust Needle Bearing Washer 9.525x20.625x2.4mm | Fatigue Load Rating (kN):0.55; Limiting Speed Rating (r/min):16100; SKU:6007-c3-fag; Weight:0.02 KGS; Reference Speed Rating (r/min):11600; Seals or Shields:Open Type; B:14mm; Cage Type:Steel; Dynamic Load Rating (kN):17; d:35mm; |
| 87911 / CR87911 Stainless Speedi Sleeve For Shaft Repair | d1:131.762 mm; Lock nut:AN 30; Hydraulic nut:HMVC 30E; B4:28.575 mm; Threads per inch:12; Mass adapter sleeve assembly:7.25 kg; B1:107.467 mm; d:150 mm; Sleeve:S 30x5.3/16; Lock washer:W 30; |
| 86600 / CR86600 Stainless Speedi Sleeve For Shaft Repair | Accessories:One Shield & Snap-Ri; B:21.00 mm; d:25.000 mm; Grease Speed Rating Open/Shielded n1:9000 rpm; Basic Static Radial Load Rating Co:19300 N; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:35800 N; Oil Speed Rating Open/Shielded n2:11000 rpm; D:80.0000 mm; Sealed Speed Rating n3:6400 rpm; |
| TRE411 Thrust Bearing Ring / Thrust Needle Bearing Washer 6.35x17.45x4mm | Static Load Rating (kN):2; Clearance:C3; D:26mm; Seals or Shields:Single Metal Shield; Weight:0.02 KGS; Availability:In Stock; Limiting Speed Rating (r/min):26000; Reference Speed Rating (r/min):38000; d:10mm; SKU:6000zc3-timken; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
FTRC7095 Thrust Bearing Ring / Thrust Needle Bearing Washer 70x95x2mm Video