| No. | Brand | J | F | f | T | A | s | S | r |
| r404063451 | Rexroth | - | - | - | - | - | - | - | - |
| 17X47X14 | - | - | - | - | - | - | - | - | - |
| 18mm | - | - | - | - | - | - | - | - | - |
| 2700K/3000K | - | - | - | - | - | - | - | - | - |
| PGH4 | Rexroth | - | - | - | - | - | - | - | - |
| M16 | Thomson | - | - | - | - | - | - | - | - |
| 070-0020 | Danfoss | - | - | - | - | - | - | - | - |
| 63B | - | - | - | - | - | - | - | - | - |
| 6 | - | - | - | - | - | - | - | - | - |
| 2 | - | - | - | - | - | - | - | - | - |
| Dbdh10p10b/315 | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 53mm | - | - | - | - | - | - | - | - | - |
| VT250FD | NTN | - | - | - | - | - | - | - | - |
| 22309EAK | NSK | - | - | - | - | - | - | - | - |
| S44 | RBC | - | - | - | - | - | - | 4.763 mm | - |
| 50 | John Deere | - | - | - | - | - | - | - | - |
| 96LED | - | - | - | - | - | - | - | - | - |
| 25kg/Bag | - | - | - | - | - | - | - | - | - |
| HPIB070 | - | - | - | - | - | - | - | - | - |
| 6903VV | NSK | - | - | - | - | - | - | - | - |
| 90% | - | - | - | - | - | - | - | - | - |
| PC40MR-1 | Komatsu | - | - | - | - | - | - | - | - |
| 4.8mm | - | - | - | - | - | - | - | - | - |
| A3 | - | - | - | - | - | - | - | - | - |
| JBU733 | TRW | - | - | - | - | - | - | - | - |
| 2006 | Timken | - | - | - | - | - | - | - | - |
| 151f0103 | Danfoss | - | - | - | - | - | - | - | - |
| J05E | - | - | - | - | - | - | - | - | - |
| CR99273 Stainless Steel Speedi Sleeve For Shaft Repair | Cap bolt, SAE grade:8; Appropriate attachment bolt size G:0.75 in; Bearing limiting speed:6000 r/min; P180°:31.6 kN; N1:22.225 mm; J max.:279.4 mm; Ca:57.785 mm; Mass pillow block:17.1 kg; A2:134.938 mm; P120°:30.2 kN; |
| CR99123 Stainless Steel Speedi Sleeve For Shaft Repair | B:25mm; Cage Type:Plastic; Weight:0.40 KGS; Speed Rating (r/min):4700; d:12mm; Clearance:Standard; D:55mm; Static Load Rating (kN):18; Dynamic Load Rating (kN):15.3; Seals or Shields:Two Rubber Seals; |
| TRE2840 Thrust Bearing Ring / Thrust Needle Bearing Washer 44.45x63.5x4mm | Availability:In Stock; SKU:21319-e1-k-tvpb-c3-f; Limiting Speed Rating (r/min):4000; Cage Type:Plastic; D:200mm; Dynamic Load Rating (kN):430; Static Load Rating (kN):460; Reference Speed Rating (r/min):3200; d:95mm; Fatigue Load Rating (kN):47.5; |
| EAZ 292 Induction Heater | Clearance:Standard; Fatigue Load Rating (kN):212; D:440mm; d:320mm; Limiting Speed Rating (r/min):1500; Availability:In Stock; Dynamic Load Rating (kN):1430; Seals or Shields:Open Type; Cage Type:Steel; Static Load Rating (kN):2700; |
| 86543 / CR86543 Stainless Speedi Sleeve For Shaft Repair | Reference Speed Rating (r/min):1760; Availability:In Stock; B:74mm; Clearance:Standard; Static Load Rating (kN):1450; Limiting Speed Rating (r/min):2600; Fatigue Load Rating (kN):170; d:180mm; D:280mm; Seals or Shields:Open Type; |
| 99606 / CR99606 Stainless Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; Dynamic Load Rating (kN):1090; Cage Type:Brass; SKU:23044came4-nsk; B:90mm; Static Load Rating (kN):1980; Availability:In Stock; Weight:29.70 KGS; D:340mm; Oil Limiting Speed (r/min):1200; |
| AOH24052G (24052CCK30/W33, 24052CAK, 24052CCK Bearing Withdrawal Sleeve) | B:12mm; SKU:7908ctrdudmp3-nsk; Static Load Rating (kN):11.7; Cage Type:Plastic; Grease Limiting Speed (r/min):22600; D:62mm; Clearance:Standard; Preload:Medium; Availability:In Stock; Weight:0.11 KGS; |
| TRC4860 Thrust Bearing Ring / Thrust Needle Bearing Washer 76.2x95.25x2.4mm | Initial grease fill:878.85 g; P90°:207 kN; A1:171.45 mm; End plug (suffix Y):EPR 18; Eye bolt:2 x 3/8-16 UNC; Bearing:22234 CCK/W33; S:4.763 mm; Ca:95.809 mm; PG:1/4 NPT; Cap bolt, SAE grade:8; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
FTRA1629 Thrust Bearing Ring / Thrust Needle Bearing Washer 16x29x1mm Video