| No. | Brand | J | F | f | T | A | s | S | r |
| 5 | - | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| NJ209EM | Rollway | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| NU2222 | NSK | - | - | - | - | - | - | - | - |
| 12mm/16mm/17mm/18mm | - | - | - | - | - | - | - | - | - |
| R165149420 | Rexroth | - | - | - | - | - | - | - | - |
| 8'1" | - | - | - | - | - | - | - | - | - |
| Lt110 | - | - | - | - | - | - | - | - | - |
| 3m | - | - | - | - | - | - | - | - | - |
| 120 | - | - | - | - | - | - | - | - | - |
| AM119683 | John Deere | - | - | - | - | - | - | - | - |
| 12125-02-9 | - | - | - | - | - | - | - | - | - |
| 36-Clips | - | - | - | - | - | - | - | - | - |
| UC209D1 | NSK | - | - | - | - | - | - | - | - |
| 1216 | - | - | - | - | - | - | - | - | - |
| 301b | - | - | - | - | - | - | - | - | - |
| 8301-023-OMR | Parker | - | - | - | - | - | - | - | - |
| (LCC-1007) | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 960 | - | - | - | - | - | - | - | - | - |
| 23217 | - | - | - | - | - | - | - | - | - |
| [10Pc] | - | - | - | - | - | - | - | - | - |
| A4VG | Rexroth | - | - | - | - | - | - | - | - |
| YZF-R6 | - | - | - | - | - | - | - | - | - |
| 1pcs | - | - | - | - | - | - | - | - | - |
| A4VG125 | Rexroth | - | - | - | - | - | - | - | - |
| 41100870 | Parker | - | - | - | - | - | - | - | - |
| 20152 | - | - | - | - | - | - | - | - | - |
| 3/8" | Parker | - | - | - | 98 mm | - | - | - | - |
| CR99812 Stainless Steel Speedi Sleeve For Shaft Repair | Calculation factor f2D:1.08; Static axial stiffness, preload class B:219 N/µm; Static axial stiffness, preload class D:393 N/µm; Number of balls z:19; d1:70.8 mm; Preload class C GC:960 N; d:60 mm; a:27.2 mm; rb max.:0.6 mm; r3,4 min.:0.6 mm; |
| AHX2314G Withdrawal Sleeve(matched Bearing:22314EK, C2314K) | Availability:In Stock; Cage Type:Steel; Dynamic Load Rating (kN):90; Fatigue Load Rating (kN):2.75; d:50mm; SKU:3310a-2rs1/c3mt33-sk; B:44.4mm; Static Load Rating (kN):64; Seals or Shields:Two Rubber Seals; Limiting Speed Rating (r/min):4300; |
| TRD3244 Thrust Bearing Ring / Thrust Needle Bearing Washer 50.8x69.85x3.2mm | H1:125 mm; Adapter sleeve:H 322 E; da:100 mm; P90°:410 kN; Appropriate attachment bolt, rec. tightening torque:665 N·m; Locating ring:2 x FRB 13,5/200; Pa:220 kN; N1:26 mm; Q120°:620 kN; Cap bolt, rec. tightening torque:200 N·m; |
| HMV46E / HMV 46E Hydraulic Nut 232x318x53mm | B:12.5 mm; Mass inner ring:0.0052 kg; F:13 mm; d:10 mm; r, r1,2 min.:0.3 mm; |
| 81390 / CR81390 Stainless Speedi Sleeve For Shaft Repair | Weight:0.01 KGS; Limiting Speed Rating (r/min):34000; D:19mm; d:10mm; Clearance:Standard; Cage Type:Steel; Seals or Shields:Two Rubber Seals; SKU:618002rs-timken; B:5mm; Static Load Rating (kN):0.84; |
| EAZ 246 Induction Heater | Clearance:Standard; Seals or Shields:Two Rubber Seals; Limiting Speed Rating (r/min):30000; Cage Type:Plastic; d:65mm; Static Load Rating (kN):150.6; SKU:s7013cega/p4a-skf; Availability:In Stock; Weight:0.43 KGS; Dynamic Load Rating (kN):20.3; |
| HMV77E / HMV 77E Hydraulic Nut 387x504x69mm | Oil Limiting Speed (r/min):3400; Availability:In Stock; Weight:3.48 KGS; Grease Limiting Speed (r/min):2800; B:33mm; Cage Type:Steel; D:210mm; Static Load Rating (kN):109; SKU:6028zz-nsk; Clearance:Standard; |
| EAZ 202 Induction Heater | d:20mm; Weight:0.02 KGS; Seals or Shields:Open Type; B:21mm; Availability:In Stock; D:52mm; Cage Type:Brass; Clearance:C3; SKU:2304mc3-qbl; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
FTRE5070 Thrust Bearing Ring / Thrust Needle Bearing Washer 50x70x3mm Video