| No. | Brand | J | F | f | T | A | s | S | r |
| r404063451 | Rexroth | - | - | - | - | - | - | - | - |
| 100W | - | - | - | - | - | - | - | - | - |
| 1250*2500 | - | - | - | - | - | - | - | 4.763 mm | - |
| 2x | - | - | - | - | - | - | - | - | - |
| 20x27x4mm | - | - | - | - | - | - | - | - | - |
| 650 | fag | - | - | - | - | - | - | - | - |
| 2015 | - | - | - | - | - | - | - | - | - |
| 2835 | - | - | - | - | - | - | - | - | - |
| EX270-5 | - | - | - | - | - | - | - | - | - |
| 6202-2RS | - | - | - | - | - | - | - | - | - |
| 30W-150W | - | - | - | - | - | - | - | - | - |
| 14 | - | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| N311 | NSK | - | - | - | - | - | - | - | - |
| 86 | SKF | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| BDZ-155 | - | - | - | - | - | - | - | - | - |
| 1U1779 | - | - | - | - | - | - | - | - | - |
| 026-67063-0 | Parker | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| NU2316 | - | - | - | 8 mm | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 018/020/045/050/057/063/074/081/098/106/131/141 | - | - | - | - | - | - | - | - | - |
| 3232 | SKF | - | - | - | - | - | - | - | - |
| AH30/530 Withdrawal Sleeve 500x530x242mm | B:33mm; Dynamic Load Rating (kN):236; Cage Type:Steel; Reference Speed Rating (r/min):4300; SKU:21313e-skf; d:65mm; Weight:0.02 KGS; Availability:In Stock; Static Load Rating (kN):270; D:140mm; |
| 86973 / CR86973 Stainless Speedi Sleeve For Shaft Repair | Preload class B GB:130 N; Mass bearing:0.074 kg; Preload class A GA:45 N; rb max.:0.3 mm; Static axial stiffness, preload class C:50 N/µm; Calculation factor f1:1; Calculation factor f2A:1; Db max.:44.6 mm; Da max.:43.8 mm; Preload class C GC:260 N; |
| 90805 / CR90805 Stainless Speedi Sleeve For Shaft Repair | D:480 mm; d:360 mm; Axial load factor Y:0.6; Da max.:465 mm; db min.:392 mm; Basic static load rating C0:1460 kN; Calculation factor kr:0.1; Limiting speed:2000 r/min; D1 ≈:438 mm; Reference speed:1400 r/min; |
| TMDT 2-31 Magnetic Surface Probe | Clearance:C3; SKU:23140kembw33c3-timke; Reference Speed Rating (r/min):1400; B:112mm; Weight:40.70 KGS; d:200mm; D:340mm; Dynamic Load Rating (kN):1660; Static Load Rating (kN):2290; Availability:In Stock; |
| CPR15160270 Thrust Plate 160x270x15mm | Fatigue load limit Pu:1930 kN; D1:1066 mm; Reference speed:120 r/min; ra max.:4 mm; r1,2 min.:5 mm; Da max.:1095 mm; B:45 mm; D:1250 mm; Limiting speed:240 r/min; Basic static load rating C0:36500 kN; |
| CR99818 Stainless Steel Speedi Sleeve For Shaft Repair | B:26 mm; G:M 170x3; B1:101 mm; d3:200 mm; Mass adapter sleeve assembly:5.7 kg; Hydraulic nut:HMV 34 E; B4:28.5 mm; Locking device:MBL 34; d1:150.813 mm; Lock nut:KML 34; |
| FTRD1024 Thrust Bearing Ring / Thrust Needle Bearing Washer 10x24x2.5mm | SKU:7201ctrsulp3-nsk; d:12mm; Grease Limiting Speed (r/min):52300; Weight:0.02 KGS; Static Load Rating (kN):3.85; Availability:In Stock; Preload:Light; Dynamic Load Rating (kN):7.9; Cage Type:Plastic; D:32mm; |
| CR170x200x15HMSA10 RG Shaft Oil Seal 170x200x15mm | D:100mm; Cage Type:Brass; B:36mm; d:45mm; SKU:22309emw33w800c4-tim; Availability:In Stock; Limiting Speed Rating (r/min):5100; Dynamic Load Rating (kN):180; Static Load Rating (kN):169; Clearance:C4; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
FTRC6085 Thrust Bearing Ring / Thrust Needle Bearing Washer 60x85x2mm Video