| No. | Brand | J | F | f | T | A | s | S | r |
| 6 | - | - | - | - | - | - | - | - | - |
| 6212-2RS-G93-C3 | - | - | - | - | - | - | - | - | - |
| 600 | - | - | - | - | - | - | - | - | - |
| 2835 | - | - | - | - | - | - | - | - | - |
| 6306 | SKF | - | - | - | 23.812 mm | - | - | - | - |
| 1 | - | - | - | - | - | - | - | - | - |
| WB000025 | Timken | - | - | - | - | - | - | - | - |
| 27687 | Bower | - | - | - | - | - | - | - | - |
| 36*1W | - | - | - | - | - | - | - | - | - |
| 1600 | - | - | - | - | - | - | - | - | - |
| 2.2 | Dodge | - | - | - | - | - | - | - | - |
| 32209/Q | SKF | - | - | - | - | - | - | - | - |
| 23996YMB | INA | - | - | - | - | - | - | - | - |
| 1200X1000 | - | - | - | - | - | - | - | - | - |
| 1.5-3mm | - | - | - | - | - | - | - | - | - |
| 27pc | - | - | - | - | - | - | - | - | - |
| 610mmx2440mm | - | - | - | - | - | - | - | - | - |
| KH3050PP | INA | - | - | - | - | - | - | - | - |
| SMD2835 | - | - | - | - | - | - | - | - | - |
| 1 | Parker | - | - | - | - | - | - | - | - |
| 16-16-16 | - | - | - | - | - | - | - | - | - |
| 23030 | NSK | - | - | - | - | - | - | - | - |
| 1100*1100*155mm | - | - | - | - | - | - | - | - | - |
| 8301-023-OMR | Parker | - | - | - | - | - | - | - | - |
| 2500W | - | - | - | - | - | - | - | - | - |
| 12v | - | - | - | - | - | - | - | - | - |
| 6008.2ZR | fag | - | 248 mm | - | - | - | - | - | - |
| TRB5266 Thrust Bearing Ring / Thrust Needle Bearing Washer 82.55x104.775x1.6mm | d:130mm; Seals or Shields:Open Type; D:210mm; Reference Speed Rating (r/min):2110; Clearance:Standard; SKU:23126-e1a-k-m-fag; Fatigue Load Rating (kN):79; Weight:0.02 KGS; Dynamic Load Rating (kN):680; Limiting Speed Rating (r/min):3000; |
| AH2308 Withdrawal Sleeve (22308EK Bearing) | r2 min.:1.1 mm; Lubricant:Regular relubricatio; M:8 mm; Basic dynamic load rating C:1120 kN; rb max.:1.1 mm; Da min.:157 mm; Specific static load factor K0:300 N/mm²; da max.:124.5 mm; b1:10 mm; ra max.:2 mm; |
| CR99186 Stainless Steel Speedi Sleeve For Shaft Repair | Clearance:Standard; B:9mm; Limiting Speed Rating (r/min):24000; d:15mm; Reference Speed Rating (r/min):--; Cage Type:Steel; D:32mm; Seals or Shields:Two Metal Shields; Dynamic Load Rating (kN):5.6; Fatigue Load Rating (kN):--; |
| CPR12130225 Thrust Plate 130x225x12mm | B:28 mm; Material constant KM:330; d2 max.:94 mm; α:6 °; Basic static load rating C0:140 kN; r1 min.:0.6 mm; Mass rod end:1.85 kg; Specific dynamic load factor K:100 N/mm²; G:M 39x3; d:40 mm; |
| AOH241/500 (241/500ECAK30/W33, C41/500K, 241/500CCK,241/500CAK Bearing Withdrawal Sleeve) | Hydraulic nut:HMV 26 E; B1:121 mm; Lock nut:KML 26; Locking device:MBL 26; Mass adapter sleeve assembly:4.25 kg; d3:155 mm; G:M 130x2; B:21 mm; d1:114.3 mm; B4:23 mm; |
| CPR81220 Thrust Plate 100x150x11.5mm | A:185 mm; Appropriate attachment bolt, rec. tightening torque:200 N·m; Mass housing:26.2 kg; H1:140 mm; Locating ring:2 x FRB 19.5/215; Oil level, min.:49 mm; P0°:800 kN; Eye bolt, size:2 x M 10; Housing:FSNL 524-620 RU; Appropriate attachment bolt, size G:16 mm; |
| CMAK 600-EN Bearing Analysis Kit | Clearance:Standard; Grease Limiting Speed (r/min):3300; Static Load Rating (kN):345; Weight:0.02 KGS; d:260mm; Oil Limiting Speed (r/min):4900; Cage Type:Plastic; Seals or Shields:Open Type; Preload:Light; D:360mm; |
| TMDT 2-33 Right Angle Surface Probe | Availability:In Stock; Weight:0.02 KGS; Seals or Shields:Open Type; B:8mm; Clearance:Standard; d:12mm; Static Load Rating (kN):6.4; SKU:2mm9101wicrdum-timke; Speed Rating (r/min):57300; Dynamic Load Rating (kN):2.9; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
FTRB1831 Thrust Bearing Ring / Thrust Needle Bearing Washer 18x31x1.5mm Video