| No. | Brand | J | F | f | T | A | s | S | r |
| 10pcs | - | - | - | - | - | - | - | - | - |
| A11VO | Rexroth | - | - | - | - | - | - | 3.175 mm | - |
| 1100X1100 | - | - | - | - | - | - | - | - | - |
| PV24 | - | - | - | - | - | - | - | - | - |
| 280mm | - | - | - | - | - | - | - | - | - |
| R901008343 | Rexroth | - | - | - | - | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| 24136-BE-XL | - | - | - | - | - | - | - | - | - |
| 99-05 | koyo | - | - | - | - | - | - | - | - |
| 50 | - | - | - | - | - | - | - | - | - |
| AP2D36 | - | - | - | - | - | - | - | - | - |
| 750 | - | - | - | - | - | - | - | - | - |
| 32209/Q | SKF | - | - | - | - | - | - | - | - |
| 4X8 | INA | - | - | - | - | - | - | - | - |
| 22314CDE4 | NSK | - | - | - | - | - | - | - | - |
| 3-19mm | - | - | - | - | - | - | - | - | - |
| 16-16-16 | - | - | - | - | - | - | - | - | - |
| 4X8 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 98%Min | - | - | - | - | - | - | - | - | - |
| 12 | - | - | - | - | - | - | - | - | - |
| 9o-1b20-0223-0547-1 | - | - | - | - | - | - | - | - | - |
| 20.5% | - | - | - | - | - | - | - | - | - |
| J-8360-7 | - | - | - | - | - | - | - | - | - |
| 6.5kg | - | - | - | - | - | - | - | - | - |
| 5W | - | - | - | - | - | - | - | - | - |
| 2006 | - | - | - | - | - | - | - | - | - |
| 9mm/12mm/15mm/18mm | - | - | - | - | - | - | - | - | - |
| LAGF 50 Grease Filler Pump | Limiting Speed Rating (r/min):3200; Seals or Shields:Open Type; Weight:4.20 KGS; d:95mm; Reference Speed Rating (r/min):3900; Static Load Rating (kN):441; D:170mm; Clearance:C4; Cage Type:Steel; B:43mm; |
| AS0515 Thrust Needle Roller Bearing Washer 5x15x1mm | Basic Static Radial Load Rating Co:34000 N; d:40.000 mm; Basic Dynamic Radial Load Rating C:44900 N; B:30.20 mm; Sealed Speed Rating n3:5600 rpm; Accessories:One Shield & Snap-Ri; Grease Speed Rating n1:5600 rpm; Oil Speed Rating n2:7500 rpm; Fillet Radius ra:1.00 mm; D:80.0000 mm; |
| CP2917 Thrust Plate 9x16.4x2mm | H2:45 mm; H:242 mm; L:410 mm; P0°:600 kN; P55°:680 kN; A2:195 mm; P90°:410 kN; A1:120 mm; Da:200 mm; Mass housing:22 kg; |
| CR99272 Stainless Steel Speedi Sleeve For Shaft Repair | Mass bushing:0.16 kg; Effective load carrying cross section A:4930 mm²; Permissible sliding velocity v max.:0.5 m/s; d:85 mm; Tolerance shaft:h8; D:95 mm; Tolerance housing:H7; Permissible sliding velocity v min.:0 m/s; Specific dynamic load factor K:140 N/mm²; Specific static load factor K0:200 N/mm²; |
| EAZ 190 Induction Heater | Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:340000 N; Fillet Radius rb:1.00 mm; Grease Speed Rating n1:1900 rpm; D:230.0000 mm; B:56.00 mm; Oil Speed Rating n2:2400 rpm; d:170.000 mm; Basic Dynamic Radial Load Rating C:216000 N; |
| AH3052 Withdrawal Sleeve 240x260x128mm | d:55.000 mm; Grease Speed Rating n1:3200 rpm; Fillet Radius rb:1.00 mm; Basic Static Radial Load Rating Co:153000 N; D:140.0000 mm; B:66.00 mm; Fillet Radius ra:2.00 mm; Oil Speed Rating n2:5600 rpm; Basic Dynamic Radial Load Rating C:182000 N; |
| FTRB90120 Thrust Bearing Ring / Thrust Needle Bearing Washer 90x120x1.5mm | Availability:In Stock; SKU:22234cde4c3-nsk; B:86mm; d:170mm; Dynamic Load Rating (kN):990; D:310mm; Grease Limiting Speed (r/min):1100; Oil Limiting Speed (r/min):1400; Seals or Shields:Open Type; Cage Type:Steel; |
| CR99166 Stainless Steel Speedi Sleeve For Shaft Repair | Clearance:Standard; SKU:3205a-2rs1/mt33-skf; Availability:In Stock; d:25mm; Weight:0.02 KGS; Cage Type:Steel; D:52mm; Static Load Rating (kN):14.3; Fatigue Load Rating (kN):0.6; B:20.6mm; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
FTRC5070 Thrust Bearing Ring / Thrust Needle Bearing Washer 50x70x2mm Video