| No. | Brand | J | F | f | T | A | s | S | r |
| 14 | - | - | - | - | - | - | - | - | - |
| WB000025 | Timken | - | - | - | - | - | - | - | - |
| 5PCS | - | - | - | - | - | - | - | - | - |
| SF-G02-060-15 | DAIKIN | - | - | - | - | - | - | - | - |
| 520 | - | - | - | 8 mm | - | - | - | - | - |
| GS1268 | - | - | - | - | - | - | - | - | - |
| 90lm/W | - | - | - | - | - | - | - | - | - |
| 20 | Rexroth | - | - | - | - | - | - | - | - |
| 32MCY14-1D/T | - | - | - | - | - | - | - | - | - |
| 150lm/W | - | - | - | - | - | - | - | - | - |
| 10 | - | - | - | - | - | 8 mm | - | - | - |
| 3LB1 | - | - | - | - | - | - | - | - | - |
| IR110X120X30 | INA | - | - | - | - | - | - | - | - |
| (Zhv74) | - | - | - | - | - | - | - | - | - |
| (JS-SSN003) | - | - | - | - | - | - | - | - | - |
| 950-1050lm, | - | - | - | - | - | - | - | - | - |
| 962985 | - | - | - | - | - | - | - | - | - |
| 6805BNLS | Nachi | - | 35 mm | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| TRC-411 | koyo | - | - | - | - | - | - | - | - |
| FZX750 | - | - | - | - | - | - | - | - | - |
| AH24034 Withdrawal Sleeve(matched Bearing:24034CAK,24034CCK,24034CCK30/W33, C4034K30V) | Lock washer:MB 40; Appropriate attachment bolt, size G:30 mm; Mass housing:139 kg; ba min.:101 mm; Q180°:900 kN; s:12 mm; J:540 mm; P0°:3100 kN; L:640 mm; P90°:1900 kN; |
| TRA2031 Thrust Bearing Ring / Thrust Needle Bearing Washer 31.75x49.2x0.8mm | Basic dynamic load rating C:680 kN; r1,2 min.:2.1 mm; G1:15 mm; Fatigue load limit Pu:100 kN; G:M 155x3; Da max.:214 mm; Basic static load rating C0:1040 kN; Calculation factor e:0.3; Calculation factor Y0:2.2; Mass bearing + sleeve:11.3 kg; |
| AH3034 Withdrawal Sleeve(matched Bearing:23034CCK/W33, C3034K) | B:27.00 mm; Basic Static Radial Load Rating Co:20400 N; D:62.0000 mm; Basic Dynamic Radial Load Rating C:28600 N; Oil Speed Rating n2:9500 rpm; Fillet Radius ra:1.00 mm; Accessories:No Shield, no Seal; Grease Speed Rating n1:7000 rpm; Sealed Speed Rating n3:7000 rpm; d:30.000 mm; |
| CR99179 Stainless Steel Speedi Sleeve For Shaft Repair | Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:117000 N; D:190.0000 mm; Oil Speed Rating n2:3800 rpm; Grease Speed Rating n1:3200 rpm; B:43.00 mm; d:90.000 mm; Basic Static Radial Load Rating Co:44000 N; |
| CP475100 Thrust Plate 75x99.3x4mm | D:200mm; Availability:In Stock; SKU:23124-e1a-m-qbl; Clearance:Standard; Weight:0.02 KGS; d:120mm; Cage Type:Brass; Seals or Shields:Open Type; B:62mm; |
| CR99106 Stainless Steel Speedi Sleeve For Shaft Repair | Dimension N:19.8 mm; Dimension D2:68.3 mm; Dimension S1:22.2 mm; Pin Dia A1:6.4 mm; Dimension L:109.5 mm; Dimension G:12.7 mm; Shaft Diameter D:30 mm; Dimension H:25.4 mm; Dimension J:7.9 mm; Width A:34.9 mm; |
| AH24126 Withdrawal Sleeve(matched Bearing:24126CCK/W33, C4126K30) | d:30mm; Availability:In Stock; Weight:0.11 KGS; Static Load Rating (kN):16.8; Speed Rating (r/min):25500; SKU:2mm9106wicrsuh-timke; Clearance:Standard; Dynamic Load Rating (kN):10.3; Cage Type:Plastic; B:13mm; |
| AH310 Withdrawal Sleeve 45x50x35mm | Basic Dynamic Radial Load Rating C:58500 N; Fillet Radius ra:1.50 mm; d:60.000 mm; B:22.00 mm; D:110.0000 mm; Grease Speed Rating n1:5000 rpm; Basic Static Radial Load Rating Co:45500 N; Oil Speed Rating n2:6700 rpm; |
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
FTRB1226 Thrust Bearing Ring / Thrust Needle Bearing Washer 12x26x1.5mm Video