| No. | Brand | J | F | f | T | A | s | S | r |
| 51330F | SKF | - | - | - | - | - | - | - | - |
| 12/24V | - | - | - | - | - | - | - | - | - |
| BMV630 | - | - | - | - | - | - | - | - | - |
| 200W | - | - | - | - | - | - | - | - | - |
| 1-11281037-0 | - | - | - | - | - | - | - | - | - |
| 3 | - | - | - | - | - | - | - | - | - |
| 9mm | - | - | - | - | - | - | - | - | - |
| 12mm | - | - | - | - | - | - | - | - | - |
| 2-Way | - | - | - | - | - | - | - | - | - |
| 2500W | - | - | - | - | - | - | - | - | - |
| 350 | - | - | - | - | - | - | - | - | - |
| CR32 | FAFNIR | - | - | - | - | - | - | - | - |
| x320 | - | - | - | - | - | - | - | - | - |
| 15x32x8 | - | - | - | - | - | - | - | - | - |
| 1U1779 | - | - | - | - | - | - | - | - | - |
| 1pcs | - | - | - | - | - | - | - | - | - |
| F1 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 2019 | - | - | - | - | - | - | - | - | - |
| 10pcs | - | - | - | - | - | - | - | - | - |
| 36-Clips | - | - | - | - | - | - | - | - | - |
| WR125 | - | - | - | - | - | - | - | - | - |
| 1220X2440mm | - | - | - | - | - | - | - | - | - |
| 1220*2440*18mm | - | - | - | - | - | - | - | - | - |
| GE80ES | - | - | - | - | - | - | - | - | - |
| CR99111 Stainless Steel Speedi Sleeve For Shaft Repair | Seals or Shields:Two Metal Shields; SKU:6024zzc3-nsk; Oil Limiting Speed (r/min):4300; D:180mm; d:120mm; Grease Limiting Speed (r/min):3600; Dynamic Load Rating (kN):88; B:28mm; Clearance:C3; Cage Type:Steel; |
| 99339 / CR99339 Stainless Speedi Sleeve For Shaft Repair | B:126mm; D:380mm; Cage Type:Steel; Clearance:Standard; Seals or Shields:Open Type; Availability:In Stock; d:180mm; Weight:0.02 KGS; SKU:22336-e1-qbl; |
| 86973 / CR86973 Stainless Speedi Sleeve For Shaft Repair | Preload class B GB:130 N; Mass bearing:0.074 kg; Preload class A GA:45 N; rb max.:0.3 mm; Static axial stiffness, preload class C:50 N/µm; Calculation factor f1:1; Calculation factor f2A:1; Db max.:44.6 mm; Da max.:43.8 mm; Preload class C GC:260 N; |
| HMV180E / HMV 180E Hydraulic Nut 902x1075x103mm | Category:Take Up Units; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:13.62; Product Group:M06288; Component Description:Take Up Bearing Only; Rolling Element:Spherical Roller Bearing; Housing Style:Unit Only; Mounting Method:Concentric Collar; Compatible Take Up Frame:QMTF; Adjustment Travel Length:0; Insert Part Number:22215; Housing Material:Cast Steel; Other Features:Double Row | Non-expansion | Three Lip Nitrile Rubber Seal | Steel Cage | With Set Screw; |
| TRD1423 Thrust Bearing Ring / Thrust Needle Bearing Washer 22.225x36.5x3.2mm | Fillet Radius ra:4.00 mm; D:580.0000 mm; Basic Dynamic Radial Load Rating C:650000 N; Grease Speed Rating n1:1200 rpm; Fillet Radius rb:1.50 mm; Oil Speed Rating n2:1500 rpm; d:320.000 mm; Basic Static Radial Load Rating Co:1220000 N; B:92.00 mm; |
| HMV69E / HMV 69E Hydraulic Nut 347x456x64mm | Reference speed:2800 r/min; G1:16 mm; B:67 mm; Ca min.:2.1 mm; Fatigue load limit Pu:73.5 kN; G:M 105x2; ra max.:2.5 mm; Operating clearance factor k2:0.106; D1 ≈:166 mm; Basic static load rating C0:695 kN; |
| AH24138 Withdrawal Sleeve(matched Bearing:24138CCK,24138CAK, 24138CCK30/W33, C4138K30V) | Accessories:Two Shields; B:66.70 mm; Sealed Speed Rating n3:2800 rpm; Oil Speed Rating n2:3800 rpm; Basic Static Radial Load Rating Co:125000 N; D:150.0000 mm; d:70.000 mm; Grease Speed Rating n1:2800 rpm; Basic Dynamic Radial Load Rating C:153000 N; Fillet Radius ra:2.00 mm; |
| VHIN 10 Bearing Induction Heater | Limiting Speed Rating (r/min):11400; Dynamic Load Rating (kN):5.1; B:10mm; SKU:s6003-2rsr-fag; Seals or Shields:Two Rubber Seals; Static Load Rating (kN):2.6; d:17mm; Clearance:Standard; D:35mm; Weight:0.04 KGS; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
FTRD2542 Thrust Bearing Ring / Thrust Needle Bearing Washer 25x42x2.5mm Video