| No. | Brand | J | F | f | T | A | s | S | r |
| 100% | - | - | - | - | - | - | - | - | - |
| 30X42X7 | - | - | - | - | - | - | - | - | - |
| NU2316 | - | - | - | 8 mm | - | - | - | - | - |
| 6251-11-3200 | - | - | - | - | - | - | - | - | - |
| 2.5mm | - | - | - | - | - | - | - | - | - |
| 21311 | NSK | - | - | - | - | - | - | - | - |
| 520 | - | - | - | - | - | - | - | - | - |
| 2015 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 2017 | - | - | - | - | - | - | - | - | - |
| 23pcs | - | - | - | - | - | - | - | - | - |
| 10W | - | - | 73 mm | - | - | - | - | - | - |
| 16X8 | - | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| 1-10pcs | - | - | - | - | - | - | - | - | - |
| PC40-8 | - | - | - | - | - | - | - | - | - |
| 4D102 | - | - | - | - | - | - | - | - | - |
| 140lm/W | - | - | - | - | - | - | - | - | - |
| L-4517 | - | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| SR-T03-1-12, | DAIKIN | - | - | - | - | - | - | - | - |
| 5202-2NSL | Nachi | - | - | - | - | - | - | - | - |
| H2312X Adapter Sleeve 55x80x62mm | B:60.3mm; Availability:In Stock; d:100mm; D:180mm; Weight:0.02 KGS; Fatigue Load Rating (kN):60; Seals or Shields:Open Type; SKU:23220-e1-tvpb-c3-fag; Dynamic Load Rating (kN):550; Cage Type:Plastic; |
| AH24130 Withdrawal Sleeve(matched Bearing:24130CCK,24130CAK, C4130K) | Dynamic Load Rating (kN):75; D:110mm; Seals or Shields:Open Type; Availability:In Stock; SKU:7310becbj-skf; Static Load Rating (kN):51; Cage Type:Steel; Reference Speed Rating (r/min):8000; B:27mm; Fatigue Load Rating (kN):2.16; |
| CR99159 Stainless Steel Speedi Sleeve For Shaft Repair | Width - Overall B:14.4 mm; d:15.000 mm; Basic Interchange BCA:88502; Fillet Radius ra:0.64 mm; Basic Radial Load Rating-Dynamic DC:7610 N; D:35.0000 mm; Basic Interchange NDH:88502; Basic Radial Load Rating-Static SCO:3750 N; Width - Inner Ring B1:14.40 mm; Width - Outer Ring B0:11.0 mm; |
| 86269 / CR86269 Stainless Speedi Sleeve For Shaft Repair | Fatigue Load Rating (kN):0.71; Reference Speed Rating (r/min):8500; Cage Type:Plastic; d:60mm; Weight:0.89 KGS; Availability:In Stock; Dynamic Load Rating (kN):30.5; Limiting Speed Rating (r/min):6700; Clearance:C3; B:22mm; |
| FTRD80105 Thrust Bearing Ring / Thrust Needle Bearing Washer 80x105x2.5mm | Basic Static Radial Load Rating Co:176000 N; Grease Speed Rating n1:2600 rpm; d:85.000 mm; Oil Speed Rating n2:3600 rpm; B:49.20 mm; Accessories:Shield & Seal; D:150.0000 mm; Sealed Speed Rating n3:2600 rpm; Basic Dynamic Radial Load Rating C:142000 N; Fillet Radius ra:2.00 mm; |
| CP8190240 Thrust Plate 190x238.3x8mm | Basic Dynamic Radial Load Rating C:153000 N; B:66.70 mm; Grease Speed Rating n1:2800 rpm; Sealed Speed Rating n3:2800 rpm; Accessories:No Shield, no Seal,; Oil Speed Rating n2:3800 rpm; D:150.0000 mm; Fillet Radius ra:2.00 mm; d:70.000 mm; Basic Static Radial Load Rating Co:125000 N; |
| TMDT 2-42 Ambient Temperature Probe | B:400.05 mm; D1 ≈:484 mm; Calculation factor Y0:2; d1 ≈:419 mm; Basic dynamic load rating C:6440 kN; Design variant/feature:TQO/GWI; Calculation factor Y2:3; Calculation factor e:0.33; r1,2 min.:3.3 mm; T:400.05 mm; |
| AHX318 Withdrawal Sleeve (matched Bearing:2218K, 1318K, 22218EK,21318CCK, C2218K, C2218KV) | d:65mm; D:120mm; SKU:3213b-2rstn-qbl; Clearance:Standard; B:38.1mm; Cage Type:Plastic; Seals or Shields:Two Rubber Seals; Weight:0.02 KGS; Availability:In Stock; |
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
FTRE3047 Thrust Bearing Ring / Thrust Needle Bearing Washer 30x47x3mm Video