| No. | Brand | J | F | f | T | A | s | S | r |
| 46% | - | - | - | - | - | - | - | - | - |
| 12 | - | - | - | - | - | - | - | - | - |
| NCF3006CV | SKF | - | - | - | - | - | - | - | - |
| CL2B-DAL7 | - | - | - | - | - | - | - | 4.763 mm | - |
| 12m | - | - | - | - | - | - | - | - | - |
| 3800 | - | - | - | - | - | - | - | - | - |
| 6207 | NTN | - | - | - | - | - | - | - | - |
| 21318 | SKF | - | - | - | - | - | - | - | - |
| 5x9x3mm | - | - | - | - | - | - | - | - | - |
| A10Vo | Rexroth | - | - | - | - | - | - | - | - |
| 2017 | INA | - | - | - | - | - | - | - | - |
| 350 | - | - | - | - | - | - | - | - | - |
| 20x27x4mm | - | - | - | - | - | - | - | - | - |
| SR-T03-1-12, | DAIKIN | - | - | - | - | - | - | - | - |
| Ex200 | Hitachi | - | - | - | - | - | - | - | - |
| 17" | - | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| XA81420 | Thomson | - | - | - | - | - | - | - | - |
| MBX80 | NTN | - | - | - | - | - | - | - | - |
| 1000mm | - | - | - | - | - | - | - | - | - |
| 1220mmx2440mmx18mm | - | - | - | - | - | - | - | - | - |
| 99372 / CR99372 Stainless Speedi Sleeve For Shaft Repair | Fillet Radius ra:2.00 mm; Oil Speed Rating Open/Shielded n2:4500 rpm; Basic Dynamic Radial Load Rating C:81800 N; Grease Speed Rating Open/Shielded n1:3800 rpm; Basic Static Radial Load Rating Co:73500 N; Sealed Speed Rating n3:2400 rpm; D:170.0000 mm; Accessories:Shield & Seal; B:28.00 mm; d:110.000 mm; |
| AH216 Withdrawal Sleeve 75x80x35.5mm | F:25 mm; d:20 mm; B:20 mm; Mass inner ring:0.028 kg; r, r1,2 min.:0.3 mm; |
| FTRA2035 Thrust Bearing Ring / Thrust Needle Bearing Washer 20x35x1mm | Weight:0.02 KGS; SKU:22324cc/w33-qbl; D:260mm; d:120mm; Availability:In Stock; Seals or Shields:Open Type; Cage Type:Steel; Clearance:Standard; B:86mm; |
| 99331 / CR99331 Stainless Speedi Sleeve For Shaft Repair | d:35.000 mm; Sealed Speed Rating n3:5600 rpm; Accessories:One Seal; B:38.10 mm; Grease Speed Rating n1:5600 rpm; Basic Dynamic Radial Load Rating C:49400 N; Basic Static Radial Load Rating Co:34500 N; D:80.0000 mm; Oil Speed Rating n2:7500 rpm; Fillet Radius ra:1.50 mm; |
| HMV70E / HMV 70E Hydraulic Nut 352x464x66mm | d:670 mm; Mass withdrawal sleeve:185 kg; B2:478 mm; B1:452 mm; G:Tr 710x7; Hydraulic nut:HMV 142 E; G2:G 1/4; A:12 mm; G1:40 mm; Nut for removal:HM 31/710; |
| AH308 Withdrawal Sleeve | Limiting Speed Rating (r/min):28000; Reference Speed Rating (r/min):43000; B:11mm; Static Load Rating (kN):3.75; D:35mm; Clearance:Standard; d:15mm; Cage Type:Steel; Condition:New; Weight:0.02 KGS; |
| 99401 / CR99401 Stainless Speedi Sleeve For Shaft Repair | Calculation factor X:0.54; Limiting speed:3000 r/min; Basic dynamic load rating C:520 kN; Basic static load rating C0:865 kN; r0:2 mm; d1 ≈:260 mm; ra max.:3 mm; r1,2 min.:4 mm; Calculation factor e:1.34; Calculation factor Y0:0.44; |
| EAZ 312 Induction Heater | Availability:In Stock; SKU:3201b-2znrtnc3-nsk; Static Load Rating (kN):5650; Clearance:C3; Grease Limiting Speed (r/min):15000; Dynamic Load Rating (kN):11100; B:15.9mm; Cage Type:Plastic; Weight:0.02 KGS; Seals or Shields:Two Metal Shields; |
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
FTRE1326 Thrust Bearing Ring / Thrust Needle Bearing Washer 13x26x3mm Video