| No. | Brand | J | F | f | T | A | s | S | r |
| 22217-EKC3W33 | SKF | - | - | - | - | - | - | - | - |
| 5W | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 4x8x3 | - | - | - | - | - | - | - | - | - |
| 4D102 | - | - | - | - | - | - | - | - | - |
| 6way | - | - | - | - | - | - | - | - | - |
| 6410 | - | - | - | - | - | - | - | - | - |
| 300 | - | - | - | - | - | - | - | - | - |
| EX270-5 | - | - | - | - | - | - | - | - | - |
| ALL72281 | Timken | - | - | - | - | - | - | - | - |
| 2019 | - | - | 1391 mm | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 70BNR10ETYNDUELP4 | NSK | - | - | - | - | - | - | - | - |
| 1220*2440*18mm | - | - | - | - | - | - | - | - | - |
| MF85ZZ | - | - | - | - | - | - | - | - | - |
| 6306 | SKF | - | - | - | 23.812 mm | - | - | - | - |
| SHF20-XRB | - | - | - | - | - | - | - | - | - |
| GSX400 | - | - | - | - | - | - | - | - | - |
| 300W | - | - | - | - | - | - | - | - | - |
| 3528SMD/SMD | - | - | - | - | - | - | - | - | - |
| CAS12125-02-9 | - | - | - | - | - | - | - | - | - |
| 22-3/4 | - | - | - | - | - | - | - | - | - |
| 2004 | Dodge | - | - | - | - | - | - | - | - |
| VS600 | - | - | - | - | - | - | - | - | - |
| 53mm | - | - | - | - | - | - | - | - | - |
| RCTS33SA3 | koyo | - | - | - | - | - | - | - | - |
| 6*9W | - | - | - | - | - | - | - | - | - |
| 4 | - | - | - | - | - | - | - | - | - |
| 010.45.1800 | - | - | - | - | - | - | - | - | - |
| HMV36E / HMV 36E Hydraulic Nut (M180x3)x256x48mm | Basic Dynamic Radial Load Rating C:138000 N; Fillet Radius ra:2.10 mm; B:58.70 mm; Basic Static Radial Load Rating Co:122000 N; Grease Speed Rating n1:3200 rpm; Oil Speed Rating n2:4300 rpm; d:65.000 mm; D:140.0000 mm; |
| 90113 / CR90113 Stainless Speedi Sleeve For Shaft Repair | Static Load Rating (kN):61; Dynamic Load Rating (kN):48.5; Seals or Shields:Open Type; d:160mm; Grease Limiting Speed (r/min):2600; B:20mm; Availability:In Stock; Weight:1.23 KGS; D:200mm; Clearance:Standard; |
| AOH32/850 (232/850CAK/W33,232/850CAK, 232/850CCK, 232/850CCK/W33 Bearing Withdrawal Sleeve) | J1:127 mm; P180°:222 kN; da:184.15 mm; Pa:58.7 kN; P60°:557 kN; Taconite seal:TER 160; Adapter sleeve assembly:SNW 40x7.1/4; Cap bolt:1 1/4-7 UNC; S:4.763 mm; Cap bolt recommended tightening torque:2467.6 N·m; |
| AHX213 Withdrawal Sleeve 65x60x32.5mm | Mass lock washer:0.04 kg; M:57.5 mm; d1:73 mm; B:2.5 mm; f:8 mm; d2:86 mm; d:60 mm; |
| 99465 / CR 99465 Stainless Speedi Sleeve For Shaft Repair | Permissible sliding velocity v min.:0.25 m/s; D:41 mm; d:35 mm; Mass bushing:0.055 kg; Coefficient of friction µ min.:0.05; Tolerance shaft:h8; Coefficient of friction µ max.:0.1; Specific dynamic load factor K:10 N/mm²; B:25 mm; Permissible sliding velocity v max.:5 m/s; |
| VHIN 10 Bearing Induction Heater | Limiting Speed Rating (r/min):11400; Dynamic Load Rating (kN):5.1; B:10mm; SKU:s6003-2rsr-fag; Seals or Shields:Two Rubber Seals; Static Load Rating (kN):2.6; d:17mm; Clearance:Standard; D:35mm; Weight:0.04 KGS; |
| 99337 / CR99337 Stainless Speedi Sleeve For Shaft Repair | Weight:0.20 KGS; Seals or Shields:Open Type; SKU:xls8-hoffmann; d:8 Inch; D:10.75 Inch; B:1.375 Inch; Availability:In Stock; Clearance:Standard; |
| HMV106E / HMV 106E Hydraulic Nut 532x670x82mm | Weight:0.02 KGS; Seals or Shields:Two Metal Shields; Static Load Rating (kN):5; SKU:6004zznr-nsk; Fatigue Load Rating (kN):--; B:12mm; Clearance:Standard; Reference Speed Rating (r/min):--; Limiting Speed Rating (r/min):18000; Dynamic Load Rating (kN):9.4; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
FTRD3047 Thrust Bearing Ring / Thrust Needle Bearing Washer 30x47x2.5mm Video