| No. | Brand | J | F | f | T | A | s | S | r |
| F636ZZ | - | - | - | - | - | - | - | - | - |
| 60% | - | - | - | - | - | - | - | - | - |
| GNX250 | - | - | - | - | - | - | - | - | - |
| 800 | NTN | - | - | - | - | - | - | - | - |
| 595 | - | - | - | - | - | - | - | - | - |
| 180 | - | - | - | - | - | - | - | - | - |
| 1160X2400X28mm | - | - | - | - | - | - | - | - | - |
| 4x8 | - | - | - | - | - | - | - | - | - |
| 30mm | - | - | - | - | - | - | - | - | - |
| 99.5% | - | - | - | - | - | - | - | - | - |
| NCF3006CV | SKF | - | - | - | - | - | - | - | - |
| NNU4940/W33 | INA | - | - | - | - | - | - | - | - |
| P117FS21R | Rexroth | - | - | - | - | - | - | - | - |
| FZX750 | - | - | - | - | - | - | - | - | - |
| 412 | NSK | 96 mm | - | - | - | 32 mm | - | - | - |
| N211W | NSK | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 4TNV98 | - | - | - | - | - | - | - | - | - |
| 4X8 | - | - | - | - | - | - | - | - | - |
| (10) | - | - | - | - | - | - | - | - | - |
| 1000 | NTN | 92 mm | - | - | - | 35 mm | - | - | - |
| 5/2 | - | - | - | - | - | - | - | - | - |
| WR125 | - | - | - | - | - | - | - | - | - |
| 21% | - | - | - | - | - | - | - | - | - |
| SK135SR | - | - | - | - | - | - | - | - | - |
| 30W | - | - | - | - | - | - | - | - | - |
| (25 | - | - | - | - | - | - | - | - | - |
| SK210LC-8 | INA | - | - | - | - | - | - | - | - |
| CP5070 Thrust Plate 50x69.4x0.8mm | D:62mm; Weight:0.02 KGS; SKU:1206j-qbl; Seals or Shields:Open Type; Clearance:Standard; B:16mm; Availability:In Stock; d:30mm; Cage Type:Steel; |
| 99289 / CR99289 Stainless Speedi Sleeve For Shaft Repair | D:14mm; Clearance:Standard; Weight:0.20 KGS; Seals or Shields:Two Rubber Seals; SKU:s687-2rs-zen; Availability:In Stock; d:7mm; Cage Type:Steel; B:5mm; |
| CR99122 Stainless Steel Speedi Sleeve For Shaft Repair | D:120mm; Static Load Rating (kN):41.5; B:23mm; d:65mm; Dynamic Load Rating (kN):60; Limiting Speed Rating (r/min):13000; Weight:1.00 KGS; Availability:In Stock; Reference Speed Rating (r/min):6300; Clearance:Standard; |
| AOH240/1000 (240/1000CAK, 240/1000CCK, 240/1000CCK/W33,240/1000CAK30F/W33 Bearing Withdrawal Sleeve) | Fatigue Load Rating (kN):--; Seals or Shields:Non-Contact Seal; Availability:In Stock; Cage Type:Steel; Reference Speed Rating (r/min):--; Limiting Speed Rating (r/min):10000; d:20mm; Static Load Rating (kN):7.9; Dynamic Load Rating (kN):15.9; B:15mm; |
| 99315 / CR99315 Stainless Speedi Sleeve For Shaft Repair | Static Load Rating (kN):2.85; SKU:6002-2rsh/c3gjn-skf; Weight:0.02 KGS; Cage Type:Steel; Limiting Speed Rating (r/min):15000; D:32mm; Seals or Shields:Two Rubber Seals; Condition:New; B:9mm; Clearance:C3; |
| HMV36E / HMV 36E Hydraulic Nut (M180x3)x256x48mm | Basic Dynamic Radial Load Rating C:138000 N; Fillet Radius ra:2.10 mm; B:58.70 mm; Basic Static Radial Load Rating Co:122000 N; Grease Speed Rating n1:3200 rpm; Oil Speed Rating n2:4300 rpm; d:65.000 mm; D:140.0000 mm; |
| 85885 / CR85885 Stainless Speedi Sleeve For Shaft Repair | s:19.5 mm; d:25 mm; H1:46 mm; D2:45 mm; Minimum load factor A:0.026; rb max.:0.3 mm; H:41.3 mm; C:7 mm; Fatigue load limit Pu:2.4 kN; D1 ≈:32 mm; |
| CR99272 Stainless Steel Speedi Sleeve For Shaft Repair | Mass bushing:0.16 kg; Effective load carrying cross section A:4930 mm²; Permissible sliding velocity v max.:0.5 m/s; d:85 mm; Tolerance shaft:h8; D:95 mm; Tolerance housing:H7; Permissible sliding velocity v min.:0 m/s; Specific dynamic load factor K:140 N/mm²; Specific static load factor K0:200 N/mm²; |
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
FTRA5070 Thrust Bearing Ring / Thrust Needle Bearing Washer 50x70x1mm Video