| No. | Brand | J | F | f | T | A | s | S | r |
| 6207-2RS1 | SKF | - | - | - | - | - | - | - | - |
| Dh200 | - | - | - | - | - | - | - | - | - |
| 5gallon | - | - | - | - | - | - | - | - | - |
| 7216 | - | - | - | - | - | - | - | - | - |
| 23pcs | - | - | - | - | - | - | - | - | - |
| 309KZZ-2 | FAFNIR | - | - | - | - | - | - | - | - |
| Powder/Granular/200g | - | - | - | - | - | - | - | - | - |
| PC800-8 | - | - | - | - | - | - | - | - | - |
| 1040T | Rexnord | - | - | - | - | - | - | - | - |
| 70BNR10ETYNDUELP4 | NSK | - | - | - | - | - | - | - | - |
| 801234-AAA-NR | Parker | - | - | - | - | - | - | - | - |
| 12" | - | - | - | - | - | - | - | - | - |
| 6200ZZE | Nachi | - | - | - | - | - | - | - | - |
| PC200-5 | - | - | - | - | - | - | - | - | - |
| G9 | - | - | - | - | - | - | - | - | - |
| 5207ffh | Bower | - | - | - | - | - | - | - | - |
| 1220x2440mm | - | - | - | - | - | - | - | - | - |
| Ap-12 | - | - | - | - | - | - | - | - | - |
| 30X47X30 | - | - | - | - | - | - | - | - | - |
| MV-11-201-T | Parker | - | - | - | - | - | - | - | - |
| 7310 | - | - | - | - | - | - | - | - | - |
| 23996YMB | INA | - | - | - | - | - | - | - | - |
| 429,460. | - | - | - | - | - | - | - | - | - |
| AN14 | NTN | - | - | - | - | - | - | - | - |
| CP590120 Thrust Plate 90x118.8x5mm | Static axial stiffnes:790 N/µm; da min.:32 mm; D:57 mm; r3,4 min.:0.6 mm; Fatigue load limit Pu:2.2 kN; Basic dynamic load rating C:30 kN; Attainable speed:3400 r/min; d:25 mm; rb max.:0.6 mm; ra max.:0.3 mm; |
| CP480105 Thrust Plate 80x104.3x4mm | B5:82 mm; D:650 mm; Calculation factor e:0.28; Reference speed:530 r/min; Basic static load rating C0:7650 kN; db min.:421 mm; da max.:475 mm; Calculation factor Y0:2.5; d2 ≈:475 mm; r1,2 min.:6 mm; |
| 150x180x15HMSA10V Shaft Oil Seal 150x180x15mm | Cage Type:Steel; B:40mm; Weight:5.62 KGS; Availability:In Stock; Seals or Shields:Open Type; SKU:6224-fag; Fatigue Load Rating (kN):6.2; Static Load Rating (kN):122; Reference Speed Rating (r/min):4300; d:120mm; |
| CP5070 Thrust Plate 50x69.4x0.8mm | D:62mm; Weight:0.02 KGS; SKU:1206j-qbl; Seals or Shields:Open Type; Clearance:Standard; B:16mm; Availability:In Stock; d:30mm; Cage Type:Steel; |
| 99303 / CR99303 Stainless Speedi Sleeve For Shaft Repair | Oil Speed Rating n2:14000 rpm; Grease Speed Rating n1:11000 rpm; d:25.000 mm; Grease Speed Rating Open/Shielded n1:11000 rpm; D:62.0000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:21200 N; Sealed Speed Rating n3:7500 rpm; Oil Speed Rating Open/Shielded n2:14000 rpm; Basic Static Radial Load Rating Co:10800 N; |
| 25 mm x 52 mm x 22 mm FTRD4060 Thrust Bearing Ring / Thrust Needle Bearing Washer 40x60x2.5mm | Clearance:Standard; Availability:In Stock; d:65mm; B:33mm; D:140mm; Weight:0.02 KGS; Cage Type:Steel; SKU:1313j-qbl; Seals or Shields:Open Type; Size (mm):25 mm x 52 mm x 22 mm ; |
| 4620148100 BMW Gear Box Repair Kits | Availability:In Stock; Clearance:Standard; Seals or Shields:Two Teflon Seals; d:5mm; B:3mm; D:9mm; Weight:0.20 KGS; SKU:smr95-2ts-zen; Cage Type:Steel; |
| HMV41E / HMV 41E Hydraulic Nut (M205x4)x288x51mm | SKU:set-83-timken; Weight:0.02 KGS; d:44.45mm; Availability:In Stock; Dynamic Load Rating (kN):114; D:88.9mm; B:30.162mm; Static Load Rating (kN):144; |
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
FTRB1528 Thrust Bearing Ring / Thrust Needle Bearing Washer 15x28x1.5mm Video