| No. | Brand | J | F | f | T | A | s | S | r |
| 10pcs | - | - | - | - | - | - | - | - | - |
| IP65 | - | - | - | - | 66.675 mm | - | - | - | - |
| 3mm | - | - | - | - | - | - | - | - | - |
| #HR32207J | NSK | - | - | - | - | - | - | - | - |
| 20W | - | - | - | - | - | - | - | - | - |
| (HJ-4202) | - | - | - | - | - | - | - | - | 1.1 mm |
| 2x | TRW | - | - | - | 36 mm | - | - | - | - |
| 6207 | NTN | - | - | - | - | - | - | - | - |
| 6704-2RS | - | - | - | - | - | - | - | - | - |
| 3-Tier | - | - | - | - | - | - | - | - | - |
| 610mmx2440mm | - | - | - | - | - | - | - | - | - |
| 3W | - | - | - | - | - | - | - | - | - |
| (6D31) | - | - | 26.5 mm | - | - | - | - | - | - |
| IP65 | - | - | - | - | - | - | - | - | - |
| 21318 | SKF | - | - | - | - | - | - | - | - |
| 5 | - | - | - | - | - | - | - | - | - |
| (CC24SC, | INA | - | - | - | - | - | - | - | - |
| 21' | - | - | - | - | - | - | - | - | - |
| 25mm | - | - | - | - | - | - | - | - | - |
| E0 | - | - | - | - | - | - | - | - | - |
| 609 | - | - | - | - | - | - | - | - | - |
| IP68 | - | - | - | - | - | - | - | - | - |
| 24136-BE-XL | - | - | - | - | - | - | - | - | - |
| A11VO | Rexroth | - | - | - | - | - | - | 3.175 mm | - |
| NH4CL | - | - | - | - | - | - | - | - | - |
| ,I010 | - | - | - | - | - | - | - | - | - |
| 2016 | - | - | - | - | - | - | - | - | - |
| 170x200x15HMSA10RG Shaft Oil Seal 170x200x15mm | Reference Speed Rating (r/min):1500; Availability:In Stock; Limiting Speed Rating (r/min):1300; Static Load Rating (kN):1290; d:140mm; Cage Type:Brass; D:225mm; B:85mm; Clearance:Standard; SKU:24128emw33w25-timken; |
| TRD3446 Thrust Bearing Ring / Thrust Needle Bearing Washer 53.975x73.025x3.2mm | SKU:6318z-nsk; B:43mm; Cage Type:Steel; D:190mm; Grease Limiting Speed (r/min):3600; Dynamic Load Rating (kN):143; Weight:4.98 KGS; Clearance:Standard; Static Load Rating (kN):107; Availability:In Stock; |
| CR99227 Stainless Steel Speedi Sleeve For Shaft Repair | Seals or Shields:Open Type; B:112mm; d:200mm; Cage Type:Steel; Dynamic Load Rating (kN):1360; Availability:In Stock; Weight:42.70 KGS; SKU:23140ce4c3-nsk; Clearance:C3; D:340mm; |
| CR99174 Stainless Steel Speedi Sleeve For Shaft Repair | Reference Speed Rating (r/min):17000; Limiting Speed Rating (r/min):17000; Static Load Rating (kN):5.8; SKU:630052rs-timken; Cage Type:Steel; Availability:In Stock; B:16mm; Seals or Shields:Two Rubber Seals; d:25mm; Weight:0.11 KGS; |
| AH317 Withdrawal Sleeve 80x85x52mm | SKU:21314-e1-tvpb-fag; D:150mm; Availability:In Stock; Limiting Speed Rating (r/min):5000; Static Load Rating (kN):270; Clearance:Standard; d:70mm; B:35mm; Seals or Shields:Open Type; Cage Type:Plastic; |
| 85800 / CR85800 Stainless Speedi Sleeve For Shaft Repair | SKU:23220cke4c3-nsk; Seals or Shields:Open Type; d:100mm; Cage Type:Steel; Grease Limiting Speed (r/min):1600; Availability:In Stock; Static Load Rating (kN):605; Oil Limiting Speed (r/min):2200; Weight:6.60 KGS; Dynamic Load Rating (kN):420; |
| CR99059 Stainless Steel Speedi Sleeve For Shaft Repair | Static Load Rating (kN):9.58; Speed Rating (r/min):47800; D:35mm; Cage Type:Plastic; Availability:In Stock; Seals or Shields:Open Type; Weight:0.04 KGS; SKU:2mm202wicrsul-timken; B:11mm; Dynamic Load Rating (kN):4.5; |
| 99294 / CR99294 Stainless Speedi Sleeve For Shaft Repair | Reference Speed Rating (r/min):12000; Static Load Rating (kN):20.3; d:45mm; Limiting Speed Rating (r/min):8200; D:85mm; B:19mm; Availability:In Stock; Cage Type:Steel; Clearance:Standard; Dynamic Load Rating (kN):31.2; |
Withdrawal sleeves | SKF
Withdrawal sleeves can be used to mount bearings with a tapered bore onto the cylindrical seat of ... The sleeve is located on the shaft by a nut or an end plate
Withdrawal Sleeves – PTI
Withdrawal sleeves are suitable for mounting tapered bore bearings on stepped shafts with a cylindrical seat. The withdrawal sleeve is pressed into the bearings
Adapters, Withdrawal Sleeves, Locknuts ... - NTN Global
shaft easier, particularly with large bearing. Withdrawal Sleeves. Withdrawal sleeves are used to mount tapered bore bearings on shafts. Withdrawal sleeve nuts
Withdrawal sleeves for spherical roller bearings - NTN Global
1）Standard thread shapes and dimensions are as per JIS B0207 (metric thread). 2）Indicates reference dimensions before attachment of withdrawal sleeve
What are bearing withdrawal sleeves? - Design World
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed component. The sleeve is then located on the shaft by a nit or an end plate. For
Adapter and Withdrawal Sleeves | KG International FZCO
Withdrawal sleeve. To mount bearings with a tapered bore on the cylindrical seat of stepped shafts The sleeve is pressed into the bore of the bearing inner ring,
What are bearing withdrawal sleeves? | Bearing Tips
Oct 30, 2018 - The sleeve is pressed into the bearing bore that abuts a fixed ... can ease this process with both adapter sleeves and withdrawal sleeves. SKF
Buy Bearing Withdrawal Sleeves | Hydraulic Pump Parts
Results 1 - 36 of 102 - A bearing withdrawal sleeve is typically used on hydraulic pumps. They are designed for the purpose of mounting tapered bore bearings
Withdrawal Sleeves | Applied
Items 1 - 20 of 318 - 70 mm Sleeve Bore x 68 mm Long; Removal Nut KM17; Use w/Bearing Series 2300K, 22300K, 23200K; 75 mm Bearing Bore. My Applied
FTRC1024 Thrust Bearing Ring / Thrust Needle Bearing Washer 10x24x2mm Video